Kyocera FS 1028MFP User Manual

Sending Functions 
OPERATION GUIDE5-5
5
4Press the U or  V key to select [Sending Size].
5Press the  OK key. Sending Size appears.
6Press the U  or V key to select the desired sending 
size.
If you select [Others], se lect one of the other 
options.
7Press the  OK key.
Completed.  is displayed and the screen returns to 
the basic screen for sending.
8Specify the destination, and press the  Start key to 
start sending.
Sending Size:a  b 
*********************
2  Letter
3  Legal
1 *Same as OrigSize...

Sending Functions 
5-6OPERATION GUIDE
Zoom
Scans the original by automatically zooming it depending on the sending size.
The table below lists the available options.
NOTE: When zooming in or out, see  Sending Size on page 5-4 when selecting the sending size.
When Custom Size or  Size Entry is selected as the original size, the  originals are sent at normal size and 
zooming cannot be used.
Depending on the combination of original size and sending size, the image is placed at the edge of the paper. 
Use...

Sending Functions 
OPERATION GUIDE5-7
5
Duplex Sending
Select the type and binding of original depending on the original.
The table below lists the binding directions for each original type.
Use the procedure below to select the original type and binding direction when sending scanned originals.
1Press the Send key.
2Place the originals on the platen.
3Press the Function Menu  key. Function Menu 
appears.
4Press the  U or  V key to select [Duplex].
5Press the  OK key. Duplex appears.
6Press the  U or  V...

Sending Functions 
5-8OPERATION GUIDE
Original Orientation
To send the document in the orientation that can be read properly, specify the upper orientation of original. To 
use the functions below, select the orientation in which the original is set on the platen.
• 1-sided / 2-sided Selection
When placing the original on the platen
When placing the original on the optional document processor
Use the procedure below to select  the orientation when placing the orig inals on the platen for sending.
1Press...

Sending Functions 
OPERATION GUIDE5-9
5
5Press the OK key. Orig.Orientation appears.
6Press the  U or  V key to select [Top Edge Top] or 
[Top Edge Left].
7Press the  OK key.
Completed.  is displayed and the screen returns to 
the basic screen for sending.
8Specify the destination, and press the  Start key to 
start sending.
Orig.Orientation:a  b 
1  c Top Edge Top
*********************2 *d Top Edge Left
Downloaded From ManualsPrinter.com Manuals 

Sending Functions 
5-10OPERATION GUIDE
File Format
Select the file format of the image to send.
The table below lists the file  formats and their details.
NOTE: You cannot select [JPEG] if [Black and  White] is selected for the color mode.
Use the procedure below to select the file format for transmission.
1Press the  Send key.
2Place the originals on the platen.
3Press the Function Menu  key. Function Menu 
appears.
4Press the  U or  V key to select  [File Format].
5Press the OK key. File Format...

Sending Functions 
OPERATION GUIDE5-11
5
7Press the OK key.
Completed.  is displayed and the screen returns to 
the basic screen for sending.
8Specify the destination, and press the  Start key to 
start sending.
Downloaded From ManualsPrinter.com Manuals 

Sending Functions 
5-12OPERATION GUIDE
Original Image
Select image quality suitable to the type of original.
The table below shows the quality options.
Use the procedure below to select the quality when sending scanned originals.
1Press the  Send key.
2Place the originals on the platen.
3Press the Function Menu  key. Function Menu 
appears.
4Press the  U or  V key to select [Original Image].
5Press the  OK key. Original Image appears.
6Press the  U or  V key to select the desired image 
quality.
7Press...

Sending Functions 
OPERATION GUIDE5-13
5
Adjusting Density
Use the procedure below to adjust the density when scanning the originals.
The table below shows the available settings.
The procedure for adjusting the density is explained below.
1Press the Send key.
2Place the originals on the platen.
3Press the Function Menu  key. Function Menu 
appears.
4Press the  U or  V key to select [Density].
5Press the  OK key. Density appears.
6Press the  U or  V key to select [Auto] or [Manual].
If you select...

Sending Functions 
5-14OPERATION GUIDE
Scan Resolution
Select the fineness of scanning resolution. The finer the scanning becomes (the larger the number becomes), 
the better the image quality becomes. However, better resolu tion also results in larger file size (file capacity) and 
longer scanning and sending times. The selectable  resolution is 200x100dpi Normal, 200x200dpi Fine, 
200x400dpi Super Fine, 300x300dpi, 400x400dpi Ultra Fine, or 600x600dpi.
The procedure for adjusting the scanning...