Kyocera KM 1635 User Manual

							System Setting 
OPERATION GUIDE5-9
1Display the System Menu. (Refer to System Menu Operations 
Procedures on page 5-7.)
2Press U or V to display 02.Language.
3Press [OK].
4Press U or V. The display cycles through the available selection in the 
following order:
5Press [OK]. The display will return to that of Step 2.
Original Image Quality
Sets the original image quality that will be selected at the time the copier is 
turned on.
1Display the System Menu. (Refer to System Menu Operations 
Procedures on page 5-7.)
2Press U or V to display 03.Image 
Quality.
3Press [OK].
4Press U or V and select Text+Ph Dens, Photo Density or Text 
Density.
5Press [OK]. The display will return to that of Step 2.
Initial Density
Sets the copy density at the time the copier is turned on to Manual or 
Automatic.
System Menu:
02.Language
Inch specifications Metric specifications
English English
Francais Deutsch
Espanol Francais
Japanese Espanol
Portugues Italiano
System Menu:
03.Image Quality
Downloaded From ManualsPrinter.com Manuals 
						

							System Setting 
5-10OPERATION GUIDE
1Display the System Menu. (Refer to System Menu Operations 
Procedures on page 5-7.)
2Press U or V to display 04.Initial 
Dens.
3Press [OK].
4Press U or V and select Manual or Auto.
5Press [OK]. The display will return to that of Step 2.
EcoPrint
Selects the initial value of EcoPrint when the power is turned on. The initial 
value of the EcoPrint can also be set to on (Enable).
1Display the System Menu. (Refer to System Menu Operations 
Procedures on page 5-7.)
2Press U or V to display 05.EcoPrint.
3Press [OK].
4When EcoPrint is to be used as the initial value press V and select On 
(Enable).
5Press [OK]. The display will return to that of Step 2.
Exposure Steps
Changes the number of steps for the copy’s exposure. 
1Display the System Menu. (Refer to System Menu Operations 
Procedures on page 5-7.)
2Press U or V to display 06.Density 
steps.
3Press [OK].
4Press U or V and select 1 Step, or 0.5 Step.
5Press [OK]. The display will return to that of Step 2.
System Menu:
04.Initial Dens.
System Menu:
05.EcoPrint
System Menu:
06.Density steps
Downloaded From ManualsPrinter.com Manuals 
						

							System Setting 
OPERATION GUIDE5-11
Auto Exposure Adjustment
Adjusts the overall exposure of the copy when Auto Exposure Mode is 
used.
1Display the System Menu. (Refer to System Menu Operations 
Procedures on page 5-7.)
2Press U or V to display 07.Auto 
Density.
3Press [OK].
4Press U or V and select an exposure from 1 to 7.
5Press [OK]. The display will return to that of Step 2.
Text + Photo Mode Exposure Adjustment
Adjusts the median exposure value of the copy for the Text + Photo 
original.
1Display the System Menu. (Refer to System Menu Operations 
Procedures on page 5-7.)
2Press U or V to display 08.Text+Ph 
Dens.
3Press [OK].
4Press U or V and select an exposure from 1 to 7.
5Press [OK]. The display will return to that of Step 2.
Photo Exposure Adjustment
Adjusts the median exposure value of the copy for the Photo original.
1Display the System Menu. (Refer to System Menu Operations 
Procedures on page 5-7.)
2Press U or V to display 09.Photo 
Density.
3Press [OK].
System Menu:
07.Auto Density
System Menu:
08.Text+Ph Dens.
System Menu:
09.Photo Density
Downloaded From ManualsPrinter.com Manuals 
						

							System Setting 
5-12OPERATION GUIDE
4Press U or V and select an exposure from 1 to 7.
5Press [OK]. The display will return to that of Step 2.
Text Exposure Adjustment
Adjusts the median exposure value of the copy for the Text original.
1Display the System Menu. (Refer to System Menu Operations 
Procedures on page 5-7.)
2Press U or V to display 10.Text 
Density.
3Press [OK].
4Press U or V and select an exposure from 1 to 7.
5Press [OK]. The display will return to that of Step 2.
Processing to Reduce Black Line
It is possible to make black line less noticeable when it appears when using 
the optional Document Processor. Using processing to reduce black line 
decreases the reproduction quality of small characters, so it is 
recommended that the copier normally be used at the factory default 
setting.
NOTE: When Photo Mode has been selected in Image Quality Mode, 
processing to reduce black line is not possible.
1Display the System Menu. (Refer to System Menu Operations 
Procedures on page 5-7.)
2Press U or V to display 
11.ReduceStreaks.
3Press [OK].
4Press U or V and select Off, Weak or Strong.
5Press [OK]. The display will return to that of Step 2.
Photo Processing
Select the processing method for photo originals.
System Menu:
10.Text Density
System Menu:
11.ReduceStreaks
Downloaded From ManualsPrinter.com Manuals 
						

