Konica Minolta bizhub C360 User Manual

bizhub C360/C280/C2205-60
5.12 Communication Settings5
[Subject]
The text specified in the Utility menu is automatically displayed. To change the contents, press [Direct Input]. 
You can enter up to 64 characters.
[From]
The E-mail address of the administrator specified in the Utility menu is displayed.
Reference
-The E-mail address of this machine is used for Internet faxing.
-You cannot directly enter the address when [Change the From Address] is set to Restrict in Adminis-
trator Settings - [System...

bizhub C360/C280/C2205-61
5.12 Communication Settings5
5.12.3 URL Notification Setting (FTP/SMB/WebDAV)
URL Notification
Specify the E-mail address to be notified about the completion of a job.
Reference
-A destination for the User Box in the main unit, FTP, PC (SMB), and WebDAV operation can be specified 
for the destination in URL Notification Setting.
-URL Notification Setting does not function when sending E-mails, Internet faxes or G3 faxes.
[Detail Search]
You can search for E-mail addresses from...

bizhub C360/C280/C2205-62
5.12 Communication Settings5
5.12.4 Communication Method Settings (G3)
You can specify how to send or receive data.
Quick Memory TX
A method used to start sending fax immediately after scanning a page of the original. This method allows 
even originals with many pages to be sent without overflowing memory.
Reference
-If the optional Security Kit SC-507 is installed, and [Security Details] − [Copy Guard] or [Password 
Copy] is set to [Yes] in Administrator Settings, [Quick Memory...

bizhub C360/C280/C2205-63
5.12 Communication Settings5
Polling RX - Normal
A function available on the receivers side to request a sender to send set documents or documents to be 
transmitted through polling reservation in the senders machine. This is convenient when communication 
costs are to be borne by the receiver.
Select [Normal] and select the recipient.
Polling RX - Bulletin
A function available on the receivers side to request a sender to send documents set in the senders bulletin 
board.
To...

bizhub C360/C280/C2205-64
5.12 Communication Settings5
Reference
-You can enter up to 9-digit number for the bulletin board number.
Timer transmission (Timer TX)
Specify the sending time. Transmitting faxes in discount telephone rate hours such as late at night or early in 
the morning will reduce the cost. Use the keypad to specify the communication starting time.
Reference
-It is specified in hours and minutes.
-You cannot specify the date.
Password transmission (Password TX)
This function sends...

bizhub C360/C280/C2205-65
5.12 Communication Settings5
Polling TX - Normal
Used to save documents to be transmitted through reserved polling transmission based on a receivers in-
struction.
Select [Normal] when scanning originals to save data in the Polling TX User Box.
dReference
For details on deleting or checking documents in the Polling TX User Box, refer to the [Users Guide Box Op-
erations].
Reference
-When user authentication is enabled, the user cannot perform polling transmission if the user is...

bizhub C360/C280/C2205-66
5.12 Communication Settings5
Reference
-For the bulletin board number, enter the box number between 1 to 999999999 of the Bulletin Board 
User Box that has been registered in advance.
-Only one document can be saved in a single bulletin board.
-You can create up to 10 bulletin boards for this machine.
dReference
For details on deleting or checking documents in the Bulletin Board User Box, refer to the [Users Guide Box 
Operations].
F-Code transmission (F-Code TX)
This function...

bizhub C360/C280/C2205-67
5.12 Communication Settings5
5.12.7 Fax Header Settings (G3/IP/I-FAX)
Specify whether to attach sender information (TTI) when sending documents. Select the sender name from 
the sender name list.
Reference
-To register the contents of the header information to be added to the original, use [Header Information] 
in Administrator Settings. For details, refer to page 10-14.
-To register how the header information will be added, use [Header/Footer Position] in Administrator...

bizhub C360/C280/C2205-68
5.13 Redialing (G3/IP)5
5.13 Redialing (G3/IP)
Redialing refers to the operation to dial to the same destination again.
If a fax cannot be sent for example because the recipients line is busy, the machine redials after a specified 
period has elapsed.
5.13.1 Auto redialing
If a fax cannot be sent, for example because the recipients line is busy, the machine automatically redials 
the same destination for the number of redials specified in Line Parameter Setting.
The transmission...

6Receiving (G3/IP/I-FAX)
Downloaded From ManualsPrinter.com Manuals