Kyocera FS C8500DN User Manual

Handling Paper 3-11
Thick Paper
Fan the stack of paper and align the edges before loading them in the MP 
tray. Some types of paper have rough edges on the back (those are 
created when the paper is cut). In this case, put the paper on a flat place 
and rub the edges once or twice with, for example, a ruler to smooth them. 
Feeding rough edged paper may cause paper jams.
Colored Paper
Colored paper should satisfy the same conditions as white bond paper, 
refer to Paper Specifications on page 3-2. In...

3-12Handling Paper 
Paper Type
The printer is capable of printing under the optimum setting for the type of 
paper being used.
Setting the paper type for the paper source from the printer’s operation 
panel will cause the printer to automatically select the paper source and 
print in the mode best suited to that type of paper. 
A different paper type setting can be made for each paper source 
including the MP tray. Not only can preset paper types be selected, but it 
is also possible for you to define...

Handling Paper 3-13
Loading Paper
The following explains the procedure for loading paper in the cassette 
and the MP tray.
Loading Paper into the Cassette
1Fan the media (paper/transparencies), then tap it on a level surface 
to avoid media jams or skewed printing.
2Pull the paper cassette out toward you until it stops.
3Adjust the paper length guide to the length of the paper.
When loading A4 or smaller paper into paper cassette 1, raise the 
paper length guide. For B4 or larger paper, lower the paper...

3-14Handling Paper 
5Align the paper against the left side of the paper cassette.
IMPORTANT  Before loading the paper, be sure that it is not curled or 
folded. Paper that is curled or folded may cause paper jams.
Ensure that the loaded paper is not higher than the level indicator (see 
illustration below).
When loading the paper, make sure that the side that was closest to 
the package seal is facing up.
The paper length and width guides must be adjusted to the paper 
size. Loading the paper without...

Handling Paper 3-15
Loading Paper into the MP (Multi-Purpose) Tray
1Fan the media (paper/transparencies), then tap it on a level surface 
to avoid media jams or skewed printing.
2Open the MP tray.
3When loading paper sizes from A3 to B4 or Ledger to Legal, pull out 
the MP extension.
4Adjust the paper width guides to the width of the paper.
Paper sizes are indicated on the MP tray.
Downloaded From ManualsPrinter.com Manuals 

3-16Handling Paper 
5Insert the paper along the paper width guides into the tray until it 
stops.
IMPORTANT  Make sure that the side that was closest to the package 
seal is facing up.
Curled paper must be straightened before use.
Straighten the top edge if it is curled.
Before loading paper in the MP tray, make sure no paper remains in 
the tray from a previous job. If a small amount of paper remains in the 
MP tray and you want to add more, remove the remaining paper from 
the tray, combine it with the...

Using the Operation Panel 4-1
4 Using the Operation Panel
This chapter contains explanations on the following topics:
General Information 4-2
Understanding the Operation Panel 4-3
Keys 4-6
Using the Menu Selection System 4-8
Setting a Mode Selection Menu 4-10
Report Print 4-11
USB Memory (USB memory selection) 4-16
Custom Box 4-22
Job Box 4-28
Job Log 4-42
Counter (Viewing the counter value) 4-44
Paper Settings 4-46
Print Settings 4-55
Network (Network settings) 4-65
Device Common (Selecting/Setting the...

4-2Using the Operation Panel 
General Information
This chapter provides the information you need to configure the Ecosys 
Color printer. In general you need to use the operation panel only to make 
default settings. You can make most changes to the printer settings using 
the printer driver through the application software.
You can also access the printers various settings from a remote location, 
by using the control panel, the printer driver or other utilities such as the 
Status Monitor Utility. Other...

Using the Operation Panel 4-3
Understanding the Operation Panel
The operation panel on the top of the printer has a 4-line by 21-character 
liquid crystal display (LCD), ten keys, and three indicators (LED).
Messages that appear on the display and functions of indicators and keys 
are explained in this chapter.
Message Display
The message display on the operation panel shows:
• Status information, the ten messages listed below which are displayed 
during normal operation.
• For information on error code...

4-4Using the Operation Panel 
Status Information 
Error Codes
Refer to the Troubleshooting on page 6-1.
MessageMeaning
Please wait.The printer is warming up and is not ready. 
When the printer is switched on for the first time, this message will take several minutes.
Please wait.
Loading paper...Appears while paper is being loaded.
Please wait.
Adding toner...Toner is currently being replenished. This message may be displayed during continuous 
printing of a large volume of pages which require a large...