							System Setting 
OPERATION GUIDE5-13
1Display the System Menu. (Refer to System Menu Operations 
Procedures on page 5-7.)
2Press U or V to display 
12.OptimizePhoto.
3Press [OK].
4Press U or V and select ErrorDiffusion, or Dither Matrix.
5Press [OK]. The display will return to that of Step 2.
Background Adjustment
The background can be lightened when it is found to be too dark after 
copying.
1Display the System Menu. (Refer to System Menu Operations 
Procedures on page 5-7.)
2Press U or V to display 
13.OptimizBackgr.
3Press [OK].
4Press U or V and select a background color exposure from 1 to 5.
5Press [OK]. The display will return to that of Step 2.
Cassette Selection
Selects whether the cassette with the same size of paper as the original 
size will be automatically selected or whether a selected cassette level 
(fixed) is to be used.
1Display the System Menu. (Refer to System Menu Operations 
Procedures on page 5-7.)
2Press U or V to display 14.Initial 
Paper.
3Press [OK].
4Press U or V and select Auto, or DefaultCassette.
System Menu:
12.OptimizePhoto
System Menu:
13.OptimizBackgr
System Menu:
14.Initial Paper
Downloaded From ManualsPrinter.com Manuals 
						

							System Setting 
5-14OPERATION GUIDE
5Press [OK]. The display will return to that of Step 2.
Selecting Media Types for Automatic Paper Selection
Specifies the type of media when the copier automatically selects the copy 
paper according to the size of the original. The type of media can be 
specified from the following types of paper supported.
Plain, Transparency, Rough, Vellum, Labels, Recycled, Preprinted, Bond, 
Cardstock, Color (Colour), Prepunched, Letterhead, Thick paper, 
Envelope, High Quality and Custom 1-8
When Plain is selected in the following example, the copier looks for the 
cassette or MP tray in which the paper of the matching type (plain) and size 
(of the original document) is loaded and begins copying.
NOTE: To assign media type to cassette according to the type of the 
media loaded, refer to Selecting Media Type (Cassettes 1 to 4) on page 5-
17 for details.
1Display the System Menu. (Refer to System Menu Operations 
Procedures on page 5-7.)
2Press U or V to display 15.AutoSel 
Paper.
3Press [OK].
4Press U or V to select the desired media type.
5Press [OK]. The display will return to that of Step 2.
Selected Cassette
When the optional Paper Feeder is installed, priority will be assigned to the 
cassette that is selected automatically. Manual paper feeding cannot be 
set using the Selected Cassette function.
1Display the System Menu. (Refer to System Menu Operations 
Procedures on page 5-7.)
2Press U or V to display 
16.DefaultCasset.
3Press [OK].
4Press U or V and select the cassette to be given priority for use.
System Menu:
15.AutoSel Paper
System Menu:
16.DefaultCasset
Downloaded From ManualsPrinter.com Manuals 
						

							System Setting 
OPERATION GUIDE5-15
NOTE: The range of selection will vary in accordance with the number of 
cassettes installed.
5Press [OK]. The display will return to that of Step 2.
Auto Cassette Switching
When the optional Paper Feeder has been installed, select whether or not 
to use the Auto Cassette Switching function.
1Display the System Menu. (Refer to System Menu Operations 
Procedures on page 5-7.)
2Press U or V to display 
17.AutoCassetSet.
3Press [OK].
4Press U or V and select Disting. paper when the Auto Cassette 
Switching function is to be used and Not dist. paper when it will not 
be used.
5Press [OK]. The display will return to that of Step 2.
Auto Sizing
Sets whether or not to use automatic sizing (zoom/reduction percentage) 
when a paper cassette has been selected.
1Display the System Menu. (Refer to System Menu Operations 
Procedures on page 5-7.)
2Press U or V to display 
18.PriorAutoZoom.
3Press [OK].
4Press U or V and select On when the Automatic Sizing function is to be 
used and Off when copies are to be taken at a 1:1 ratio.
5Press [OK]. The display will return to that of Step 2.
Inputting Custom Sizes
Sizes that are not displayed on the Operation Panel are registered as 
Custom Sizes.
System Menu:
17.AutoCassetSet
System Menu:
18.PriorAutoZoom
Downloaded From ManualsPrinter.com Manuals 
						

