Konica Minolta Di2011 User Manual

22.5 Part Names and Their Functions
2-16 Di1611/Di2011
Precautions
Chapter 2
Job Separator (Optional)
No.Part NameDescription
12 Copy Tray Lamp Lights up when paper is fed into the Upper Copy Tray.
13 Upper Copy Tray Collects computer printouts.
14 Lower Copy Tray Collects copies.
With the Job Separator installed
12
13
14
Downloaded From ManualsPrinter.com Manuals 

2.6 Names of Control Panel Parts and Their Functions2
Di1611/Di2011 2-17
Precautions
Chapter 2
2.6 Names of Control Panel Parts and Their Functions
Control Panel Parts and Their Functions
No.Part NameFunction
1“Error” indicator Flashes when an error has occurred.
Refer to “Error Messages” on page 8-1.
2 [Printer] key/indicator Lights up while data is being printed from the computer and 
flashes while data is being sent.
For details, refer to the Printer Controller User Manual.
3 [Status] key Used to view...

22.6 Names of Control Panel Parts and Their Functions
2-18 Di1611/Di2011
Precautions
Chapter 2
11 [Auto/Photo] 
key, and keysUsed to specify the scanning density of copies.
Used to specify the selection at the left or right in setting 
screens.
12 [Erase] key Used to select the area of the document that is erased.
13 [File Margin] key Press to select the “File Margin” function.
14 [Finishing] key Used to select a copy “Finishing” function.
15 [X/Y  Zoom] key Used to specify different scaling...

2.6 Names of Control Panel Parts and Their Functions2
Di1611/Di2011 2-19
Precautions
Chapter 2
No.Part NameFunction
21 Scan key Press to enter Scan mode. The indicator lights up in green to 
indicate that the machine is in Scan mode.
(Available only when the Network Interface Card NC-6 and the 
Internet Fax & Network Scan Kit SU-6 are installed.)
22 Fax key Does not function on this machine.
23 Copy key Press to enter Copy mode. The indicator lights up in green to 
indicate that the machine is in Copy...

22.6 Names of Control Panel Parts and Their Functions
2-20 Di1611/Di2011
Precautions
Chapter 2
Display Indications
1
2
6
7
54
3 

No.Display IndicationDescription
1 Copy density (document 
type)Indicates the document type for the copy density setting.
“PHOTO”, “TEXT”, or “TEXT/P”
2 Copy density (density level) Indicates the density level for the copy density setting.
3 Paper source Indicates the selected paper tray. If special paper is selected, 
the paper type is displayed.
“AUTO”, a paper tray and...

2.6 Names of Control Panel Parts and Their Functions2
Di1611/Di2011 2-21
Precautions
Chapter 2
Adjusting the Angle of the Display
The display can be adjusted to any of three angles.
Adjust the display to the angle that allows for easy operation.
➜Press an edge of the display to adjust it to the desired angle.
Upper positionMiddle position
Lower position
Downloaded From ManualsPrinter.com Manuals 

22.7 Power Supply
2-22 Di1611/Di2011
Precautions
Chapter 2
2.7 Power Supply
To turn on the machine
Set the Power Switch to “I”.
The indicator on the [Start] key lights up in 
orange, and the message “∗PLEASE 
WAIT!∗” appears in the display.
✎
Note
If the [Start] key is pressed while the 
indicator is lit in orange, the copy job is 
queued. When the indicator on the 
[Start] key lights up in green, the 
loaded document is scanned and 
copies are produced.
To turn off the machine
1Check that all jobs are...

2.7 Power Supply2
Di1611/Di2011 2-23
Precautions
Chapter 2
Auto Panel Reset
With the auto panel reset operation, the Copy mode screen appears after copying 
or after a specified length of time has passed after the last operation is finished. 
(Manufacturer’s default setting: 1 minute)
✎
Tip
The length of time until the auto panel reset operation is performed can be set 
to 30 seconds or a setting between 1 and 5 minutes.
In addition, the Auto Panel Reset function can be disabled.
For details, refer to...

22.7 Power Supply
2-24 Di1611/Di2011
Precautions
Chapter 2
Queued Copy Jobs
Copy jobs can be queued by loading the document and pressing the [Start] key 
while “∗PLEASE WAIT!∗” appears in the display.
When the indicator on the [Start] key lights up in green, scanning of the loaded 
document begins, and copies are produced.
Downloaded From ManualsPrinter.com Manuals 

Basic Operations
Chapter 3
3
3Basic
Operations
Downloaded From ManualsPrinter.com Manuals