Konica Minolta Di2011 User Manual

55.1 Paper
5-2 Di1611/Di2011
Before Making Copies
Chapter 5
5.1 Paper
Use paper that meets the following specifications.
Paper Types
2: Available—: Not available
✎
Note
The 2nd paper drawer, the 3rd paper drawer, the 4th paper drawer, the 5th 
paper drawer and the Multiple Bypass are optional.
If the optional Duplex Unit is used to make double-sided copies, only plain and 
recycled paper can be used.
Paper TypePlain PaperSpecial 
MediaRecycled 
Paper
Weight (g/m2)
Paper Source, Etc.60 to 90 g/m291 to...

5.1 Paper5
Di1611/Di2011 5-3
Before Making Copies
Chapter 5
Paper Sizes
Non-standard-sized paper
Standard-sized paper
2: Available—: Not available
✎
Note
The 2nd paper drawer, the 3rd paper drawer, the 4th paper drawer, the 5th 
paper drawer and the Multiple Bypass are optional.
If the optional Duplex Unit is used to make double-sided copies, only plain and 
recycled paper can be used.
Paper SourcePaper WidthPaper Length
Manual Bypass 90 mm to 297 mm 140 mm to 432 mm
Multiple Bypass 90 mm to 297 mm 140...

55.1 Paper
5-4 Di1611/Di2011
Before Making Copies
Chapter 5
Paper Capacity
—: Not available
✎
Note
The 2nd paper drawer, the 3rd paper drawer, the 4th paper drawer, the 5th 
paper drawer and the Multiple Bypass are optional.
If the optional Duplex Unit is used to make double-sided copies, only plain and 
recycled paper can be used.
Paper TypePlain PaperSpecial 
MediaRecycled 
Paper
Weight (g/m2)
Paper Source, Etc.60 to 90 g/m291 to 157
g/m260 to 90 g/m2
Manual Bypass 1 sheet 1 sheet 1 sheet
Multiple...

5.1 Paper5
Di1611/Di2011 5-5
Before Making Copies
Chapter 5
Unsuitable Paper
The following types of paper should not be used, otherwise decreased print quality, 
paper misfeeds or damage to the machine may occur.
OHP transparencies that have already been fed through the machine
Even if the transparency is still blank, do not reuse it.
Paper that has been printed on by a heat-transfer printer or an inkjet printer
Paper that is either extremely thick or extremely thin
Folded, curled, wrinkled, or torn...

55.2 Print Area
5-6 Di1611/Di2011
Before Making Copies
Chapter 5
5.2 Print Area
Any part of the image within the area indicated below is not copied.
A margin 4 mm (at full size) from the trailing edge of the paper (A)
A margin 4 mm (at full size) from the leading edge of the paper (B)
A margin 4 mm (at full size) on both sides of the paper (C)
For details on using the machine to print from a computer when the printer controller 
is installed, refer to the Printer Controller User Manual.
AB
C
C
A: 4 mm...

5.3 Paper Storage5
Di1611/Di2011 5-7
Before Making Copies
Chapter 5
5.3 Paper Storage
Observe the following precautions when storing the paper.
Store the paper in a location that meets the following requirements.
❍Not exposed to direct sunlight
❍Not exposed to a flame
❍Not exposed to high humidity
❍Not extremely dusty
Unwrapped paper should be placed in a plastic bag and stored in a cool, dark 
location.
Keep paper out of the reach of children.
Downloaded From ManualsPrinter.com Manuals 

55.4 Making Copies on Manually Fed Paper
5-8 Di1611/Di2011
Before Making Copies
Chapter 5
5.4 Making Copies on Manually Fed Paper
Manually feed the copy paper if you wish to make copies onto paper not loaded into 
any paper tray, or onto special paper, such as OHP transparencies, postcards or 
cards.
Paper That Can Be Fed Manually
Paper types:
Plain or recycled paper (thickness: 60 g/m2 to 90 g/m2)
Special paper
❍Cards (thickness: 91 g/m2 to 157 g/m2)
❍OHP transparencies
❍Postcards
❍Label sheets...

5.4 Making Copies on Manually Fed Paper5
Di1611/Di2011 5-9
Before Making Copies
Chapter 5
Adjusting the Multiple Bypass
Adjust the Bypass Tray Extender to fit the size of the paper as shown below.
Downloaded From ManualsPrinter.com Manuals 

55.4 Making Copies on Manually Fed Paper
5-10 Di1611/Di2011
Before Making Copies
Chapter 5
Loading Paper Into the Bypass Trays
To load plain paper
Load the paper into the Manual Bypass one sheet at a time.
Up to 100 sheets of paper can be loaded into the Multiple Bypass. Do not load so 
much paper into the Multiple Bypass that the top of the stack is higher than 
the mark.
✎
Note
When paper other than plain paper is loaded, the paper type must be specified.
1Load the paper into the Bypass Tray.
?Have the...

5.4 Making Copies on Manually Fed Paper5
Di1611/Di2011 5-11
Before Making Copies
Chapter 5
Loading Special Paper Into the Bypass Trays
To load postcards
Load the paper into the Manual Bypass one sheet at a time.
Up to 20 sheets of paper can be loaded into the Multiple Bypass.
➜When loading postcards, load them with the shorter side as the leading edge, 
as shown in the illustration, and with the side to be printed on facing down.
✎
Note
Do not load postcards crosswise.
After you have loaded the...