Kyocera FS C5250DN User Manual

4-13Using the Operation Panel
Print Status Page
You can check the printers current status, including available memory 
space and option settings by printing a status page.
1Press 
Z while Report Print >  is displayed.
2Press U or  V repeatedly until  >Print Status Page  appears.
3Press [OK]. A question mark ( ?) appears.
4Press  [OK] again. The message  Processing appears and the 
printer prints a status page.
For a sample status page and its full description, refer to the next section 
Understanding the...

Using the Operation Panel
4-14
1 Firmware Version This item shows the version and release date of the printer 
firmware.
2 Printer Settings Information
This item shows various printer settings for hardware-related 
items:
- MP tray paper size and type
- Paper cassette size and type
- Sleep time
- Formfeed timeout time
3 Installed Options This item shows the options installed in the printer:
- Paper Feeder
- Hard disk
4 Network Status This item shows the IP address, subnet mask address, and 
default...

4-15Using the Operation Panel
Print Fonts List
To help you decide in selecting a font, you can printout lists of the internal 
fonts or the optional fonts.
1Press 
Z while Report Print >  is displayed.
2Press U or  V repeatedly until  >Print Fonts List  appears.
3Press [OK]. A question mark ( ?) appears.
4Press  [OK] again. The message  Processing appears and the 
printer prints a list of fonts with a sample and font ID (number) for 
each of them.
Print Hard Disk File List
This allows you to print a list...

Using the Operation Panel
4-16
USB Memory (USB memory selection)
This specifies the settings for removing the USB memory and printing 
USB memory content. The  USB Memory menu automatically appears 
when you install the USB memory.
IMPORTANT   This message is displayed only when the USB host 
block is set to  Unblock. For more information, please refer to  I/F 
Block (Interface (external device) block setting) on page 4-63
The options available in USB Memory are as follows:
• Print File (Printing a...

4-17Using the Operation Panel
Copies (Number of copies)
Sets the number of copies printed of the specified file in USB memory.
IMPORTANT  
To use this feature, an optional hard disk must be in-
stalled in the printer or the RAM disk must be set to  On.
1While Copies  in step 5 above is displayed, press  U and  V or Y  and 
Z  to display the number of copies. (E.g.:  10)
2Press  [OK]. Paper Source  and a question mark ( ?) appears.
Paper Source (Selecting the paper feed source)
Sets the paper used for...

Using the Operation Panel
4-18
Custom Box (Using a Custom Box)
IMPORTANT   To use a Custom Box, an optional hard disk must be 
installed in the printer. The hard disk must be formatted from the print-
er. For more information, refer to  Hard Disk (Using the optional hard 
disk) on page 4-56 .
A Custom Box is general-purpose box that allows users to store print data 
on the printers hard disk so that it can be reused as required.
Use the COMMAND CENTER to create and delete a Custom Box, but 
use the...

4-19Using the Operation Panel
IMPORTANT  
If you have set a password for the Custom Box, carry 
out the Box Password (Box password input)  step next.
Box Password (Box password input)
User access to a Custom Box can be restricted by specifying a password 
for the box. The password is specified from the COMMAND CENTER.
1If you have set a password for the Custom Box, press  Z while 
>Select Box >  is displayed. Box Password  is displayed and the 
blinking cursor ( _) appears.
2Press  U or V  to increase or...

Using the Operation Panel
4-20
MP tray
Cassette  (only the printers standard cassette used)
Cassette 1  to 4 (optional paper feeder installed)
Auto
4Press  [OK]. The screen for choosing whether to delete the data after 
printing appears with a blinking question mark ( ?).
5Select  Off or On  using  U or  V.
6Press  [OK]. Processing  is displayed and the specified number of 
copies of all the documents are printed. If you selected  On in the 
Delete after Printed  screen, all the documents are deleted...

4-21Using the Operation Panel
5Press 
[OK]. The screen for choosing whether to delete the data after 
printing appears with a blinking question mark ( ?).
6Select  Off or On  using  U or  V.
7Press  [OK]. Processing  is displayed and the specified number of 
copies of the selected document are printed. If you selected  On in the 
Delete after Printed  screen, the selected document is deleted 
after printing ends.
Delete All Files (Deletes all the data)
Use this procedure to delete all the documents in...

Using the Operation Panel
4-22
Job Box
IMPORTANT  To use the Job Box, an optional hard disk must be 
installed in the printer. The hard disk  must be formatted from the printer. 
For more information, refer to  Hard Disk (Using the optional hard disk) on 
page 4-56 . The RAM disk may also be used in the Proof-and-Hold and 
Private Print modes.
Job Box is a print function that makes the Job Retention function possible. 
The settings are specified from the printer driver. Refer to  Printer Driver 
User...