Konica Minolta Di2011 User Manual

55.5 Selecting the Paper Source
5-22 Di1611/Di2011
Before Making Copies
Chapter 5
5.5 Selecting the Paper Source
The paper used for making copies can be selected in two ways.
Auto Paper:
If the Auto Paper function is selected, the paper tray containing the most 
suitable size of paper is selected based on the size of the document and the 
specified zoom ratio.
Manual paper selection:
The paper that you wish to use for copying can be selected.
To make copies using the Auto Paper function
1Load the...

5.5 Selecting the Paper Source5
Di1611/Di2011 5-23
Before Making Copies
Chapter 5
To copy with a manually selected paper size
1Load the document to be copied.
❍Refer to “Loading the Document” on page 3-9.
2Press the [Paper] key, and then select 
the desired paper size.
❍Check that the correct paper size 
appears in the bottom line of the 
screen.
3If necessary, specify any other copy settings.
❍Zoom (p. 5-30)
❍Copy density (p. 5-36)
❍Advanced Copy Operations (p. 6-1)
4Using the 10-Key Pad, enter the...

55.5 Selecting the Paper Source
5-24 Di1611/Di2011
Before Making Copies
Chapter 5
To load special paper into the 1st Tray
If special paper, such as OHP transparencies, postcards or cards are loaded into 
the 1st Tray, first set the “TRAY1 PAPER” function in the “PAPER SOURCE 
SETUP” menu of the Utility mode (“To specify the size of paper loaded into the 1st 
Tray (“TRAY1 PAPER” function)” on page 7-19).
Depending on the paper type set for the “TRAY1 PAPER” function, the screen 
changes as shown below....

5.5 Selecting the Paper Source5
Di1611/Di2011 5-25
Before Making Copies
Chapter 5
Automatically Selecting the Paper Source
With the auto tray switching feature, printing can continue with paper from a 
different paper drawer if the currently selected drawer runs out of paper during 
printing.
✎
Note
If paper is loaded into the Manual Bypass, the auto tray switching feature does 
not function.
The auto tray switching feature functions if the currently selected paper drawer and 
another paper drawer...

55.5 Selecting the Paper Source
5-26 Di1611/Di2011
Before Making Copies
Chapter 5
Order for Automatically Switching Paper Drawers
When a different paper drawer is automatically selected, the next paper drawer in 
the following list is chosen.
1st paper drawer → 2nd paper drawer → 3rd paper drawer → 4th paper drawer 
→ 5th paper drawer → Multiple Bypass
✎
Note
If special media, such as OHP transparencies or label sheets, are loaded into 
the 1st paper drawer or the Multiple Bypass, the auto tray switching...

5.6 Original Documents5
Di1611/Di2011 5-27
Before Making Copies
Chapter 5
5.6 Original Documents
Using the Document Feeder
The document feeder automatically feeds in, scans, then feeds out each page of a 
multi-page document, one page at a time. The correct type of document must be 
loaded in order for the document feeder to function properly.
Using an incorrect type of document may cause a paper misfeed or damage to the 
document or machine.
✎
Note
In order to copy double-sided documents, the Duplexing...

55.6 Original Documents
5-28 Di1611/Di2011
Before Making Copies
Chapter 5
Documents of Uniform Sizes
Mixed Width Document Sizes (AFR-19)
2: Copying possible
—: Copying not possible
Document feed 
methodDocument typeDocument size
Document Feeder Sheet documents
Single-sided documents
AF-12
Capacity: 50 g/m
2 to 110 g/m2
AFR-19
Capacity: 35 g/m2 to 128 g/m2
Double-sided documents
AFR-19
Capacity: 50 g/m
2 to 128 g/m2
Documents of mixed sizes
AF-12
Capacity: 60 g/m
2 to 90 g/m2
AFR-19
Capacity: 50 g/m2...

5.6 Original Documents5
Di1611/Di2011 5-29
Before Making Copies
Chapter 5
Precautions Concerning the Documents
The following types of documents should not be loaded into the Duplexing 
Document Feeder, otherwise paper misfeeds or damage to the document may 
occur. Instead, these types of documents should be positioned on the original 
glass.
Documents on special paper
Folded documents (folded in half or fanned)
Highly translucent or transparent documents, such as diazo photosensitive 
paper
Documents...

55.7 Specifying a Zoom Setting
5-30 Di1611/Di2011
Before Making Copies
Chapter 5
5.7 Specifying a Zoom Setting
By specifying a zoom ratio, the copy can be enlarged or reduced.
Zoom Settings
“Zoom” settingDescription
Full size Copies are made at the same size as the document (
× 1.00).
“AUTO”  zoom  ratio The most appropriate zoom ratio is automatically selected based on the 
size of the document loaded and the specified paper size.
Preset zoom ratios The following common zoom ratios for copying from...

5.7 Specifying a Zoom Setting5
Di1611/Di2011 5-31
Before Making Copies
Chapter 5
To make copies using the “AUTO” zoom setting
1Load the document to be copied.
❍Refer to “Loading the Document” on page 3-9.
2Press the [Auto Paper/Auto Size] key 
until the Auto Size function is 
selected.
❍Check that “AUTO” appears in the 
top line of the screen.
3Press the [Paper] key, and then select 
the desired paper size.
4If necessary, specify any other copy settings.
❍Copy density (p. 5-36)
❍Advanced Copy Operations...