Konica Minolta Di2011 User Manual

66.7 Programmed Copy Jobs
6-22 Di1611/Di2011
Advanced Copy Operations
Chapter 6
To recall a copy program
1Load the document to be copied.
❍Refer to “Loading the Document” on page 3-9.
2Press the [Copy Program] key.
3Using the and keys, select 
“RECALL”, and then press the [Yes] 
key.
4Using the and keys, select 
the program number of the copy 
program that you wish to recall, and 
then press the [Yes] key.
5Press the [Start] key.
Downloaded From ManualsPrinter.com Manuals 

6.8 Access Numbers6
Di1611/Di2011 6-23
Advanced Copy Operations
Chapter 6
6.8 Access Numbers
If access number have been specified, use of the machine can be limited to a 
specific user and the number of copies for each user can be controlled. As an 
example, the following procedure describes how to enter the access number in 
order to make copies.
✎
Note
If access numbers have been specified, the machine cannot be used unless the 
access number is entered first.
In order to use this function, the access...

66.8 Access Numbers
6-24 Di1611/Di2011
Advanced Copy Operations
Chapter 6
Downloaded From ManualsPrinter.com Manuals 

Utility Mode – Copy Functions
Chapter 7
7
7Utility Mode –
Copy Functions
Downloaded From ManualsPrinter.com Manuals 

7 
7-2 Di1611/Di2011
Utility Mode – Copy Functions
Chapter 7
This chapter describes the various Utility mode functions that can be used to set 
copy-related functions.
✎
Note
Depending on the options installed, some functions may not be available. If an 
unavailable functions is selected, an error message appears.
Downloaded From ManualsPrinter.com Manuals 

7.1 Utility Menu Commands7
Di1611/Di2011 7-3
Utility Mode – Copy Functions
Chapter 7
7.1 Utility Menu Commands
Manufacturer’s default settings appear in bold.
MenuFunctionSettings
1 MACHINE SETTING AUTO PANEL RESETON (0.5/1/2/3/4/5, Default: 1)/OFF
ENERGY SAVE MODE TIMER=1-240 min. (Default: 15)
AUTO SHUT OFF ON (TIMER=15-240 min.)/OFF
DENSITY (ADF)MODE1/MODE2
DENSITY (BOOK)MODE1/MODE2
PRINT DENSITY LIGHT to DARK (5 levels)
LCD CONTRAST LIGHT to DARK (4 levels)
LANGUAGE Default: ENGLISH
2 PAPER SOURCE...

77.1 Utility Menu Commands
7-4 Di1611/Di2011
Utility Mode – Copy Functions
Chapter 7
*“1-SIDE” is displayed only when the machine is equipped with the duplex unit.
** Only with Di20116 COPY SETTING 2 MIXED ORIGINAL ON/OFF
COPY PRIORITYAP/AS/MANUAL
OUTPUT PRIORITYNON/SORT/GROUP
4IN1 COPY ORDERPATTERN1/PATTERN2
CRISSCROSS MODEON/OFF
DUPLEX COPY ON/OFF
MenuFunctionSettings
Downloaded From ManualsPrinter.com Manuals 

7.2 Specifying Machine Settings (“MACHINE SETTING” Menu)7
Di1611/Di2011 7-5
Utility Mode – Copy Functions
Chapter 7
7.2 Specifying Machine Settings (“MACHINE 
SETTING” Menu)
From the “MACHINE SETTING” menu, the following machine settings can be 
changed.
“MACHINE SETTING” menu:
No.MACHINE SETTINGDescription
1 AUTO PANEL RESET This function can be used to set the length of time until the auto 
panel reset operation is performed after copying or the last operation 
is finished. When the auto panel reset...

77.2 Specifying Machine Settings (“MACHINE SETTING” Menu)
7-6 Di1611/Di2011
Utility Mode – Copy Functions
Chapter 7
To select the “MACHINE SETTING” menu
1Press the [Utility] key.
“MACHINE SETTING?” appears.
2From the 10-Key Pad, press the key for the “MACHINE SETTING” function that 
you wish to set.
❍The “MACHINE SETTING” functions are as follows:
1 AUTO PANEL RESET
2 ENERGY SAVE MODE
3 AUTO SHUT OFF
4 DENSITY (ADF)
5 DENSITY (BOOK)
6 PRINT DENSITY
7 LCD CONTRAST
8 LANGUAGE
✎
Tip
If, at any time, you...

7.2 Specifying Machine Settings (“MACHINE SETTING” Menu)7
Di1611/Di2011 7-7
Utility Mode – Copy Functions
Chapter 7
To set the “AUTO PANEL RESET” function
1Select the “MACHINE SETTING” 
menu.
❍Refer to “To select the “MACHINE 
SETTING” menu” on page 7-6.
2Press the [1] key from the 10-Key Pad 
to select “AUTO PANEL RESET”.
3Using the and keys, select 
either “ON” or “OFF”, and then press 
the [Yes] key.
❍If “OFF” was selected, the 
“MACHINE SETTING” menu 
appears again.
4Using the and keys, select...