Konica Minolta magicolor 1650EN User Manual

Cleaning the Printer 7-6
Note
Do not touch the PC drum and the transfer belt on the imaging 
cartridge. 
Position the removed imaging 
cartridge horizontally as shown in 
the illustration at the right.
Be sure to keep the imaging 
cartridge horizontal and place it 
where it will not become dirty.
Do not leave the imaging 
cartridge removed for more than 
15 minutes, and do not place the 
removed imaging cartridge in a 
location where it would be 
exposed to direct light (such as 
sunlight).
3Clean the...

Cleaning the Printer7-7
CAUTION
The area around the fuser unit is 
extremely hot.
Touching anything other than the 
indicated levers may result in 
burns. If you get burned, 
immediately cool the skin under 
cold water, and then seek 
professional medical attention.
Note
Decreased print quality may 
result if the surface of the 
transfer roller is touched.
Be careful not to touch the 
surface of the transfer roller.
Downloaded From ManualsPrinter.com Manuals 

Cleaning the Printer 7-8
4Slowly insert the imaging car-
tridge vertically, and then push it 
slightly down toward you to fin-
ish reinstalling the imaging car-
tridge.
5Carefully close the top cover.
Downloaded From ManualsPrinter.com Manuals 

Cleaning the Printer7-9
Cleaning the Print Head Window
1Perform the operation described below to switch the printer to the P/H 
CLEAN UP mode.
Press Key Until Display Reads
IDLE
MENU
MAIN MANU
MAIN MENU 
PRINT MENU
 × 2MAIN MENU 
QUALITY MENU
QUALITY MENU
REPLACE TONER
 × 3QUALITY MENU
P/H CLEAN UP
P/H CLEAN UP
*YES
*YES
IS SELECTED
Then, it displays 
OPEN DOOR
REMOVE TONER
Downloaded From ManualsPrinter.com Manuals 

Cleaning the Printer 7-10
To exit P/H CLEAN UP mode, press the Cancel key.
2Open the front cover.
Before opening the front 
cover, open Tray 1 if it is 
not already open.
3The magenta toner cartridge has 
been moved to the position from 
where it can be replaced.
Pull down the handle on the 
toner cartridge until the toner 
cartridge is unlocked and moves 
out slightly toward you.
Remove the toner cartridge.
When the magenta toner 
cartridge is removed, a 
gap is created within the 
printer so that...

Cleaning the Printer7-11
Note
Do not touch the contact 
indicated in the illustration.
4Close the front cover.
The toner cartridge rotate 
within the printer.
5After the toner cartridges have 
finished rotating, open the top 
cover.
Downloaded From ManualsPrinter.com Manuals 

Cleaning the Printer 7-12
6Grab the handle and lift it up 
slightly to the back, and then 
slowly pull the imaging cartridge 
out vertically.
Note
Do not touch the PC drum and the transfer belt on the imaging 
cartridge. 
Position the removed imaging 
cartridge horizontally as shown in 
the illustration at the right.
Be sure to keep the imaging 
cartridge horizontal and place it 
where it will not become dirty.
Do not leave the imaging 
cartridge removed for more than 
15 minutes, and do not place the...

Cleaning the Printer7-13
7Clean the print head window by 
wiping it with a soft, dry cloth.
CAUTION
The area around the fuser unit is 
extremely hot.
Touching anything other than the 
indicated levers may result in 
burns. If you get burned, 
immediately cool the skin under 
cold water, and then seek 
professional medical attention.
BOTTOM
VIEW
Downloaded From ManualsPrinter.com Manuals 

Cleaning the Printer 7-14
Note
Decreased print quality may 
result if the surface of the 
transfer roller is touched.
Be careful not to touch the 
surface of the transfer roller.
8Slowly insert the imaging car-
tridge vertically, and then push it 
slightly down toward you to fin-
ish reinstalling the imaging car-
tridge.
Downloaded From ManualsPrinter.com Manuals 

Cleaning the Printer7-15
9Close the top cover.
10After the toner cartridges have 
finished rotating, open the front 
cover.
Downloaded From ManualsPrinter.com Manuals