Konica Minolta bizhub C360 User Manual

bizhub C360/C280/C2206-2
6.1 Receiving (G3: Without external telephone connected)6
6 Receiving (G3/IP/I-FAX)
This section explains the types of fax reception and respective operations.
6.1 Receiving (G3: Without external telephone connected)
6.1.1 Auto RX (Dedicated for fax line)
Specify this mode to use the telephone line dedicated for fax transmission. The machine automatically starts 
receiving fax data when it detects the ring signal for the specified times.
Reference
-To receive fax data in auto...

bizhub C360/C280/C2206-3
6.2 Receiving (G3: With external telephone connected)6
6.2 Receiving (G3: With external telephone connected)
6.2.1 Manual RX (Dedicated telephone line)
It is convenient to set the machine to manual mode if an external telephone is connected to this machine and 
the line is primarily used for telephone communication.
Reference
-To use the line dedicated for telephone communication, [Receive Mode] must be set to Manual RX in 
[Line Parameter Setting] of the Utility menu.
To receive...

bizhub C360/C280/C2206-4
6.3 Receiving (I-FAX)6
6.3 Receiving (I-FAX)
E-mail messages can be received either automatically or manually. When this machine receives an E-mail 
message, the E-mail text and attachment file are printed automatically.
Data is saved in the Memory RX User Box if [Memory RX Setting] is enabled in the Utility menu. The saved 
documents can be printed as needed.
dReference
For details on printing documents saved in the Memory RX User Box, refer to the [Users Guide Box Opera-...

bizhub C360/C280/C2206-5
6.4 Receiving (IP)6
6.4 Receiving (IP)
This machine prints data automatically upon reception of IP Address Fax.
Data is saved in the Memory RX User Box if [Memory RX Setting] is enabled in the Utility menu. The saved 
documents can be printed as needed.
dReference
For details on printing documents saved in the Memory RX User Box, refer to the [Users Guide Box Opera-
tions].
Downloaded From ManualsPrinter.com Manuals 

bizhub C360/C280/C2206-6
6.5 In-memory proxy reception6
6.5 In-memory proxy reception
6.5.1 In-memory proxy reception
When it is unable to print a received document due to paper jamming, running short of consumables or other 
reasons, data is saved in the memory until the machine is ready to print it again. This function is referred to 
as In-memory proxy reception.
-After recovering from trouble such as paper jamming, the saved reception document is printed auto-
matically.
-This function may not be...

bizhub C360/C280/C2206-7
6.6 Printing upon data reception6
6.6 Printing upon data reception
When a document is received, the paper size of the received document is compared with the paper size in 
the paper tray, and the document is printed either by being reduced to the specified zoom ratio, or to the size 
that the document fits the paper size to be printed. If the machine is configured to print received documents 
in the same magnification, received documents are printed in full size regardless the...

bizhub C360/C280/C2206-8
6.6 Printing upon data reception6
6.6.2 Printing at reduced size to fit the paper size to be printed
If a document size longer than the standard size is received, the optimal paper size is determined based on 
the width and length of the received document and printed accordingly. If the optimal-size paper is not load-
ed in the paper tray, the document size is reduced to the near-size paper.
The following describes the procedure to determine the optimal paper size and criteria...

bizhub C360/C280/C2206-9
6.6 Printing upon data reception6
Width of re-
ceived docu-
mentPrint posi-
tion of recep-
tion 
informationLength of received document
A4-width [OFF] or [In-
side Body 
Text]0 to 154 155 to 314 315 to 386 387 or more
[Outside Body 
Text]0 to 146 147 to 306 307 to 378 379 or more
Paper size to be selected A5 vA4 wB4 wA3 w
B4-width [OFF] or [In-
side Body 
Text]0 to 195 196 to 395 396 or more
[Outside Body 
Text]0 to 186 187 to 386 387 or more
Paper size to be selected B5 vB4 wA3...

bizhub C360/C280/C2206-10
6.6 Printing upon data reception6
Step 2: Select actual print paper size
Checks whether the paper size determined in Step 1 is loaded in the machine or not.
-Optimal paper size loaded: 
Printing starts.
-Optimal paper size unavailable, or [Auto Tray Switch ON/OFF] (automatic paper tray switching function) 
of the paper tray is set to [Restrict]: 
The alternative paper size is searched for in the descending order as shown in the table. At this time, if 
[Print Separate Fax Pages]...

bizhub C360/C280/C2206-11
6.6 Printing upon data reception6
For the paper sizes of B5 w, B5 v, A4 w and A4 v, the document is divided and printed on multiple pages. Optimal paper size 5-1/2 e 8-
1/2 v8-1/2 e 11 
w8-1/2 e 11 v8-1/2 e 14 
w11 e 17 w
Paper selection order
(From top to bottom)5-1/2 e 8-
1/2 v8-1/2 e 11 
w8-1/2 e 11 v8-1/2 e 14 
w11 e 17 w
5-1/2 e 8-
1/2 wA4 w8-1/2 e 11 
w11 e 17 wA3 w
A5 v8-1/2 e 14 
wA4 vB4 w8-1/2 e 11 v
A5 w11 e 17 wA4 wA3 w8-1/2 e 11 
w
8-1/2 e
 11 
wB4 w8-1/2 e 14...