Konica Minolta PagePro 5650EN User Manual
Here you can view all the pages of manual Konica Minolta PagePro 5650EN User Manual. The Konica manuals for Printer are available online for free. You can easily download all the documents as PDF.
Page 101
Media Types 91 Transparencies Do not fan transparencies before loading them. Resulting static elec- tricity may cause printing errors. If you touch the face of the transparencies with your bare hands, print quality may be affected. Keep the printer path clean. Transparencies are especially sensitive to a dirty media path. If there are shadows on either the top or the bottom of the sheets, see chapter 8, “Maintaining the Printer” . Remove transparencies as soon as possible from the output tray to...
Page 102
Media Types 92 What Is the Guaranteed Imageable (Printable) Area? The printable area on all media sizes is up to 4.2 mm (0.165) from the edges of the media. Each media size has a specific image- able area, the maximum area on which the printer can print clearly and without distortion. This area is subject to both hardware limits (the physical media size and the margins required by the printer) and software constraints (the amount of memory available for the full-page frame buffer). The...
Page 103
Loading Media 93 Loading Media How do I load media? Take off the top and bottom sheets of a ream of paper. Holding a stack of approx- imately 100 sheets at a time, fan the stack to prevent static buildup before inserting it in a tray. Do not fan transparencies. Note Although this printer was designed for printing on a wide range of media types, it is not intended to print exclusively on a single media type except plain paper. Continuous printing on media other than plain paper (such as envelopes,...
Page 104
Loading Media 94 2Remove the lid of the tray. 3If the media pressure plate is raised, press down the media pressure plate to lock it into place. 4Squeeze the media guide (length) and slide it to the desired size. 5Squeeze the media guide (width) and slide it to the desired size. Downloaded From ManualsPrinter.com Manuals
Page 105
Loading Media 95 6Load the paper face up in the tray. Do not load the paper above the ↑ mark. For the informa- tion on the tray capacity for each media, see “Media Types” on page 85. 7Reattach the lid of the tray. 8Push the tray completely into the printer. 9Select PAPER MENU/PAPER SOURCE/TRAY X (Tray 1/2/3/ 4)/PAPER SIZE and PAPER TYPE in the configuration menu, and then select the setting for the size and type of media that is loaded. See also “PAPER MENU” on page 36. Other Media When...
Page 106
Loading Media 96 Loading Envelopes The following procedure is given taking Envelop #10 as an example. Load the envelope with its flap side down. 1Open Tray 1. 2Remove the lid of the tray. 3If the media pressure plate is raised, press down the media pressure plate to lock it into place. Downloaded From ManualsPrinter.com Manuals
Page 107
Loading Media 97 4Load the envelope with its flap to the right. Do not load the paper above the ↑ mark. For the informa- tion on the tray capacity for each media, see “Media Types” on page 85. For envelopes with the flap along the short edge, load the envelopes with the flap side down. 5Squeeze the media guide (length) and slide it to the desired size. 6Squeeze the media guide (width) and slide it to the desired size. Downloaded From ManualsPrinter.com Manuals
Page 108
Loading Media 98 7Reattach the lid of the tray. 8Push the tray completely into the printer. 9Select PAPER MENU/PAPER SOURCE/TRAY X (TRAY 1/2/3/ 4)/PAPER SIZE and PAPER TYPE in the configuration menu, and then select the setting for the size and type of the media that is loaded. See also “PAPER MENU” on page 36. Downloaded From ManualsPrinter.com Manuals
Page 109
Loading Media 99 Loading Label sheets/Postcards/Thick Stock/Thin paper/ Transparencies Transparencies for full-color printing cannot be used. Using them may lead to a printer malfunction. Remove transparencies as soon as they are output to the center out- put tray to prevent them sticking together. 1Open the tray and place it on a flat surface. 2Remove the lid of the tray. 3If the media pressure plate is raised, press down the media pressure plate to lock it into place. Downloaded From...
Page 110
Loading Media 100 4Squeeze the media guide (length) and slide it to the desired size. 5Squeeze the media guide (width) and slide it to the desired size. 6Load the paper face up in the tray. Do not load the paper above the ↑ mark. For the information on the tray capacity for each media, see “Media Types” on page 85. Downloaded From ManualsPrinter.com Manuals