Konica Minolta magicolor 1650EN User Manual

Replacing Consumables 6-20
3Push the blue handles back as 
far as possible.
4Grab the blue handles and lift 
the fuser unit to remove it.
Note
Do not touch the matching 
connectors of the fuser unit and 
the machine.
Downloaded From ManualsPrinter.com Manuals 

Replacing Consumables6-21
5Prepare a new fuser unit.
6Pull the fuser separator levers 
forward as far as possible.
Downloaded From ManualsPrinter.com Manuals 

Replacing Consumables 6-22
7Remove the fuser separator 
material, and then return the 
fuser separator levers to their 
original positions.
Note
Be careful not to touch the paper exit sensor and the surface of the 
fuser roller in the fuser unit.
8While lifting the fuser unit with 
the blue handles (one on each 
side), vertically insert the fuser 
unit.
Downloaded From ManualsPrinter.com Manuals 

Replacing Consumables6-23
Note
Do not touch the paper exit 
sensor on the fuser unit. 
Note
Do not touch the matching 
connectors of the fuser unit 
and the machine.
M
Downloaded From ManualsPrinter.com Manuals 

Replacing Consumables 6-24
9After the fuser unit is firmly 
installed, flip the blue handles 
down toward you.
10Carefully close the top cover.
11Reconnect the power cord, and 
turn on the printer.
Downloaded From ManualsPrinter.com Manuals 

Maintaining the
Printer
Downloaded From ManualsPrinter.com Manuals 

Maintaining the Printer 7-2
Maintaining the Printer
CAUTION
Read all caution and warning labels carefully, making sure to follow any 
instructions contained in them. These labels are located on the inside of 
the printer’s covers and the interior of the printer body.
Handle the printer with care to preserve its life. Abuse handling may cause 
damage and void your warranty. If dust and paper scraps remain on the 
inside or outside of the printer, printer performance and print quality will suffer, 
so the...

Maintaining the Printer7-3
„Do not leave the printer’s covers open for any length of time, especially in 
well-lit places; light may damage the imaging cartridge.
„Do not open the printer during printing.
„Do not tap media stacks on the printer.
„Do not lubricate or disassemble the printer.
„Do not tilt the printer.
„Do not touch the electrical contacts, gears, or laser devices. Doing so may 
damage the printer and cause the print quality to deteriorate.
„Keep media in the output tray at a minimum level....

Cleaning the Printer 7-4
Cleaning the Printer
CAUTION
Be sure to turn off the printer and unplug the power cord before 
cleaning. However, be sure to turn on the printer when cleaning the 
print head window.
Exterior
ReadyError
Cancel
Control Panel Ventilation Grill
Printer Exterior
Downloaded From ManualsPrinter.com Manuals 

Cleaning the Printer7-5 Interior
Cleaning the Media Feed Roller
1Open the top cover.
If there is paper in the 
output tray, remove it, 
and then fold up the out-
put tray before opening 
the top cover.
2Grab the handle and lift it up 
slightly to the back, and then 
slowly pull the imaging cartridge 
out vertically.
Downloaded From ManualsPrinter.com Manuals