Kyocera FS 1028MFP User Manual

Basic Operation 
OPERATION GUIDE3-9
3
Copying
Follow the steps as below for basic copying.
1Press the Copy key when the  Copy key/indicator 
is off.
NOTE: If the Message Display is turned off, press the 
Power key and wait for the machine to warm up.
2Place the originals on the platen or in the optional 
document processor.
NOTE: For loading instructions, refer to  Loading 
Originals on page 2-44.
3The paper source for copying is the location 
displayed on the panel.
When you need to change the paper...

Basic Operation 
3-10OPERATION GUIDE
5Press the Start key to start copying.
6Remove the finished copies from the top tray.
Adjusting Density
Use this procedure to adjus t the density when copying.
NOTE: You may choose Auto mode as the default setting (refer to  Density on page 8-37).
The procedure for adjusting the dens ity of copies is explained below.
1Press the Function Menu  key. Function Menu 
appears.
2Press the  U or  V key to select [Density].
3Press the  OK key. Density appears.
4Press the  U or...

Basic Operation 
OPERATION GUIDE3-11
3
5Press the OK key. 
When [Manual] is selected, Manual appears. Press 
the  U or  V key to select your desired density and 
then press the  OK key. 
Completed.  is displayed and the screen returns to 
the basic screen.
6Press the  Start key. Copying begins.
Selecting Image Quality
Select image quality suited to the type of original.
The table below shows the quality options.
The procedure for selecting the quality of copies is explained below.
1Press the  Function...

Basic Operation 
3-12OPERATION GUIDE
Zoom Copying
Adjust the magnification to reduce or enlarge the original image. The following zoom options are available.
Auto Zoom
Automatically reduces or enlarges the original image 
suitably to the selected paper size.
Zoom Entry Manually reduces or enlarges the original image in 1% 
increments between 25% and 400%.
Standard Zoom
Reduces or enlarges at preset magnifications.
The following magnificat ions are available.
Letter-RLedger: 129 %
Statement-R: 64 % A3:...

Basic Operation 
OPERATION GUIDE3-13
3
The procedure for using zoom copying is explained below.
1Press the Function Menu  key. Function Menu 
appears.
2Press the  U or  V key to select [Zoom].
3Press the  OK key. Zoom appears.
4Press the  U or  V key to select the desired 
magnification.
To copy in the same size  as the original, select 
[100%].
To select automatic zoom, select [Auto].
To use fixed magnifications, select [Standard 
Zoom] and press the  OK key. Standard Zoom 
appears. Press the  U or  V...

Basic Operation 
3-14OPERATION GUIDE
5Press the OK key.  Completed . is displayed and the 
screen returns to  the basic screen.
6Press the Start key. Copying begins.
Duplex Copying
Produce two-sided copies. The following duplex options are available.
You can also create single-sided copies from two-sided originals or originals with facing pages such as books. 
The following modes are available.
One-sided to Two-sided
Produces two-sided copies from one-sided originals. In 
case of an odd number of...

Basic Operation 
OPERATION GUIDE3-15
3
Two-sided to Two-sided
Produces two-sided copies from two-sided originals. 
The optional document processor is required.
NOTE: The paper sizes supported in Two-sided to 
Two-sided are Legal, Letter, Oficio II, Executive, A4, 
B5, A5 and Folio.
The procedure for using two-sided/duplex copying is explained below.
1Press the  Function Menu  key. Function Menu 
appears.
2Press the  U or  V key to select [Duplex].
3Press the  OK key. Duplex appears.
4Press the  U or  V...

Basic Operation 
3-16OPERATION GUIDE
If you select [2-sided>>1-sided], press [Detail] (the 
Right Select
 key) and you can select the binding 
edge of the original and the original setting 
orientation.
After pressing the  OK key, select the binding edge 
of the original and finished copies, and the original 
setting orientation.
If you select [2-sided>>2-sided], press [Detail] (the 
Right Select  key) and you can select the binding 
edge of the original and the original setting 
orientation.
After...

Basic Operation 
OPERATION GUIDE3-17
3
If there is no next original, press [End Scan] (the 
Right Select key). Copying begins.
Collate Copying
The machine can collate at the same time as it copies.
You can use the Collate copy function for tasks such as those shown below.
Scan multiple originals and deliver complete sets of 
copies as required according to page number.
The procedure for using collate copying is explained 
below.
1Press the  Function Menu  key. Function Menu 
appears.
2Press the  U or  V...

Basic Operation 
3-18OPERATION GUIDE
Printing - Printing from Applications
Follow the steps below to print documents from applications.
NOTE: To print the document from applicat ions, install the printer driver on your computer from the supplied 
CD-ROM (Product Library).
1Create a document using an application.
2Click File and select  Print in the application. The 
Print  dialog box appears.
3Click the  T button next to the Name field and select 
this machine from the list.
4Enter the desired print...