Konica Minolta Di2011 User Manual

44.3 Copying Onto Various Types of Media
4-8 Di1611/Di2011
Useful Operations
Chapter 4
To copy onto label sheets
As an example, the following procedure describes how to make copies onto 
200 mm × 250 mm label sheets loaded into the 1st Tray.
1Position the document(s) to be copied.
❍Refer to “Loading the Document” on page 3-9.
2Adjust the paper guides in the 1st 
Tray, and load the label sheets.
❍Load label sheets so that the 
surface to be printed on faces 
upward, as shown in the 
illustration.
3Press...

4.3 Copying Onto Various Types of Media4
Di1611/Di2011 4-9
Useful Operations
Chapter 4
5Press the or key to select 
“CARD”, and then press the [Yes] key.
6Press the or key to select 
“SIZE INPUT”, and then press the 
[Yes] key.
7Using the 10-Key Pad, type in “200” 
for the length (x), and then press the 
[Yes] key.
❍The length of the paper (x) can be 
set between 140 mm and 432 mm.
❍To correct the entered value, 
press the [No] key.
8Using the 10-Key Pad, type in “250” 
for the width (y), and then press...

44.3 Copying Onto Various Types of Media
4-10 Di1611/Di2011
Useful Operations
Chapter 4
11If necessary, specify any other copy settings.
❍Before Making Copies (p. 5-1)
❍Advanced Copy Operations (p. 6-1)
12Press the [Start] key.
Downloaded From ManualsPrinter.com Manuals 

4.3 Copying Onto Various Types of Media4
Di1611/Di2011 4-11
Useful Operations
Chapter 4
To copy onto envelopes (non-standard size)
As an example, the following procedure describes how to make copies onto 
200 mm × 150 mm envelopes loaded into the Manual Bypass.
✎
Note
When loading non-standard-sized documents and paper, be sure to first 
measure their size.
The Document Scales at the edges of the Original Glass are useful for 
measuring documents and paper.
1Position the document(s) to be copied.
❍Refer...

44.3 Copying Onto Various Types of Media
4-12 Di1611/Di2011
Useful Operations
Chapter 4
3Press the [No] key.
The “PAPER SOURCE SETUP” 
menu appears.
4Press the or key to select 
“ENVELOPE”, and then press the 
[Yes] key.
The “PAPER SIZE” menu appears.
5Press the key.
The length (x) setting appears.
6Using the 10-Key Pad, type in “200” 
for the length (X), and then press the 
[Yes] key.
❍The length of the paper (x) can be 
set between 140 mm and 432 mm.
❍To correct the entered value, 
press the [No] key....

4.3 Copying Onto Various Types of Media4
Di1611/Di2011 4-13
Useful Operations
Chapter 4
✎
Tip
Refer to the diagram at the right 
and be sure to specify the paper 
width and length measurements 
correctly.
7Using the 10-Key Pad, type in “150” 
for the width (y).
❍The width of the paper (y) can be 
set between 90 mm and 297 mm.
❍To correct the entered value, 
press the [No] key.
8Press the [Yes] key.
The main screen appears.
9If necessary, specify any other copy settings.
❍Before Making Copies (p. 5-1)...

44.3 Copying Onto Various Types of Media
4-14 Di1611/Di2011
Useful Operations
Chapter 4
To copy onto postcards
As an example, the following procedure describes how to make copies onto 
148 mm × 100 mm postcards loaded into the Manual Bypass.
1Position the document(s) to be copied.
❍Refer to “Loading the Document” on page 3-9.
2Adjust the paper guides for the 
Manual Bypass, and load the 
postcards.
❍Load postcards with the shorter 
side as the leading edge, as 
shown in the illustration.
✎
Note
Load...

4.3 Copying Onto Various Types of Media4
Di1611/Di2011 4-15
Useful Operations
Chapter 4
4Press the or key to select 
“ENVELOPE”, and then press the 
[Yes] key.
The “PAPER SIZE” menu appears.
5Press the key.
The length (x) setting appears.
6Using the 10-Key Pad, type in “148” 
for the length (x), and then press the 
[Yes] key.
❍The length of the paper (x) can be 
set between 140 mm and 432 mm.
❍To correct the entered value, 
press the [No] key.
✎
Tip
Refer to the diagram at the right 
and be sure to...

44.3 Copying Onto Various Types of Media
4-16 Di1611/Di2011
Useful Operations
Chapter 4
7Using the 10-Key Pad, type in “100” 
for the width (y).
❍The width of the paper (y) can be 
set between 90 mm and 297 mm.
❍To correct the entered value, 
press the [No] key.
8Press the [Yes] key.
The main screen appears.
9If necessary, specify any other copy settings.
❍Before Making Copies (p. 5-1)
❍Advanced Copy Operations (p. 6-1)
10Press the [Start] key.
✎
Note
When making copies using the Manual Bypass, continue...

Before Making Copies
Chapter 5
5
5Before Making
Copies
Downloaded From ManualsPrinter.com Manuals