Konica Minolta bizhub C360 User Manual

bizhub C360/C280/C2208-16
8.4 Report printed for G3 fax8
8.4 Report printed for G3 fax
8.4.1 [Polling TX Report]
The result of polling transmission is printed automatically.
You can select ON, If TX Fails, or OFF from [TX Result Report] in the Utility menu.
8.4.2 [Polling RX Report]
Printed automatically when a polling document is received.
You can select ON, If TX Fails, or OFF from [TX Result Report] in the Utility menu.
8.4.3 [Sequential Polling RX Report]
The result of polling reception to multiple...

bizhub C360/C280/C2208-17
8.4 Report printed for G3 fax8
8.4.4 [Reservation Communication Report]
Printed automatically when a timer transmission is specified.
You can enable or disable this report to be printed in [Timer Reservation TX Report] in the Utility menu.
8.4.5 [Reservation Polling TX Report]
Printed automatically when a polling transmission is reserved (when a document is saved in the Polling Trans-
mission User Box of this machine).
You can enable or disable this report to be printed in...

bizhub C360/C280/C2208-18
8.4 Report printed for G3 fax8
8.4.7 [An address Polling Rx Reserved Report]
Printed automatically when a polling reception to single destination is reserved.
You can enable or disable this report to be printed in [Timer Reservation TX Report] in the Utility menu.
8.4.8 [Sequence Polling Rx Reserved Report]
Printed automatically when a polling reception to multiple destinations is reserved.
You can enable or disable this report to be printed in [Timer Reservation TX Report] in...

bizhub C360/C280/C2208-19
8.4 Report printed for G3 fax8
8.4.10 [Bulletin TX Report](Polling TX Report)
Printed automatically when a polling transmission is executed to the document saved in the bulletin board.
You can enable or disable this report to be printed in [Bulletin TX Report] in the Utility menu.
8.4.11 [Relay TX Result Report]
This report is printed automatically upon transmission of a document to the relay distribution destination 
when this machine functioned as the relay distribution...

bizhub C360/C280/C2208-20
8.4 Report printed for G3 fax8
8.4.13 [PC-Fax TX Error Report]
Printed automatically when an error occurs in PC-FAX transmission.
You can enable or disable this report to be printed in [PC-Fax TX Error Report] in the Utility menu.
Downloaded From ManualsPrinter.com Manuals 

bizhub C360/C280/C2208-21
8.5 Report printed for Internet Fax8
8.5 Report printed for Internet Fax
8.5.1 [Internet Fax Rx Error Report]
Printed automatically when the reception of Internet Fax or IP Address Fax fails.
You can enable or disable this report to be printed in [Network Fax RX Error Report] in the Utility menu.
8.5.2 [Print MDN Message]
When the sender (this machine) requests the recipients machine to confirm that the E-mail message is un-
sealed, the receiver sends an MDN message to the...

bizhub C360/C280/C2208-22
8.5 Report printed for Internet Fax8
8.5.4 [Print E-mail Message Body]
Specify whether to print the body of the received E-mail message automatically or not.
You can specify whether to print or not in [Print E-mail Message Body] in the Utility menu.
Reference
-Even if [Print E-mail Message Body] is set to [ON], the body of the received E-mail message is not print-
ed if Content-XCIAJWNETFAX:IGNORE is included in the header, or there is no text in the body.
-If the received...

bizhub C360/C280/C2208-23
8.5 Report printed for Internet Fax8
Print sample
Downloaded From ManualsPrinter.com Manuals 

bizhub C360/C280/C2208-24
8.6 Report printed for IP8
8.6 Report printed for IP
8.6.1 [Network Fax RX Error Report]
For details, refer to page 8-21.
Downloaded From ManualsPrinter.com Manuals 

9User Mode Settings
Downloaded From ManualsPrinter.com Manuals