Konica T37 Internet Fax Users Manual
Have a look at the manual Konica T37 Internet Fax Users Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 61 Konica manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 58
|Konica FA X 9930 56
E-mail-to-Fax Troubleshooting
I have sent data using the format “FAX=[telephone
number]@[domain name], but it has not been delivered to
the Internet Fax.
You may have set the domain name (the part after @)
incorrectly. Consult your Network Administrator about the
correct domain entry.
The Internet Fax refuses to receive data.
Check the entered telephone number.
Characters that can be used are: numbers, +, #, *, P or –
If you have entered a telephone number longer than 40
digits,...](http://img.usermanuals.tech/thumb/2790/63123/w64_konica-t37-internet-fax-manual_d-57.png "Page 58
|Konica FA X 9930 56
E-mail-to-Fax Troubleshooting
I have sent data using the format “FAX=[telephone
number]@[domain name], but it has not been delivered to
the Internet Fax.
You may have set the domain name (the part after @)
incorrectly. Consult your Network Administrator about the
correct domain entry.
The Internet Fax refuses to receive data.
Check the entered telephone number.
Characters that can be used are: numbers, +, #, *, P or –
If you have entered a telephone number longer than 40
digits,...")
|T.37Internet FAX User’s Guide59 Printing Troubleshooting I want to use my fax machine as a printer. When I try to install the printer driver on my Windows 2000 system, I get a warning message about authentication. Ignore this message if it appears. It will not cause any problems with the installation of the driver. I have the optional second paper tray installed. Why won’t my machine automatically pull paper from the other tray when one runs out? Verify tha t User Function 80, Auto Tray Switch is ON. Verify that the same size paper is installed in both trays. Verify that the second tray is properly installed. When printing over the network, my fax machine sometimes won’t print the last page. It is possible to judge whether printig data is not being transmitted due to network delay or the end of the data stream. You can try to adjust the setting of User Function 82: LAN Print T.O. to a longer interval This time-out configuration allows the device to cancel a print job when no printing data can be found after a specified time has elapsed since the last data was submitted.