Konica Minolta magicolor 2590MF User Manual

6Using the Copier
Downloaded From ManualsPrinter.com Manuals 

Making Basic Copies 88
Making Basic Copies
This section contains descriptions of the basic copy operation procedure and 
the functions that are frequently used when making copies, such as specify-
ing the zoom ratio and the copy density.
If the Fax key or Scan key lights up in green while copying, press the 
Copy key.
Change the media size from the PAPER SOURCE SETUP menu.
For details, refer to “PAPER SOURCE SETUP Menu” on page 29.
Basic Copy Operation
1Position the document to be 
copied.
For details...

Making Basic Copies 89
2Specify the desired copy settings.
For details on specifying the copy quality, refer to “Specifying the 
Copy Quality” on page 89.
For details on specifying the zoom ratio, refer to “Specifying the 
Zoom Ratio” on page 89. 
For details on selecting the copy density, refer to “Selecting the 
Copy Density” on page 91. 
For details on selecting the media tray, refer to “Selecting the 
Media Tray” on page 91. 
For details on setting 2in1 copying, refer to “Setting 2in1 Copying” 
on...

Making Basic Copies 90
Selecting a Preset Zoom Ratio
1Press the Reduce/Enlarge key until the desired zoom ratio is selected.
The zoom ratio changes in the following order with each press of the 
Reduce/Enlarge key.
When 
USER SETTING/PRESET ZOOM is set to METRIC: 
1.15
→1.41→2.00→0.50→0.70→0.81 
When 
USER SETTING/PRESET ZOOM is set to INCH: 
1.29
→1.54→2.00→0.50→0.64→0.78
The zoom ratio cannot be changed using the keypad.
Depending on the selected preset zoom ratio, a sample of the change 
to the...

Making Basic Copies 91 Selecting the Copy Density
If [A] is displayed, press the Light/Dark key twice to specify the copy 
density.
1Press the * or ) key to select the desired copy density. 
As the indicator is moved to the right, the density becomes darker. As the 
indicator is moved to the left, the density becomes lighter.
The copy density can also be selected by pressing the Light/Dark 
key. Press the Light/Dark key to display the DENSITY screen. Press 
the 
* or ) key to select the copy density,...

Making Advanced Copies 92
Making Advanced Copies
This section contains descriptions of setting 2in1 copying, ID card copying, 
duplex (Double-Sided) copying, and collated copying.
2in1 copying, duplex (Double-Sided) copying, ID card copying and 
collated copying cannot be combined.
Setting 2in1 Copying
If 2in1 copying is set, two document pages can be copied together onto a sin-
gle page.
With 2in1 copying, load the document into the ADF. 2in1 copying can-
not be performed by using the original glass....

Making Advanced Copies 93 ID Card Copying
With ID card copying, the back and front of a document, such as a certificate, 
are copied at full size on a single sheet of paper.
When ID card copying is set, the zoom ratio cannot be changed.
ID card copying can only be performed from the original glass. 
Align the document with the arrow on the left side toward the rear 
of the machine.
Since the areas 4 mm at the top and 4 mm at the left are not within 
the print area, those parts of the document are not...

Making Advanced Copies 94
4Press the * or ) key to select ON, and then press the Menu/Select key.
5To print color copies, press the Start-Color key. To print monochrome 
copies, press the Start-B&W key.
Scanning of the document begins.
6When NEXT PAGE appears, position the back side of the document at 
the same location as the front side, and then press the Start-Color or 
Start-B&W key.
After the back side has been scanned, printing automatically begins.
The main screen appears again.
Downloaded From...

Making Advanced Copies 95 Setting Duplex (Double-Sided) Copying
Duplex (Double-Sided) Copying From the ADF
If duplex (Double-Sided) copying is set, copies can be printed on both sides 
of the media.
The duplex option must be installed in order to set duplex (Dou-
ble-Sided) copying.
1Press the Function key.
2Press the + or , key to select 2.DUPLEX, and then press the Menu/
Select key.
If the duplex option is not installed, 2.DUPLEX does not appear.
This screen appears only if the duplex option is...

Making Advanced Copies 96
Duplex (Double-Sided) Copying From the Original Glass
Duplex (Double-Sided) copying can be performed either from the original 
glass or from the ADF. The description for duplex (Double-Sided) copying 
with the original glass is provided below.
1Position the document on the 
original glass.
For details on positioning 
the document on the orig-
inal glass, refer to “Plac-
ing a document on the 
original glass” on page 
71.
2Press the Function key and set duplex (Double-Sided)...