Kyocera FS C5250DN User Manual

1-1
1 Machine Parts
This chapter provides explanations and illustrations for you to 
determine the parts and their functions. Try to be familiar with 
the names and functions of these parts for correct use and 
optimal performance.
This chapter contains explanations on the following topics:
Components at the Front of the Printer 1-2
Internal Components 1-2
Components at the Rear of the Printer 1-3
Operation Panel 1-4
Downloaded From ManualsPrinter.com Manuals 

Machine Parts
1-2
Components at the Front of the Printer
1 Operation Panel
2 Top Cover (Top Tray)
3 Paper Stopper
4 MP (Multi-Purpose) Tray
5 Paper Cassette
6USB Memory Slot
7 Power Switch
Internal Components
8 Waste Toner Box Cover
9 Waste Toner Box
10 Black Toner Container (K)
11 Magenta Toner Container (M)
12 Cyan Toner Container (C)
13 Yellow Toner Container (Y)
3
4 5 12
7
6
8
9
10
11
12
13
Downloaded From ManualsPrinter.com Manuals 

1-3Machine Parts
14 Paper Transfer Unit
15 Paper Ramp
16 Duplex Unit
Components at the Rear of the Printer
17 Rear Cover
18 Rear Cover Lever
19 Network Indicators
20 Network Interface Connector
21 USB Interface Connector
22 USB Memory Slot (FS-C5250DN only)
23 Option Interface Slot
24 Power Cord Connector
25 Right Cover
26 Carrying Handles
16
15
14
12
17
18
20 1921
22
23
24
25
26
26
Downloaded From ManualsPrinter.com Manuals 

Machine Parts
1-4
Operation Panel
27 Message Display
28 Ready Indicator
29 Data Indicator
30 Attention Indicator
31 Arrow Keys
32 [MENU] Key
33 [Cancel] Key
34 [OK] Key
35 [GO] Key
27 28 31
2930
3233
34
35
Downloaded From ManualsPrinter.com Manuals 

2-1
2 Printing Operation
This chapter contains explanations on the following topics:
Changing Network Interface Parameters2-2
Printing a Status Page 2-3
COMMAND CENTER 2-3
Installing the Printer Driver 2-4
Printing from Application Software 2-10
Status Monitor 2-11
Uninstalling Software (Windows PC) 2-15
Downloaded From ManualsPrinter.com Manuals 

Printing Operation
2-2
Changing Network Interface Parameters
This printer supports TCP/IP, TCP/IP (IPv6), NetWare, AppleTalk, IPP, 
SSL Server and the IPSec protocols and Security Level. 
The table below shows the items required for each of the settings. 
Configure the printers network parameters as appropriate for your PC 
and your network environment. 
For details of the procedure, refer to the Using the Operation Panel on 
page 4-1.
Note  When COMMAND CENTER is used, network parameters 
and security...

2-3
Printing Operation
Printing a Status Page
After completing the network settings, print a status page. The status 
page allows you to confirm a range of information, including network 
addresses and network protocols. 
Refer to Report Print on page 4-11 for detailed information.
COMMAND CENTER
COMMAND CENTER is a tool that is accessed from a PC using a web 
browser to let you manage and configure settings for the print system. 
You can check the printer status and current settings, and change 
network...

Printing Operation
2-4
Installing the Printer Driver
Ensure the printer is plugged in and connected to the PC before installing 
the printer driver from the CD-ROM.The printer driver is necessary to print 
data created in an application.
Installing the Software in Windows
If you are connecting this printer to a Windows PC, follow the next steps 
to install the printer driver. The example shows you how to connect your 
printer to a Windows 7 PC.
You can use either Express Mode or Custom Mode to install...

2-5
Printing Operation
Express Mode
In Express Mode, the installer automatically detects the printer when it is 
turned on. Use Express Mode for standard connection methods.
1In the installation method selection window, select Express Mode. 
The print system detection window appears and the installer detects 
the connected printers. If the installer does not detect a print system, 
check that the print system is connected via USB or a network and 
that it is turned on. Return to the print system...

Printing Operation
2-6
This completes the printer driver installation procedure. Follow the 
on-screen instructions to restart the system, if required.
Custom Mode 
Use Custom Mode if you want to specify the printer port and select the 
software to be installed.
For example, if you do not want fonts installed on your computer to be 
overwritten, select Custom Mode and deselect the Fonts checkbox on 
the Utility tab of the Custom Install screen.
1Select Custom Mode.
2Following the instructions in the...