Kyocera FS 2020D User Manual

COMMAND CENTER Pages
Operation Guide 7
Basic Page
This section includes settings that apply to the machine, such as Device Defaults, 
Security, and basic Networking. If the Admin password has been set, pages in this 
section are available only to the Administrator.
Basic > Defaults > Network
This page allows you to make the settings  that are required for network printing and 
sending E-mail. For more information, refer to  Advanced > Protocols > TCP/IP > 
General  on page 35.
You must restart this...

COMMAND CENTER Pages
8KYOCERA COMMAND CENTER
Basic > Defaults > Time
If a time server is used to synchronize the time as well, the current time can be adjusted 
regularly and easily. Enter the IP addre ss of the time server and click the Synchronize 
button.
Time information is required when you receive reports from this machine via E-mail. It 
is recommended that you set the time when the report mail function is enabled. Prefix 
Length
Specifies the IPv6 prefix length of the hosts or network with 
which...

COMMAND CENTER Pages
Operation Guide 9
Basic > Defaults > Reset
This page allows you to restart the machine in order to make all settings in the machine 
valid. It is also possible to  select to have all settings returned to their factory default 
values.
Basic > Defaults > Device Defaults
This page allows you to change the language that  is used in the display, as well as to 
turn the Auto Sleep Mode  On or  Off.
Item
Description
Restart entire 
device Clicking Restart
 restarts this machine restarts....

COMMAND CENTER Pages
10KYOCERA COMMAND CENTER
Basic > Defaults > Address Book > Contacts
This page allows you to add, edit or delete Contacts.
Adding a New Contact
1.Open the Address Book Contacts  page.
2.Click Add Contact. The Address Book Contacts - Add  page opens.
3.Enter the information for the address to be  registered. You can specify a FAX number 
and i-FAX address even if the FAX System is not installed.
4.Click Submit .
Editing a Contact
1.Open the  Address Book Contacts  page.
Error Clear...

COMMAND CENTER Pages
Operation Guide 11
2.Click the number or name of the address to edit.
The Address Book Contacts - Edit  page appears .
3.Modify the information of the address.
4.Click Submit .
Deleting a Contact
1.Open the  Address Book Contacts  page.
2.Check the desired contact. When the check box on the left side of  Number is selected, 
all contacts displayed on  the page will be checked.
3.Click Delete Contact.
The  Address Book Contacts - Delete  page appears . You can confirm the addresses...

COMMAND CENTER Pages
12KYOCERA COMMAND CENTER
2.Check the desired group. When the check box on the left side of Number is selected, 
all groups displayed on the page will be checked.
3.Click Delete Group .
The  Address Book Groups - Delete page  appears. You can confirm the group to be 
deleted.
4.Click Delete  when the desired group is selected.
Basic > Security > Account Settings
The Administrator (Admin) account is the master  access account. It controls access to 
the printer and networking...

COMMAND CENTER Pages
Operation Guide 13
Basic > Security > Device Security > Interface Block
This page allows you to restrict  access from each interface. 
Basic > Security > Device Security > Network Security
This allows you to enable communication with the printing system on a per-protocol 
basis. 
Basic > Security > User Login
When the authentication function is set on the  Advanced > Management > 
Authentication  page (Local Authentication , depending on model), you must register 
users and set...

COMMAND CENTER Pages
14KYOCERA COMMAND CENTER
Editing a User Login
1.Open the User Login  page.
2.Click the desired Login User Name or Na me to edit the user and modify their 
information.
3.Click Submit .
Deleting a User Login
1.Open the  User Login  page.
2.Check the desired user. When the check box on the left side of  Login User Name is 
selected, all users displayed on the page will be checked.
3.Click Delete .
The  User Login - Delete  page appears. You can confirm the users to be deleted.
4.Click...

COMMAND CENTER Pages
Operation Guide 15
Device Certificate - CA Issued
Root Certificate
Application CertificateItem Description
CA Certificate
Displays whether the certificat
e issued by the Certification 
Authority (CA) is valid or not.
Expiration Displays the validity period of the certificate.
View Certificate Click View to view the details of the certificate.
Import 
Certificate Click 
Import  to open the  File Import window. Click  Browse 
to open the  file selection  dialog box. Select a file and...

COMMAND CENTER Pages
16KYOCERA COMMAND CENTER
Printer Page
This section includes settings that apply to the printing function of the machine, such as 
default print resolution or copy count. If the Admin password has been set, pages in this 
section are available only to the Administrator. 
Default printer settings will be overridden by  the printer driver settings. Settings that 
affect the machine entirely, such as lo cking the operation panel, are found under  Basic 
Page  on page 7.
Printer > Summary...