Konica Minolta PagePro 5650EN User Manual

							Configuration Menu Overview 61
IPv6 ENABLESettingsYES/NO
If YES is selected, IPv6 is 
enabled.
If 
NO is selected, IPv6 is dis-
abled.
AUTO 
SET-
TINGSettingsYES/NO
If YES is selected, IPv6 
address is automatically 
obtained.
If 
NO is selected, IPv6 auto 
configuration is disabled.
LINK 
LOCALDisplays the link-local address 
of IPv6.
GLOBAL 
ADDRESSDisplays the global address of 
IPv6.
GATE-
WAY 
ADDRESSDisplays the gateway address 
of IPv6.
NETWARE ENABLESettingsYES/NO
If YES is selected, NetWare is enabled.
If 
NO is selected, NetWare is disabled.
APPLE
TALKENABLE SettingsYES/NO
If YES is selected, AppleTalk is enabled.
If 
NO is selected, AppleTalk is disabled.
SPEED/
DUPLEXSettingsAUTO/10BASE FULL/10BASE 
HALF/100BASE FULL/100BASE 
HALF/1000BASE FULL
Specify the transmission speed for the network and 
the transmission method for bi-directional 
transmission.
IEEE802.
1XENABLESettingsYES/NO
If YES is selected, IEEE802.1X is 
enabled.
If 
NO is selected, IEEE802.1X is 
disabled.
Downloaded From ManualsPrinter.com Manuals 
						

							Configuration Menu Overview 62
MEMORY 
DIRECTSettingsENABLE/DISABLE
Select whether to enable or disable memory direct printing.
If 
ENABLE is selected, memory direct printing is enabled.
If 
DISABLE is selected, memory direct printing is disabled.
Downloaded From ManualsPrinter.com Manuals 
						

							Configuration Menu Overview 63 SYS DEFAULT MENU
With this menu, settings can be specified to adjust the operation of the printer, 
such as the display language of the message window and the time until the 
machine enters Energy Saver mode.
LANGUAGE
EMULATIONDEF.
EMULATION
POSTSCRIPTWAIT 
TIMEOUT
PS ERROR 
PAGE
PS PROTOCOL
PCLCR/LF 
MAPPING
LINES PER 
PAGE
FONT SOURCEFONT NUMBER
PITCH SIZE
(POINT SIZE)
SYMBOL SET
PAPERDEFAULT 
PAPER
UNIT OF 
MEASURE
SYS DEFAULT MENU
PAPER SIZE
CUSTOM SIZE
PAPER TYPE
DO STARTUP 
PAGESTARTUP 
OPTIONS
AUTO 
CONTINUE
XPS****DIGITAL SIG-
NATURE
XPS ERROR 
PAGE
PAPER SIZE 
ERROR
Downloaded From ManualsPrinter.com Manuals 
						

							Configuration Menu Overview 64
LCD 
CONTRAST
SECURITYCHANGE 
PASSWORD
LOCK PANEL
CLOCKDATE 
(xx.xx.xx)
TIME
HDD FORMAT*USER AREA 
ONLY
ALL
RESTORE 
DEFAULTSRESTORE 
NETWORK
RESTORE 
PRINTER
RESTORE ALL
ENERGY 
SAVER TIME
MENU 
TIMEOUT
TIME ZONE
HOLD JOB 
TIMEOUT*
CARD FORMAT**USER AREA 
ONLY
ALL
Downloaded From ManualsPrinter.com Manuals 
						

							Configuration Menu Overview 65
* This menu item appears only if an optional hard disk kit is installed.
** This menu item appears only if an optional CompactFlash card is 
installed.
*** These menu items appear only if the optional lower feeder unit is 
installed.
**** This menu item appears only if an optional hard disk kit or a Com-
pactFlash card is installed.
ENABLE 
WARNINGPAPER EMPTYTRAY1
TRAY2
TRAY3***
TRAY4***
PAPER LOW
TONER LOW
TRAY2
TRAY3***
TRAY4***
Downloaded From ManualsPrinter.com Manuals 
						

							Configuration Menu Overview 66
All factory default values are shown in bold.
LAN-
GUAGESettingsENGLISH/FRENCH/GERMAN/SPANISH/
ITALIAN/PORTUGUESE/CZECH/JAPANESE/
KOREAN/SIMPLIFIED CHINESE/
TRADITIONAL CHINESE/DUTCH/RUSSIAN/ 
POLISH
The display language of the message window can be changed 
to the selected language.
The language selections appear in the message window in the 
corresponding language. For example, 
GERMAN appears as 
DEUTSCH.
EMULA-
TIONDEF. 
EMULA-
TIONSettingsAUTO/POSTSCRIPT/PCL
Specify the printer emulation language.
If 
AUTO is selected, the printer automatically selects 
the printer emulation language from the data stream.
POST-
SCRIPTWAIT 
TIME
OUTSettings0-300
Specify the time until an error is 
determined to be a PostScript error.
If 
0 is selected, no timeout is performed.
PS 
ERROR 
PAGESettingsON/OFF
Select whether or not an error page is 
printed when a Postscript error occurs.
PS 
PROTO-
COLSettingsAUTO/NORMAL/BINARY
Specify the protocol for data transmissions 
with a PostScript data stream.
If 
AUTO is selected, the printer 
automatically selects an applicable 
protocol from the data stream.
Downloaded From ManualsPrinter.com Manuals 
						

