Konica Minolta bizhub C360 User Manual

bizhub C360/C280/C22010-25
10.4 Administrator Settings (G3)10
PC-Fax RX Settings
Specify whether to use the PC-Fax RX function. To use the function, configure the following items.
If two units of the Fax Kit FK-502 are installed, and [Individual Receiving Line Setup] is set to [ON] in Admin-
istrator Settings, you can select either [Fax Line 1] or [Fax Line 2] to configure settings for each line. For details 
on [Individual Receiving Line Setup], refer to page 10-19.
Reference
-The documents received by...

bizhub C360/C280/C22010-26
10.4 Administrator Settings (G3)10
Reference
-You can also specify the registered group as the destination.
10.4.11 Fax Settings - PBX Connection Setting
Specify the PBX line connection method.
If the PBX connection mode is enabled, specify an access code for an outside line. An access code refers to 
a number used to connect to an outside line, such as a number beginning with a zero (0).
Outside line numbers specified here are dialed, after which fax numbers registered with...

bizhub C360/C280/C22010-27
10.4 Administrator Settings (G3)10
10.4.12 Fax Settings - Report Settings
Specify a way to output reports.
1/3 page
Item Description
[Activity Report] Configure output settings for Activity Report. To output the re-
port, configure the following settings.
[Output Setting] Specify the time when the report is to be output.
[Daily]: Outputs the report every day at a certain time.
[Every 100 Comm.]: Outputs the report for every 100 commu-
nication jobs.
[100/Daily]: Outputs the...

bizhub C360/C280/C22010-28
10.4 Administrator Settings (G3)10
2/3 page
3/3 pageItem Description
[Bulletin TX Report] Configure the output settings for Bulletin TX Report. Specify whether to out-
put the report.
[Relay TX Result Report] Configure the output settings for Relay TX Result Report. Specify whether to 
output the report.
[Relay Request Report] Configure the output settings for Relay Request Report. Specify whether to 
output the report.
[PC-Fax TX Error Report] Configure the output settings for...

bizhub C360/C280/C22010-29
10.4 Administrator Settings (G3)10
10.4.13 Fax Settings - Job Settings List
This function outputs a list of settings related to faxes. Select a desired paper tray, and then press [Start].
Reference
-For an example of output of a list of settings, refer to page 8-12.
10.4.14 Fax Settings - Multi Line Settings
If two units of the Fax Kit FK-502 are installed, configure settings for the second line.
Line Parameter Setting
Item Description
[Dialing Method] Select one of the dialing...

bizhub C360/C280/C22010-30
10.4 Administrator Settings (G3)10
Function Settings
Multi Line Settings
Select the communication method for the extension line from three options: TX and RX, RX Only, and TX Only. [Number of RX Call 
Rings]Set the number of incoming call rings in the range between 0 and 15 (Default: 
2).
[Line Monitor Sound] Set this item to ON to hear the line sound from a speaker during communi-
cation through the extension line. Item Description
Item Description
[PC-FAX TX Setting] Specify...

bizhub C360/C280/C22010-31
10.4 Administrator Settings (G3)10
Sender Fax No.
Register a sender fax number for the extension line. The registered fax number is printed as the senders in-
formation on the document received by the recipient. Enter a sender fax number using 0-9, *, #, [+], and space 
(up to 20 characters).
10.4.15 Security Settings - Security Details
Manual Destination Input
dReference
For the setting procedure, refer to page 10-11.
Restrict Fax TX
Select whether to restrict fax...

bizhub C360/C280/C22010-32
10.4 Administrator Settings (G3)10
Initialize
dReference
For the setting procedure, refer to page 10-11.
Job History Thumbnail Display
dReference
For the setting procedure, refer to page 10-11.
Copy Guard
dReference
For the setting procedure, refer to page 10-11.
Password Copy
dReference
For the setting procedure, refer to page 10-11.
Downloaded From ManualsPrinter.com Manuals 

bizhub C360/C280/C22010-33
10.5 Administrator Settings (IP/I-FAX)10
10.5 Administrator Settings (IP/I-FAX)
This section describes administrator settings that are configured for Internet Fax and IP Address Fax.
10.5.1 System Settings - Power Save Setting - Enter Power Save Mode
dReference
For the setting procedure, refer to page 10-13.
10.5.2 System Settings - Output Setting - Print/Fax Output Setting - Fax
dReference
For the setting procedure, refer to page 10-13.
10.5.3 System Settings - Restrict User...

bizhub C360/C280/C22010-34
10.5 Administrator Settings (IP/I-FAX)10
10.5.7 Fax Settings - Header/Footer Position
Reference
-For IP Address Fax in the color mode, reception information is not available for [Outside Body Text]. 
Even if [Outside Body Text] is selected, sender information is added to the inside of the original.
dReference
For the setting procedure, refer to page 10-15.
10.5.8 Fax Settings - Line Parameter Setting (IP)
Number of Redials
dReference
For the setting procedure, refer to page...