Kyocera FS C8500DN User Manual

Using the Operation Panel 4-15
Font List (Printing a list of the printers fonts)
To help you decide in selecting a font, you can printout lists of the internal 
fonts and the optional fonts.
1In the Report Print menu, press U or V to select Font List.
2Press [OK]. A confirmation message is displayed.
3Press [Yes] ([Left Select]). The message Accepted. appears and 
the printer prints the font list.
Pressing [No] ([Right Select]) returns you to the Report Print menu 
without printing the font list.
HDD...

4-16Using the Operation Panel 
USB Memory (USB memory selection)
This specifies the settings for removing the USB memory and printing 
USB memory content.
IMPORTANT  This menu only appears when the block setting of the 
USB memory slot is set to 
Unblock. For details, refer to I/F Block Set. 
(External interface block setting) on page 4-92.
The options available in the USB Memory menu are as follows:
• Print File List (Printing and checking the files in the USB memory)
Print File (Prints the selected...

Using the Operation Panel 4-17
Print File (Prints the selected file)
You can use this to specify printing for files in the USB memory.
1Use the procedure described in Print File List (Printing and checking 
the files in the USB memory) on page 4-16 to display a list of the files 
in the folder containing the file you want to print.
2Press U or V to select the file you want to print.
3Press [OK]. The Copies menu screen appears.
4To print 2 or more copies, use the arrow keys to set the number of 
copies to...

4-18Using the Operation Panel 
1In the Copies menu or the Paper Selection menu, press 
[Function] ([Right Select]). The Function menu appears.
2Press U or V to select Paper Output.
3Press [OK]. The Paper Output menu appears showing the 
available output locations.
4Press U or V to select the desired output location.
5Press [OK]. The selected output location is stored and the Function 
menu reappears.
Duplex (Setting the duplex printing)
Set duplex printing. For details, refer to Duplex (Setting the...

Using the Operation Panel 4-19
Encrypted PDF (PDF password entry)
The password of a PDF file can be entered.
1In the Copies menu or the Paper Selection menu, press 
[Function] ([Right Select]). The Function menu appears.
2Press U or V to select Encrypted PDF.
3Press [OK]. The Password input menu screen appears.
4Move the cursor up and down with U and V, and right and left with 
Y and Z, and input the set password by pressing the [OK] key. 
You can go back one character by pressing [Bckspace] ([Left...

4-20Using the Operation Panel 
5Press [OK]. The TIFF/JPEG Size setting is set and the Function 
menu reappears.
XPS FitTo Page (Adjusting the XPS file print out size)
Select On in this setting to enlarge or reduce XPS files to fit the printable 
area during printing.
1In the Copies menu or the Paper Selection menu, press 
[Function] ([Right Select]). The Function menu appears.
2Press U or V to select XPS FitTo Page.
3Press [OK]. The XPS FitTo Page screen appears.
4Press U or V to select whether XPS FitTo...

Using the Operation Panel 4-21
If you selected a file, there are 4 Detail screens. Press Y or Z to 
move between the screens.
If the entire name shown as the File Name or Folder Name will 
not fit on one line, pressing [Detail] ([Right Select]) changes to a 
3-line name display. If the name is 3 or more lines long, you can scroll 
up or down by pressing U or V.
Pressing [OK] while file or folder details are displayed returns you to 
the USB Memory menu.
Remove Memory (Removing the USB memory)
Allows you...

4-22Using the Operation Panel 
Custom Box
A Custom Box is a general-purpose box that allows users to store print 
data on the printers hard disk so that it can be reused as required.
Use the COMMAND CENTER to create or delete a Custom Box, or to set 
a Box Password. For more information, refer to the COMMAND CENTER 
Operation Guide and Printer Driver User Guide.
Use the printers operation panel to print the print data stored in a Custom 
Box.
The options available in Custom Box are as follows:
• Box...

Using the Operation Panel 4-23
Box Password (input of the password)
The user who can access it can be limited by putting the password on the 
Custom Box. The password is set from COMMAND CENTER.
1If you have set a password for the selected Custom Box, a password 
input screen appears.
Press U, V, Y, or Z to select characters, and then press [OK] to 
enter the password.
You can go back one character by pressing [Bckspace] ([Left 
Select]).
2When the password has been entered, press [Enter] ([Right...

4-24Using the Operation Panel 
Print a File
Print the file(s) selected in the Custom Box.
1In the file list screen, select an item other than All Files and press 
[OK]. The Print/Delete menu screen appears.
2Press U or V to select Print.
3Press [OK]. The Copies menu screen appears.
If you want to change the number of remaining copies to be printed, 
use the arrow keys to set the number of copies to be printed.
Press U or V to increase or decrease, respectively, the value at the 
blinking cursor.
Use Y...