							Configuration Menu Overview 67
PCL CR/LF 
MAP-
PINGSettingsCR=CR LF=LF/CR=CRLF 
LF=LF/CR=CR 
LF=LFCR/CR=CRLF 
LF=LFCR
Select the definitions of the CR/LF codes 
in the PCL language.
LINES 
PER 
PAGESettings5-60-128
Specify the number of lines per page in the 
PCL language.
FONT 
SOURCEFONT 
NUMBERSettings0-102
Specify the default font in the 
PCL language.
The font numbers that appear 
correspond to the PCL font list. 
For details on printing the font 
list, refer to “PRINT MENU” on 
page 34.
PITCH 
SIZE
(POINT 
SIZE)Settings0.44-10.00-
99.99
(4.00-12.00-
999.75)
Specify the font size in the PCL 
language.
If the selected 
FONT NUMBER 
is for a bitmap font, 
PITCH 
SIZE
 appears. If the selected 
FONT NUMBER is for an 
outline font, 
POINT SIZE 
appears.
SYMBOL 
SETSpecify the symbol set used 
with the PCL language.
The default setting is 
PC8.
Downloaded From ManualsPrinter.com Manuals 
						

							Configuration Menu Overview 68
XPS DIGI-
TAL 
SIGNA-
TURESettingsENABLE/DISABLE
If ENABLE is selected, DIGITAL SIG-
NATURE
 is enabled.
If 
DISABLE is selected, DIGITAL 
SIGNATURE
 is disabled.
XPS 
ERROR 
PAGESettingsON/OFF
If ON is selected, an XPS error page is 
printed when an XPS error occurs.
If 
OFF is selected, no XPS error page is 
printed when an XPS error occurs.
PAPER DEFAULT 
PAPERPAPER 
SIZESettingsLETTER/LEGAL/EXECU-
TIVE/A4/A5/A6/
B5(JIS)/B6(JIS)/GOVT 
LETTER/STATEMENT/
FOLIO/SP FOLIO/UK 
QUARTO/FOOLSCAP/GOVT 
LEGAL/16K/KAI 16/KAI 
32/ENV C5/ENV C6/ENV 
DL/ENV MONARCH/ENV 
CHOU#3/ENV CHOU#4/
B5(ISO)/ENV #10/ENV 
YOU#4/JPOST/JPOST-D/
CUSTOM
Select the size of media that is normally 
used.
The default setting for North 
America is 
LETTER. The default 
setting for all other regions is 
A4.
Downloaded From ManualsPrinter.com Manuals 
						

							Configuration Menu Overview 69
CUSTOM 
SIZESpecify the media size when PAPER 
SIZE
 is set to CUSTOM.
The setting units can be switched between 
millimeters and inches with the 
SYS 
DEFAULT MENU/PAPER/UNIT OF 
MEASURE
 setting.
Setting range for 
WIDTH
„For MILLIMETERS: 76 to 216 mm
(default)
–North America: 216 mm
–All other regions: 210 mm
„For INCHES: 3.00 to 8.50 inches
(default)
–North America: 8.50 inches
–All other regions: 8.27 inches
Setting range for LENGTH
„For MILLIMETERS: 127 to 356 mm
(default)
–North America: 279 mm
–All other regions: 297 mm
„For INCHES: 5.00 to 
14.00 inches
(default)
–North America: 11.00 inches
–All other regions: 11.69 inches
Downloaded From ManualsPrinter.com Manuals 
						

							Configuration Menu Overview 70
PAPER 
TYPESettingsPLAIN PAPER/
RECYCLED/THICK 1/
THICK 2/THICK 3/
LABEL/TRANSPARENCY/
ENVELOPE/POSTCARD/
THIN PAPER
Select the type of media that is normally 
used.
THICK 3 and THIN PAPER are 
selectable for pagepro 5650EN only.
PAPER 
SIZE 
ERRORSettingsENABLE/DISABLE
If ENABLE is selected, a paper size error is detected.
If 
DISABLE is selected, no paper size error is 
detected.
UNIT 
OF 
MEA-
SURESettingsINCHES/MILLIMETERS
The units for specifying the size of custom media can 
be switched between inches and millimeters.
The default setting for North America is 
INCHES. The default setting for all other 
regions is 
MILLIMETERS.
STARTUP 
OPTIONSDO 
START-
UP 
PAGESettingsON/OFF
Select whether or not a startup page is printed when 
the printer is turned on.
AUTO 
CON-
TINUESettingsON/OFF
Select whether or not printing continues if the size or type of 
media in the selected tray is different from the size or type of 
media for the print job.
If 
AUTO CONTINUE is set to ON, printing automatically contin-
ues after about 10 seconds under the following conditions. At 
this time, printing will be performed even if the media size is dif-
ferent.
No media: PAPER EMPTY (Page 186)/TRAY EMPTY (Page 
187)
Different media size/type: PAPER ERROR (Page 186)/TRAY x 
PAPER ERR (Page 187)
Downloaded From ManualsPrinter.com Manuals