Kyocera FS C5250DN User Manual

4-83Using the Operation Panel
Print Registration Chart (Printing the color registration 
correction chart)
You can use this option to print a color registration correction chart for use 
in correcting the color registration.
1Press 
Z while Adjust/Maintenance >  is displayed.
2Press U or  V repeatedly until  >Registration Details >  
appears.
3Press  Z.
4Press  U or  V repeatedly until  >>Print Registration Chart  
appears.
5Press  [OK]. A question mark ( ?) appears.>>Print 
 Registration Chart ?...

Using the Operation Panel
4-84
6Press  [OK]. Processing  appears and a color registration correction 
chart is printed out. There are horizontal (H) and vertical (V) 
registration charts for each color (magenta, cyan and yellow) included 
on the color registration correction chart.
7When printing ends, the display returns to  Ready.
M 12345 3 (Adjust magenta)
Makes detailed corrections to the registration for magenta (red).
1Press Z while Adjust/Maintenance >  is displayed.
2Press U or  V repeatedly...

4-85Using the Operation Panel
4Press 
U or  V repeatedly until  >>M 12345 3 appears.
5Press [OK]. 00000  or 0 will be displayed for each value and the 
cursor ( _) will flash under the H value.
6In the color registration correction chart printed in Print Registration 
Chart above, note the numbers of the sections in the magenta H and 
V charts where the lines most closely coincide as a single straight 
line. In the left example, the value would be B.
7Press  U or  V until that value is displayed.
8Use  Y...

Using the Operation Panel
4-86
Restart Printer
The procedure described below resets the printer’s temporary conditions, 
such as the current page orientation, font, etc., set by commands to their 
default values. Downloaded fonts and macros are deleted from the 
printer’s memory.
1Press  Z while Adjust/Maintenance >  is displayed.
2Press U or  V repeatedly until  >Restart Printer  appears.
3Press [OK]. A question mark ( ?) appears. 
4Press  [OK] again.  Self test  appears while the printer is resetting...

4-87Using the Operation Panel
Print Network Status Page (Printing the network status page)
The network status page contains detailed information on the network 
settings.  This is primarily used for maintenance by service personnel, but 
it contains information that may also be useful to you.
1Press 
Z while >Service >  is displayed.
2Press U or  V repeatedly until  >>Print Network Status Page  
appears.
3Press  [OK]. A question mark ( ?) appears.
4Press  [OK] again. Processing  appears and a network...

Using the Operation Panel
4-88
DEV-CLN (Developer/Refresh mode setting)
This sets the refresh mode for the developer. When the printing quality 
declines, refreshing the developer can restore the printing quality. This is 
primarily used for maintenance by service personnel.
1Press  Z while >Service >  is displayed.
2Press U or  V repeatedly until  >>DEV-CLN appears.
3Press [OK]. A question mark ( ?) appears.
4Press  [OK] again. Developer refreshing begins and  Please wait is 
displayed.
5When refreshing...

4-89Using the Operation Panel
3Press 
[OK]. A blinking question mark ( ?) appears.
4Press  U or  V to select  Normal, High 1  or High 2 .
5Press [OK]. 
6Press [MENU] . The display returns to Ready .
MC (Main charger output setting)
This sets the output of the main charger. When print quality has 
deteriorated, the output of the main charger can be changed to restore 
print quality.
1Press Z while >Service >  is displayed.
2Press U or  V repeatedly until  >>MC appears.
3Press  [OK]. A blinking question...

Using the Operation Panel
4-90
Downloaded From ManualsPrinter.com Manuals 

5-1
5 Maintenance
This chapter contains explanations on the following topics:
General Information5-2
Toner Container Replacement 5-2
Replacing the Waste Toner Box 5-6
Cleaning the Printer 5-8
Downloaded From ManualsPrinter.com Manuals 

Maintenance
5-2
General Information
This chapter describes basic maintenance tasks you can perform on the 
printer. You can replace the following component according to the 
printer ’s display:
• Toner Kits
• Waste Toner Box
Also, the following parts need periodic cleaning:
• Paper Transfer Unit
Toner Container Replacement
The toner container in the printer should be replaced as soon as the 
message display shows Toner low or soon after. If you continue to use 
the printer, eventually the toner supply...