Kyocera FS 2020D User Manual

OPERATION GUIDE
F S -11 0 0
F S -13 0 0 D
870CKGB20008
*870CKGB20008*
COMMAND CENTER
Downloaded From ManualsPrinter.com Manuals 

Legal and General Information
NoticeUnauthorized reproduction of all or part of  this guide is prohibited. The information 
in this guide is subject to change without notice.
Kyocera Mita cannot be held liable for any  problems arising from the use of this 
product, regardless of the information herein.
Regarding Trademarks KYOCERA, KYOCERA MITA, ECOSYS  and PRESCRIBE are registered 
trademarks of Kyocera Corporation.
KPDL and KIR (Kyocera Image Refine ment) are trademarks of Kyocera 
Corporation....

1  Introduction .................................................................... .......... 1
Using COMMAND CENTER ...............................................................  1
System Requirements .........................................................................  1
2  Access ............................................................................ .......... 2
Accessing COMMAND CENTER ........................................................  2
Admin password...

Downloaded From ManualsPrinter.com Manuals 

Introduction
Operation Guide 1
1 Introduction
Using COMMAND CENTER
KYOCERA COMMAND CENTER (hereinafter referred to as COMMAND CENTER) 
refers to the web home page that is installe d in the machine from which you can verify 
the operating status of the machine and ma ke settings related to security, network 
printing, E-mail transmission and advanced networking.
System Requirements
Protocol
COMMAND CENTER operates in the following  environment. Check the following before 
use.
• The TCP/IP protocol is...

Access
2KYOCERA COMMAND CENTER
2 Access
Accessing COMMAND CENTER
1.Run the web browser. 
2.In Address or Location, enter the machine IP address as the URL, 
e.g. http://192.168.10.150/ .
Select a category from the navigation bar on  the left to view and set values for that 
category. 
Admin password
Setting  Administrator Password  restricts general users access to pages other than 
the  Start  page. For security purposes, setting the Administrator password is highly 
recommended. With some models, the...

COMMAND CENTER Pages
Operation Guide 3
3 COMMAND CENTER Pages
The COMMAND CENTER home page divides th e following functions onto separate 
pages. You can jump to the desired pages by clicking the tab located at the top of each 
page. The following is an outline of each page accessed.
Start Page
The following operations are possible from the  Start page.
• Verifying the machine’s operating status
• Logging in or out during setting of the administrator password
• Changing the language that CO MMAND CENTER...

COMMAND CENTER Pages
4KYOCERA COMMAND CENTER
Start > Start
This page allows you to verify the machine’s operating status . This will be the first screen 
that appears after COMMAND CENTER has been started up.
Start > Status Pages
These pages allow you to verify the various se ttings (machine, printing, scanning, network 
and E-mail) that were made on the operation panel or using COMMAND CENTER.
It is divided by the following items.
-Network
- Device/Printer
- Scanner
- Device/Printer
- FAX / i-FAX
-...

COMMAND CENTER Pages
Operation Guide 5
Item Description
Network > 
GeneralThis allows you to verify the current settings for LDAP, TCP/
IP, IPP, IPP over SSL, AppleTalk, NetBEUI, IPv4, and IPv6.
For more information, refer to 
Advanced Page on page 34.
Network > IP 
Filters This displays the list of IP addresses and subnet masks 
(IPv4) or prefix length (IPv6)
 that have access permission as 
set under IP Filters (IPv4)  and IP Filters (IPv6)  on the 
Advanced  page. If no IP addresses have been...

COMMAND CENTER Pages
6KYOCERA COMMAND CENTER
Start > Information
This page provides information about the Address Book, User Login, the model number 
of the machine and version of firmware.
Start > Links
Links to the Kyocera Mita Corporation web site. Visit the following web site for more 
information and downloads. FA X  / i -FA X  >  
General
This allows you to verify the settings made on the FAX / i-FAX 
page.
For more information, refer to  FAX / i-FAX Page on page 20.
FA X  / i -FA X  >  
FA X
FA X...