Kyocera FS C8500DN User Manual

Using the Operation Panel 4-55
Print Settings
These settings specify the following printing parameters: paper feed 
source, paper feed mode, duplex printing, override A4/LTR, emulation 
mode, color mode, print quality, and setting pagination.
• Paper Source (Selecting the paper feed source)
• Paper Feed Mode (Setting the paper feed source)
• Duplex (Setting the duplex printing)
• Paper Output (Selecting the Paper Output Location)
• Override A4/LTR (Overriding difference between A4 and Letter)
• Emulation...

4-56Using the Operation Panel 
Paper Feed Mode (Setting the paper feed source)
This mode specifies how the paper should be fed once the paper feed 
source and paper type have been chosen. If Auto is selected, the printer 
searches for a paper feed source that matches the paper size and type, 
and paper is then delivered from that source. If Fixed is selected and 
there is no matching paper feed source, handling proceeds as specified 
by Paper Mismatch for Error Handling. For details on paper 
feeding...

Using the Operation Panel 4-57
Duplex (Setting the duplex printing)
Using the duplexer, you can automatically print on both sides of the paper. 
The duplexer is mounted underneath the printer.
Duplex printing is only available for those media types that can be fed 
from one of the cassettes. 
Duplex printing is available for the following paper(media) types:
PLAIN
PREPRINTED
BOND
RECYCLED
ROUGH
LETTERHEAD
COLOR
COATED
PREPUNCHED
HIGH QUALITY
Binding Modes
Binding refers to the manner in which printed...

4-58Using the Operation Panel 
2Press [OK]. The Duplex screen  appears showing the list of 
available duplex printing modes.
3Press U or V to select the desired duplex printing mode.
The message display toggles through the following:
Off (default)
Bind Long Edge
Bind Short Edge
Selecting Off disables duplex printing.
4Press [OK]. The duplex printing mode is set and the Print Settings 
menu reappears.
Paper Output (Selecting the Paper Output Location)
This setting can be specified when an optional...

Using the Operation Panel 4-59
Tray 3 Face UP*
Tray 3 Face Down*
Tray 4 Face UP*
Tray 4 Face Down*
Tray 5 Face UP*
Tray 5 Face Down*
Tray 6 Face UP*
Tray 6 Face Down*
Tray 7 Face UP*
Tray 7 Face Down*
*Tray of optional mail box
Document Finisher installed
TopTray FaceDown
Finisher FaceUP
FinisherFaceDown
4Press [OK]. The selected output location is stored and the Print 
Settings menu reappears.
Override A4/LTR (Overriding difference between A4 and 
Letter)
When the Override A4/LTR is turned On using the...

4-60Using the Operation Panel 
2Press [OK]. The Emulation Set. menu screen appears.
3Press U or V to select Emulation.
4Press [OK]. The Emulation screen  appears showing a list of the 
available emulations.
The available emulations are as follows:
PCL6
KPDL
KPDL(Auto)
5Press U or V to select the desired emulation.
6Press [OK]. The emulation is set and the Print Settings menu 
reappears.
Error Report (Printing KPDL errors)
The printer can print error descriptions when printing error occurs during 
KPDL...

Using the Operation Panel 4-61
Color Mode (Selecting color or black & white printing)
When executing printing at the printer, you can select Color mode or 
Black & White mode. By default, the printer is set to print in color mode.
1In the Print Settings menu, press U or V to select Color Mode.
2Press [OK]. The Color Mode screen  appears.
3Press U or V to select the desired color mode.
4Press [OK]. The color mode is set and the Print Settings menu 
reappears.
Print Quality (Selecting the EcoPrint mode)
By...

4-62Using the Operation Panel 
Page Setting (Setting pagination)
You can use the Page Setting menu to set the number of copies, the page 
orientation and other pagination settings.
The options available in Page Setting are as follows:
• Copies (Number of copies)
• Orientation (Print orientation)
• Wide A4 (Wide A4 pitch)
• XPS FitTo Page (Adjusting the XPS file print out size)
• TIFF/JPEG Size (Adjusting the TIFF/JPEG file print out size)
1In the Print Settings menu, press U or V to select Page Setting....

Using the Operation Panel 4-63
1In the Page Setting menu, press U or V to select Orientation.
2Press [OK]. The Orientation screen  appears.
3Press U or V to select the desired Orientation.
4Press [OK]. The orientation is set and the Page Setting menu 
reappears.
Wide A4 (Wide A4 pitch)
Turn this to On to increase the maximum number of characters that can 
be printed in a line for an A4 page (78 characters at 10 pitch) and Letter 
size page (80 characters at 10 pitch). This setting is only effective in...

4-64Using the Operation Panel 
TIFF/JPEG Size (Adjusting the TIFF/JPEG file print out size)
Use this setting to select the printing method used when TIFF or JPEG 
files are printed directly.
1In the Page Setting menu, press U or V to select TIFF/JPEG Size.
2Press [OK]. The TIFF/JPEG Size screen appears.
The options available in TIFF/JPEG Size are as follows:
Paper Size (default)
Images are resized so that they fill the paper size when printed.
Image Resolution
Image files are printed at the resolution...