Konica Minolta PagePro 5650EN User Manual
Have a look at the manual Konica Minolta PagePro 5650EN User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 61 Konica manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Replacing Consumables 121 4Pull down the 2 levers at the bot- tom of the fuser unit. 5Remove the fuser unit slowly. Downloaded From ManualsPrinter.com Manuals
Replacing Consumables 122 6Prepare a new fuser unit. Be careful not to touch the surface of the fuser roller. 7Insert the new fuser unit slowly. Downloaded From ManualsPrinter.com Manuals
Replacing Consumables 123 8Lift up the 2 levers at the bottom of the fuser unit. 9Push down the levers at both ends of the fuser unit to lock it. 10Close the rear cover. Do not close the rear cover without installing the fuser unit. Forc- ibly closing the rear cover may damage the lever or the cover. 11Reconnect the power cord, and turn on the printer. Downloaded From ManualsPrinter.com Manuals
Replacing Consumables 124 12Reset the counter in the MAINTENANCE MENU/SUPPLIES/ REPLACE/FUSER UNIT menu. Downloaded From ManualsPrinter.com Manuals
Replacing Consumables 125 Replacing the Transfer Roller 1Open the top cover. Do not touch any parts inside the printer. 2Hold the toner cartridge by the grip to pull it out slowly.for pagepro 4650EN for pagepro 5650EN Downloaded From ManualsPrinter.com Manuals
Replacing Consumables 126 3Pull the 2 levers on the upper part of the transfer roller, then squeeze the 2 levers on the bot- tom of the transfer roller and pull it out slowly towards you. 4Pick up the new transfer roller by the levers at both ends, and then slot it in slowly. 5Hold the toner cartridge by the grip, and then insert it into the slot inside the printer. Do not touch any parts inside the printer. Ensure that the toner car- tridge is firmly set. Downloaded From ManualsPrinter.com Manuals
Replacing Consumables 127 6Close the top cover securely. Replacing the Feed Roller The feed roller is included as one of the regular replacement parts. There are two feed rollers inside the machine and one in the tray. All feed rollers are recommended to be replaced periodically. Downloaded From ManualsPrinter.com Manuals
Replacing Consumables 128 Replacing the Feed Roller (in the Tray) 1Pull the tray out of the printer. 2Remove the lid of the tray. 3Remove any paper in the tray. Downloaded From ManualsPrinter.com Manuals
Replacing Consumables 129 4While pushing down the shaft of the feed roller, widen the tab of the feed roller to loosen it (1) and then slowly remove the feed roller from the shaft on the tray (2). 5Hold the tab on the new feed roller and slowly push it into the shaft on the tray. 6Aligning the small tabs on the feed roller with the slots of the shaft, push the feed roller com- pletely in so that the tab fits into the slot. Downloaded From ManualsPrinter.com Manuals
Replacing Consumables 130 7Load the paper face up in the tray. Do not load the paper above the ↑ mark. For the informa- tion on the tray capacity for each media, see “Media Types” on page 85. 8Reattach the lid of the tray. 9Push the tray completely into the printer. Downloaded From ManualsPrinter.com Manuals