Kyocera FS 1028MFP User Manual

Copying Functions 
OPERATION GUIDE4-5
4
Selecting the Multi Purpose Tray
Change the paper size and media type.
The available paper sizes and media types are shown in the table below.
NOTE: You can conveniently select in advance the size and type of pape r that will be used often and set them 
as default (refer to Paper Size and Media Type Setup for Multi Purpose Tray on page 8-15 ).
Use the procedure below to select the paper size and media type.
1Press the  Copy key.
2Place the originals on the platen....

Copying Functions 
4-6OPERATION GUIDE
3Press the Function Menu  key. Function Menu 
appears.
4Press the  U or  V key to select [Paper Selection].
5Press the  OK key. Paper Selection appears.
6Press the  U or  V key to select [MP Tray Set.].
7Press the  OK key. MP Tray Set. appears.
8Press the  U or  V key to select [Standard Size], 
[Others] or [Size Entry] and press the  OK key, 
select the desired paper size, and then press the 
OK  key.
If you select [Size Entry], using the numeric keys to 
enter the...

Copying Functions 
OPERATION GUIDE4-7
4
If Add paper in MP tray. is displayed during the 
copying process, add paper in the multi purpose 
tray, and then press the OK key. Copying then 
resumes.
Downloaded From ManualsPrinter.com Manuals 

Copying Functions 
4-8OPERATION GUIDE
Original Orientation
Select the original orientation to use the following functions.
•Duplex
• Combine mode
When placing originals on the platen
When placing originals on the optional document processor
NOTE: To change the default setting for the original orientation, refer to Orig.Orientation on page 8-30.
[Top Edge Top][Top Edge Left]
[Top Edge Top][Top Edge Left]
Downloaded From ManualsPrinter.com Manuals 

Copying Functions 
OPERATION GUIDE4-9
4
Use the procedure below to select the orientation when placing the originals on the platen.
1Press the Copy key.
2Place the originals on the platen.
3Press the  Function Menu  key. Function Menu 
appears.
4Press the  U or  V key to select [Orig.Orientation].
5Press the  OK key. Orig.Orientation appears.
6Press the  U or  V key to select [Top Edge Top] or 
[Top Edge Left].
7Press the  OK key.
Completed.  is displayed and the screen returns to 
the basic screen for...

Copying Functions 
4-10OPERATION GUIDE
EcoPrint
Use EcoPrint to save toner when printing. Use this function for test copies or any other occasion where high 
quality print is unnecessary.
The procedure for making copies us ing EcoPrint is explained below.
1Press the Copy key.
2Place the originals on the platen.
3Press the  Function Menu  key. Function Menu 
appears.
4Press the  U or  V key to select [EcoPrint].
5Press the  OK key. EcoPrint appears.
6Press the  U or V  key to select [On] and then press...

Copying Functions 
OPERATION GUIDE4-11
4
Combine Mode
This mode allows you to copy 2 or 4 originals combined onto a single page. 2-in-1 mode or 4-in-1 mode. The 
page boundary of each original can be indicated.
NOTE: Combine mode is available for the copy paper sizes of Folio, A4, B5, Legal, Oficio II, Letter, Statement 
and 16K.
2-in-1 Mode
For copying two originals onto a single sheet. This mode can be used with Duplex mode to copy four originals 
onto one sheet.
The following 2-in-1 options and output...

Copying Functions 
4-12OPERATION GUIDE
4-in-1 Mode
For copying four originals onto a single sheet. This mode can be used with Duplex mode to copy eight originals 
onto one sheet.
The following 4-in-1 options and output orientations are available.
NOTE: When placing the original on the platen, be sure to copy the originals in page order.
Original
Document processor
Platen Orientation of Original
Copy
Downloaded From ManualsPrinter.com Manuals 

Copying Functions 
OPERATION GUIDE4-13
4
Types of Page Boundary Lines
The following types of the boundary lines are available.
The procedure for using Combine mode copying is explained below.
1Press the Copy key.
2Place the originals on the platen.
3Press the  Function Menu  key. Function Menu 
appears.
4Press the  U or  V key to select [Combine].
5Press the  OK key. Combine appears.
6Press the  U or  V key to select [2 in1] or [4 in 1].
7Press [Detail] (the  Right Select key).
8Press the U or  V key to...

Copying Functions 
4-14OPERATION GUIDE
9Press the U or V  key to select the desired border 
line type and then press the  OK key.
10Press the  U or  V key to select the orientation of 
the original and then press the  OK key.
Completed.  is displayed and the screen returns to 
the basic screen for copying.
11Press the  Start key. Scanning begins.
If the original is placed on the platen, replace the 
original and press the  Start key.
After scanning all originals, press [End Scan] (the 
Right Select  key)...