							System Setting 
5-16OPERATION GUIDE The setting of Custom Size 1 is shown here as an example. To set Custom 
Size 2 select 25.Custom Size 2 in the System Menu and then perform 
the same settings.
1Display the System Menu. (Refer to System Menu Operations 
Procedures on page 5-7.)
2Press U or V to display the 24.Custom 
Size1.
3Press [OK].
4Press U or V and select the size. The paper sizes displayed are as shown 
in the table below. When selecting Irregular Sizes, carry out the following 
procedure. In the case of the selection of other sizes, proceed to Step 9.
5Press [OK]. The Width can be input after 2 blinks.
6Press U or V and input the Length Size. 
3.88 to 11.63()/98 to 297 (mm): The range 
in which setting is possible.
7Press [OK]. The Width can be input after 2 blinks.
System Menu:
24.Custom Size 1
Inch specifications Metric specifications
A3 R B5 R
A4 R B6 R
A4 A6 R
A5 R Cardstock
A6 R Ledger R
B4 R Legal R
B5 R Letter R
B5 Letter
B6 R Statement R
11×15 R Oficio 2
Folio R 11×15 R
Cardstock Customized Size
Customized Size
Non-std size L
           297mm
Downloaded From ManualsPrinter.com Manuals 
						

							System Setting 
OPERATION GUIDE5-17
8Press U or V and input the Width Size. 
5.88 to 17.00()/148 to 432 (mm): The range 
in which setting is possible.
9Press [OK]. The display will return to that of Step 2.
Selecting Media Type (Cassettes 1 to 4)
Specifies the media type to the cassette 1 to 4. These cassettes support 
the following media type.
Plain, Preprinted, Bond, Recycled, Rough, Letterhead, Color (Colour), 
Prepunched, High Quality and Custom 1-8
The setting of Cassette 1 is shown here as an example, select 
27.Casst2MedType, 28.Casst3MedType and 29.Casst4MedType in 
the System Menu before selecting Cassette 2, 3 and 4 (option), 
respectively.
1Display the System Menu. (Refer to System Menu Operations 
Procedures on page 5-7.)
2Press U or V to display 
26.Casst1MedType.
3Press [OK].
4Press U or V to select the desired media type.
5Press [OK]. The display will return to that of Step 2.
Specifying the Paper Weight and 2-sided Copying to Custom Paper
Assigns one of  the following paper weights to the Custom paper. And you 
can determine whether 2-sided copying is allowed to the custom paper. Up 
to 8 custom paper are configurable.
Extra Heavy, Heavy3, Heavy2, Heavy1, Normal3, Normal2, Normal1 and 
Light (Vellum)
The setting of Custom 1 is shown here as an example, select 
31.CustmMedType2, 32.CustmMedType3, 33.CustmMedType4, 
34.CustmMedType5, 35.CustmMedType6, 36.CustmMedType7 and 
37.CustmMedType8 in the System Menu before selecting Custom 2, 3, 
4, 5, 6, 7 and 8, respectively.
NOTE: 2-sided Copying setting will be displayed only when the optional 
Duplex Unit is installed.
Refer to the following media types and weights (g/m
2)
Non-std size W
           148mm
System Menu:
26.Casst1MedType
Downloaded From ManualsPrinter.com Manuals 
						

							System Setting 
5-18OPERATION GUIDE •Extra Heavy - OHP sheet
•Heavy 3 - from 171 g/m
2 to 209 g/m2
•Heavy 2 - from 136 g/m2 to 170 g/m2
•Heavy 1 - from 106 g/m2 to 135 g/m2
•Normal 3 - from 91 g/m2 to 105 g/m2
•Normal 2 - from 76 g/m2 to 90 g/m2
•Normal 1 - from 60 g/m2 to 75 g/m2
•Light (Vellum) - from 60 g/m2 to 64 g/m2
1Display the System Menu. (Refer to System Menu Operations 
Procedures on page 5-7.)
2Press U or V to display 
30.CustmMedType1.
3Press [OK].
4Press U or V to select the desired media type.
5Press [OK]. When the optional Duplex Unit is not installed, the display will 
return to that of Step 2.
6Press U or V and select On when the 2-sided Copying is to be used and 
Off when it will not be used.
7Press [OK]. The display will return to that of Step 2.
Auto Detect Originals
Allows you to predetermine what paper size is selected for printing when 
copying an original document of non-standard sizes (Refer to below). This 
feature is applicable when the size of the original is either Hagaki, A6R, 
B4R or Folio. The menu also provides the means to determine whether 11 
x 15 is recognized as a standard size.
The setting of Hagaki or A6R is shown here as an example, select 
39.B4R/Folio Det and 40.11x15 Detect in the System Menu 
before selecting B4R and 11 x 15, respectively.
NOTE: This setting is only available for metric models.
1Display the System Menu. (Refer to System Menu Operations 
Procedures on page 5-7.)
2Press U or V to display 38.Hagaki/
A6RDet.
System Menu:
30.CustmMedType1
System Menu:
38.Hagaki/A6RDet
Downloaded From ManualsPrinter.com Manuals