Konica Minolta PagePro 5650EN User Manual

Replacing Consumables 121
4Pull down the 2 levers at the bot-
tom of the fuser unit.
5Remove the fuser unit slowly.
Downloaded From ManualsPrinter.com Manuals 

Replacing Consumables 122
6Prepare a new fuser unit.
Be careful not to touch 
the surface of the fuser 
roller.
7Insert the new fuser unit slowly.
Downloaded From ManualsPrinter.com Manuals 

Replacing Consumables 123
8Lift up the 2 levers at the bottom 
of the fuser unit.
9Push down the levers at both 
ends of the fuser unit to lock it.
10Close the rear cover.
Do not close the rear cover without installing the fuser unit. Forc-
ibly closing the rear cover may damage the lever or the cover. 
11Reconnect the power cord, and 
turn on the printer.
Downloaded From ManualsPrinter.com Manuals 

Replacing Consumables 124
12Reset the counter in the MAINTENANCE MENU/SUPPLIES/
REPLACE/FUSER UNIT
 menu.
Downloaded From ManualsPrinter.com Manuals 

Replacing Consumables 125 Replacing the Transfer Roller
1Open the top cover.
Do not touch any parts 
inside the printer.
2Hold the toner cartridge by the 
grip to pull it out slowly.for pagepro 4650EN for pagepro 5650EN
Downloaded From ManualsPrinter.com Manuals 

Replacing Consumables 126
3Pull the 2 levers on the upper 
part of the transfer roller, then 
squeeze the 2 levers on the bot-
tom of the transfer roller and pull 
it out slowly towards you.
4Pick up the new transfer roller by 
the levers at both ends, and then 
slot it in slowly.
5Hold the toner cartridge by the 
grip, and then insert it into the 
slot inside the printer.
Do not touch any parts 
inside the printer.
Ensure that the toner car-
tridge is firmly set.
Downloaded From ManualsPrinter.com...

Replacing Consumables 127
6Close the top cover securely.
Replacing the Feed Roller
The feed roller is included as one of the regular replacement parts. There are 
two feed rollers inside the machine and one in the tray. All feed rollers are 
recommended to be replaced periodically.
Downloaded From ManualsPrinter.com Manuals 

Replacing Consumables 128
Replacing the Feed Roller (in the Tray)
1Pull the tray out of the printer.
2Remove the lid of the tray.
3Remove any paper in the tray.
Downloaded From ManualsPrinter.com Manuals 

Replacing Consumables 129
4While pushing down the shaft of 
the feed roller, widen the tab of 
the feed roller to loosen it (1) 
and then slowly remove the feed 
roller from the shaft on the tray 
(2).
5Hold the tab on the new feed 
roller and slowly push it into the 
shaft on the tray.
6Aligning the small tabs on the 
feed roller with the slots of the 
shaft, push the feed roller com-
pletely in so that the tab fits into 
the slot.
Downloaded From ManualsPrinter.com Manuals 

Replacing Consumables 130
7Load the paper face up in the 
tray.
Do not load the paper above 
the 
↑ mark. For the informa-
tion on the tray capacity for 
each media, see “Media 
Types” on page 85. 
8Reattach the lid of the tray.
9Push the tray completely into the 
printer. 
Downloaded From ManualsPrinter.com Manuals