Konica Minolta bizhub C360 User Manual

bizhub C360/C280/C22010-15
10.4 Administrator Settings (G3)10
10.4.7 Fax Settings - Header/Footer Position
Specify the position on a page where sender information and fax ID that are printed on received documents.Item Description
[Sender] Allows you to register more than one sender name that is to be printed on 
documents received by the recipient as sender information. Enter a text us-
ing up to 30 characters.
• To register a new sender, press [New].
• Possible to specify up to 20 types of views for...

bizhub C360/C280/C22010-16
10.4 Administrator Settings (G3)10
The following indicates where to print sender information or reception information.
-[Inside Body Text]: The sender or receiving information is added so that it is overlaid on part of the orig-
inal image before the fax is being sent.
-[Outside Body Text]: The sender or receiving information is added to the outside of the original image 
area before the fax is being sent.
-[OFF]: The sender or receiving information is not added.
The following...

bizhub C360/C280/C22010-17
10.4 Administrator Settings (G3)10
-[OFF]: The sender name, fax ID of this machine, transmission start date and time, transmission number, 
and the number of pages are added as sender information.
10.4.8 Fax Settings - Line Parameter Setting
Configure items related to fax transmission and reception.
1/3 page
From : MFP01 987654321 05/25/2006 13:22 #138 P.001/001
Item Description
[Dialing Method] Select one of the dialing methods from PB/10pps/20pps.
[Receive Mode] Select a...

bizhub C360/C280/C22010-18
10.4 Administrator Settings (G3)10
2/3 page
3/3 pageItem Description
[Line Monitor Sound] Set this item to ON to hear the line sound from a speaker during communi-
cation.
Item Description
[Line Monitor Sound Vol.] Set the volume level of the speaker in the range between 0 and 31 (Default: 
16).
Downloaded From ManualsPrinter.com Manuals 

bizhub C360/C280/C22010-19
10.4 Administrator Settings (G3)10
10.4.9 Fax Settings - TX/RX Setting
Configure the handling of files for polling TX operations and printing method for RX operations.
1/3 page
2/3 pageItem Description
[Duplex Print (RX)] If Duplex Print (RX) is set to ON, the original received is printed on both sides 
of the paper.
• If [Print Separate Fax Pages] is set to ON, this key does not appear.
[Letter/Ledger over 
A4/A3]Specify ON to select letter or ledger paper for printing...

bizhub C360/C280/C22010-20
10.4 Administrator Settings (G3)10
3/3 page
3/3 page (If two units of the Fax Kit FK-502 are installed) Item Description
[Tray Selection for RX 
Print]If you want to fix the paper tray used to print received faxes, select the paper 
tray.
The available tray types vary depending on the options that are installed.
[Min. Reduction for RX 
Print]Specify the reduction ratio for received document to Full Size or a value be-
tween 87 and 96%.
• If the reduction ratio for printing is...

bizhub C360/C280/C22010-21
10.4 Administrator Settings (G3)10
10.4.10 Fax Settings - Function Settings
Function ON/OFF Settings
1/2 page
2/2 pageItem Description
[F-Code TX] Specify whether to use F-Code TX.
• F-Code TX provides two methods: confidential transmission and relay 
transmission.
dReference
For details on confidential transmission, refer to page 7-5.
For details on relay transmission, refer to page 7-6.
[Relay RX] Set this item to ON to enable the machine to send received documents as a...

bizhub C360/C280/C22010-22
10.4 Administrator Settings (G3)10
Memory RX Setting
Specify whether to use Memory RX Setting function. To use the function, specify a password for print.
Press [No] to clear the entered setting and then specify a password using the keypad. (up to 8 digits)
The following screen is displayed if two units of the Fax Kit FK-502 are installed, and [Individual Receiving 
Line Setup] is set to [ON] in Administrator Settings.
Press [Yes] and then specify a password using the keypad....

bizhub C360/C280/C22010-23
10.4 Administrator Settings (G3)10
Closed Network RX
Specify whether to use the Closed Network RX function. To use the function, specify a password that is used 
for Closed Network RX.
Press [No] to clear the entered setting and then specify a password using the keypad. (up to 4 digits)
Reference
-Closed Network RX is only available when the receiver has password transmission function.
Forward TX Setting
You can forward received documents to a preset recipient. The items that...

bizhub C360/C280/C22010-24
10.4 Administrator Settings (G3)10
If [Confirm Address (Register)] is ON, a screen for entering the fax number again appears after you press [OK]. 
Enter the fax number and then press [OK].
dReference
For details on the Confirm Address function, refer to page 10-21.
Incomplete TX Hold
This function temporarily retains documents failed to be transmitted in the Fax Retransmit User Box even with 
auto-redial due to a communications error or busy signals. To use Incomplete TX Hold...