Konica Minolta Di2011 User Manual

77.2 Specifying Machine Settings (“MACHINE SETTING” Menu)
7-8 Di1611/Di2011
Utility Mode – Copy Functions
Chapter 7
To set the “ENERGY SAVE MODE” (preheat mode) function
1Select the “MACHINE SETTING” 
menu.
❍Refer to “To select the “MACHINE 
SETTING” menu” on page 7-6.
2Press the [2] key from the 10-Key Pad 
to select “ENERGY SAVE MODE”.
3Using the 10-Key Pad, specify the 
length of time the machine is idle 
before it enters Energy Save mode, 
and then press the [Yes] key.
❍The timer can be set between...

7.2 Specifying Machine Settings (“MACHINE SETTING” Menu)7
Di1611/Di2011 7-9
Utility Mode – Copy Functions
Chapter 7
To set the “AUTO SHUT OFF” function
Precautions for setting the “AUTO SHUT OFF” function:
✔Whether or not auto shut-off is possible depends on the “AUTO SHUT OFF” 
function in the “ADMIN. MANAGEMENT” menu.
1Select the “MACHINE SETTING” 
menu.
❍Refer to “To select the “MACHINE 
SETTING” menu” on page 7-6.
2Press the [3] key from the 10-Key Pad 
to select “AUTO SHUT OFF”.
❍If the “AUTO SHUT...

77.2 Specifying Machine Settings (“MACHINE SETTING” Menu)
7-10 Di1611/Di2011
Utility Mode – Copy Functions
Chapter 7
✎
Note
If the Auto Shut Off function is performed and the machine is turned off, it will 
no longer be possible to make copies or print from a computer.
To make copies or print from a computer, turn on the machine.
Downloaded From ManualsPrinter.com Manuals 

7.2 Specifying Machine Settings (“MACHINE SETTING” Menu)7
Di1611/Di2011 7-11
Utility Mode – Copy Functions
Chapter 7
To specify the scanning image quality (“DENSITY(ADF)” function)
1Select the “MACHINE SETTING” 
menu.
❍Refer to “To select the “MACHINE 
SETTING” menu” on page 7-6.
2Press the [4] key from the 10-Key Pad 
to select “DENSITY(ADF)”.
✎
Note
If the Document Feeder is not 
installed, “
∗NOT AVAILABLE∗” 
appears.
3Using the and keys, select 
either “MODE1” or “MODE2”, and 
then press the [Yes]...

77.2 Specifying Machine Settings (“MACHINE SETTING” Menu)
7-12 Di1611/Di2011
Utility Mode – Copy Functions
Chapter 7
To specify the scanning image quality (“DENSITY(BOOK)” function)
1Select the “MACHINE SETTING” 
menu.
❍Refer to “To select the “MACHINE 
SETTING” menu” on page 7-6.
2Press the [5] key from the 10-Key Pad 
to select “DENSITY(BOOK)”.
3Using the and keys, select 
either “MODE1” or “MODE2”, and 
then press the [Yes] key.
The “MACHINE SETTING” menu 
appears again.
Downloaded From...

7.2 Specifying Machine Settings (“MACHINE SETTING” Menu)7
Di1611/Di2011 7-13
Utility Mode – Copy Functions
Chapter 7
To specify the printing density (“PRINT DENSITY” function)
1Select the “MACHINE SETTING” 
menu.
❍Refer to “To select the “MACHINE 
SETTING” menu” on page 7-6.
2Press the [6] key from the 10-Key Pad 
to select “PRINT DENSITY”.
3Using the and keys, select 
one of the five settings between 
“LIGHT” and “DARK”, and then press 
the [Yes] key.
The “MACHINE SETTING” menu 
appears again....

77.2 Specifying Machine Settings (“MACHINE SETTING” Menu)
7-14 Di1611/Di2011
Utility Mode – Copy Functions
Chapter 7
To set the “LCD CONTRAST” function
1Select the “MACHINE SETTING” 
menu.
❍Refer to“To select the “MACHINE 
SETTING” menu” on page 7-6.
2Press the [7] key from the 10-Key Pad 
to select “LCD CONTRAST”.
3Using the and keys, select 
one of the four settings between 
“LIGHT” and “DARK”, and then press 
the [Yes] key.
The “MACHINE SETTING” menu 
appears again.
Downloaded From ManualsPrinter.com...

7.2 Specifying Machine Settings (“MACHINE SETTING” Menu)7
Di1611/Di2011 7-15
Utility Mode – Copy Functions
Chapter 7
To set the “LANGUAGE” function
1Select the “MACHINE SETTING” 
menu.
❍Refer to “To select the “MACHINE 
SETTING” menu” on page 7-6.
2Press the [8] key from the 10-Key Pad 
to select “LANGUAGE”.
3Using the and keys, select the 
desired language, and then press the 
[Yes] key.
The “MACHINE SETTING” menu 
appears again.
Downloaded From ManualsPrinter.com Manuals 

77.3 Setting Up the Paper Sources (“PAPER SOURCE SETUP” Menu)
7-16 Di1611/Di2011
Utility Mode – Copy Functions
Chapter 7
7.3 Setting Up the Paper Sources (“PAPER SOURCE 
SETUP” Menu)
From the “PAPER SOURCE SETUP” menu, the various settings for the paper trays 
can be changed.
“PAPER SOURCE SETUP” menu:
No.PAPER SOURCE SETUPDescription
1 INCH/METRIC This function can be used to set the size measurement system 
for the paper loaded in each tray. It can be used to select 
whether paper measured in...

7.3 Setting Up the Paper Sources (“PAPER SOURCE SETUP” Menu)7
Di1611/Di2011 7-17
Utility Mode – Copy Functions
Chapter 7
To select the “PAPER SOURCE SETUP” menu
1Press the [Utility] key.
“MACHINE SETTING?” appears.
2Press the key once to select 
“PAPER SOURCE SETUP?”.
3From the 10-Key Pad, press the key for the “PAPER SOURCE SETUP” function 
that you wish to set.
❍The “PAPER SOURCE SETUP” functions are as follows:
1 INCH/METRIC
2 TRAY1 PAPER
3 PAPER TYPE
✎
Tip
If, at any time, you wish to quit setting a...