Kyocera FS C5250DN User Manual

4-63Using the Operation Panel
2Press 
U or V  to increase or decrease, respectively, the value at the 
blinking cursor. Enter the specified password. Use  Y and  Z to move 
the cursor right and left. Enter a password consisting of between 0 (no 
settings) and 16 numbers.
3Press  [OK]. The Security screen appears.
I/F Block (Interface (external device) block setting)
You can use this to lock and thereby protect the interface. The options 
available in Interface Block are as follows:
• USB Host (USB memory...

Using the Operation Panel
4-64
Optional Interface (Network interface card setting)
This locks and protects the network interface card (NIC). The default 
setting is  Unblock.
1Press Z while  >I/F Block  >  is displayed.  >>Option I/F  appears.
2Press [OK]. A blinking question mark ( ?) appears.
3Select  Block or Unblock  using U or  V.
4Press  [OK].
5Press [MENU] . The display returns to Ready .
NetWare (NetWare setting)
NetWare is a PC-based network operating system specifically for servers. 
NetWare is...

4-65Using the Operation Panel
1Press 
Z while >NetWare On >  is displayed. >>Frame Type  
appears.
2Press  [OK]. A blinking question mark ( ?) appears.
3Press  U or  V until the desired frame type appears and then press 
[OK] . The message display toggles through the following types:
•Auto
• 802.3
• Ethernet-II
•SNAP
• 802.2
4Press  [OK].
5Press [MENU] . The display returns to Ready .
AppleTalk (AppleTalk setting)
AppleTalk is a communications protocol used primarily on Macintosh 
computers and also...

Using the Operation Panel
4-66
The default setting is  Off.
1After entering the administrator ID and password, press  U or  V 
repeatedly until  >IPP appears.
2Press  [OK]. A blinking question mark ( ?) appears.
3Select  On or  Off using  U or  V.
4Press  [OK].
5Press [MENU] . The display returns to Ready .
SSL Server (SSL Server setting)
SSL (Secure Sockets Layer) refers to a protocol used to encrypt 
information sent and received over a network. SSL can currently be used 
to encrypt data such as the...

4-67Using the Operation Panel
The default setting is 
Off.
1Press Z while >SSL Server  On >  is displayed. >>DES appears.
2Press [OK]. A blinking question mark ( ?) appears.
3Select  On or  Off using  U or  V.
4Press  [OK].
5Press [MENU] . The display returns to Ready .
3DES (SSL Server 3DES setting)
3DES (Triple Data Encryption Standard) is a high level of encryption in 
which DES encryption is repeated threefold.
The default setting is On.
1Press  Z while >SSL Server  On >  is displayed. >>3DES...

Using the Operation Panel
4-68
2Press  [OK]. A blinking question mark ( ?) appears.
3Select  On or  Off using  U or  V.
4Press  [OK].
5Press [MENU] . The display returns to Ready .
HTTPS (SSL Server HTTPS setting)
HTTPS (HyperText Transfer Protocol Secure) is a protocol that adds SSL 
data encryption, message authentication and a digital signature function 
to the HTTP protocol used for data transfer between WWW servers and 
clients.
S-HTTP is a similar protocol, but HTTPS differs in that it uses SSL....

4-69Using the Operation Panel
Security Level (Security Level setting)
Security Level
 is primarily a menu used by service personnel for 
maintenance work. There is no need for customers to use this menu.
Thin Print (Thin Print setting)
Select whether or not to use ThinPrint.
1After entering the administrator ID and password, press  U or  V 
repeatedly until  >ThinPrint >  appears.
2Press [OK]. A blinking question mark ( ?) appears.
3Select  On or  Off using  U or  V.
4Press  [OK].
5Press [MENU] . The...

Using the Operation Panel
4-70
Job Accounting (Job Accounting selection/
setting)
Job Accounting is a function that allows the number of pages used to be 
managed by each department to be managed through the use of entered 
account IDs. 
Job accounting on this machine offers the following features:
• Support for up to 100 departments
• Department codes up to 8 digits long from 1 to 99999999
• Collective print management for the same department code
• Totaling of the number of pages used for each...

4-71Using the Operation Panel
Password (Administrator Password input)
To set up Job Accounting, you must enter an administrator ID and 
administrator password. For informat
ion on how to set the administrator 
password, refer to  Administrator (Administrator settings) on page 4-76 .
1Once you have entered the correct ID in the previous step (ID 
(Administrator ID input)), the message display shows  Password 
(Administrator password input) and a blinking cursor ( _).
2Press  U or V  to increase or...

Using the Operation Panel
4-72
Select Account (Department-specific settings)
This specifies the functions used for managing individual account IDs. 
The options available in Select Account are as follows:
• Counter (Account-specific counter management [color + Black &  White total])
• Color Counter (Account-specif ic counter management [color])
• Restriction (Print restriction selection [color + Black & White total])
• Color Restrict (Print re striction selection [color])
• Maximum Output (Maximum print...