Konica Minolta bizhub C360 User Manual

bizhub C360/C280/C22010-5
10.2 Menu tree in Administrator mode10
10.2.2 [Fax Settings]
First level Second level Third level Fourth level
1 [Header Infor-
mation] (p. 10-14)[Sender]
[Sender Fax No.]
2 [Header/Footer 
Position] 
(p. 10-15)[Header Position]
[Print Receivers Name](Not displayed for North American or 
Hong Kong models. )
[Footer Position]
3 [Line Parameter 
Setting] (p. 10-17)1/3 [Dialing Method]
[Receive Mode]
[Number of RX Call Rings]
[Number of Redials]
[Redial Interval]
2/3 [Line Monitor...

bizhub C360/C280/C22010-6
10.2 Menu tree in Administrator mode10
5 [Function Set-
tings]1 [Function 
ON/OFF Setting] 
(p. 10-21)1/2 [F-Code TX]
[Relay RX]
[Relay Printing]
[Destination Check Display 
Function]
2/2 [Confirm Address (TX)]
[Confirm Address (Register)]
3 [Memory RX Setting] (p. 10-22)
4 [Closed Network RX] (p. 10-23)
5 [Forward TX 
Setting] (p. 10-23)[Fax Line 1]
*2
[Fax Line 2]*2
7 [Incomplete TX Hold] (p. 10-24)
8 [PC-Fax RX Set-
ting] (p. 10-25)[Fax Line 1]
*2
[Fax Line 2]*2
9 [TSI User...

bizhub C360/C280/C22010-7
10.2 Menu tree in Administrator mode10
Reference
-The item with *1 mark is displayed if two units of the Fax Kit FK-502 are installed.
-The item with *2 mark is displayed if two units of the Fax Kit FK-502 are installed, and [Individual Re-
ceiving Line Setup] is set to [ON] in Administrator Settings. For details on [Individual Receiving Line Set-
up], refer to page 10-19.
10.2.3 [Security Settings]
9 [Multi Line Set-
tings] (p. 10-29)1 [Line Parameter 
Setting] (p....

bizhub C360/C280/C22010-8
10.3 Administrator Settings (E-mail/Box/SMB/FTP/WebDAV)10
10.3 Administrator Settings (E-mail/Box/SMB/FTP/WebDAV)
This section describes administrator settings that are configured for E-mail Transmission, Save in User Box, 
SMB, FTP and WebDAV.
10.3.1 Displaying the Administrator Settings screen
To display the Administrator Settings screen, press the Utility/Counter key on the control panel and then 
select [Administrator Settings] from the Utility menu that appears. Enter the...

bizhub C360/C280/C22010-9
10.3 Administrator Settings (E-mail/Box/SMB/FTP/WebDAV)10
Restrict Operation
10.3.3 System Settings - Reset Setting - Job Reset - Next Job - Reset Data After 
Job
Specify whether to reset settings (such as scan setting) configured for sending faxes after sending jobs.
-[Reset All]: Resets all settings.
-[Reset Destination Only]: Resets only the destination settings.
-[Confirm with User]: Displays a message to confirm that you want to clear the settings. Item Description...

bizhub C360/C280/C22010-10
10.3 Administrator Settings (E-mail/Box/SMB/FTP/WebDAV)10
10.3.4 System Settings - Stamp Settings - Header/Footer Settings
Configure the settings for the header/footer to be inserted on all pages. You can use the settings for the head-
er/footer configured here for faxing, scanning and printing.
In the Header/Footer Setting window, press [New]. This brings up a screen that allows you to enter a new 
header/footer.
Item Description
[Name] Use the touch panel to enter the name to...

bizhub C360/C280/C22010-11
10.3 Administrator Settings (E-mail/Box/SMB/FTP/WebDAV)10
10.3.5 System Settings - Advanced Preview Setting − Original direction setting dis-
play
When sending a fax using the advanced preview, specify whether to display the screen for selecting the di-
rection of the original after pressing Proof Copy.
10.3.6 Security Settings - Security Details
1/4 page
Item Description
[Manual Destination Input] Specify whether to allow manual destination input.
If necessary, you can allow...

bizhub C360/C280/C22010-12
10.3 Administrator Settings (E-mail/Box/SMB/FTP/WebDAV)10
2/4 page
3/4 pageItem Description
[Hide Personal Information] Specify whether to include destinations in Job History on the 
Job List screen.
If [ON] is selected, destinations are not displayed.
[Display Activity Log] Specify whether to display fax transmission and reception 
history. If [OFF] is selected, the history is not displayed.
Item Description
[Initialize] Allows you to select an object of which the data you...

bizhub C360/C280/C22010-13
10.4 Administrator Settings (G3)10
10.4 Administrator Settings (G3)
This section describes administrator settings that are configured for G3 Fax TX. The descriptions in this sec-
tion also apply to Network Fax.
10.4.1 System Settings - Power Save Settings - Enter Power Save Mode
Select the condition on which the machine shifts to the power save mode.
-[Normal]: When a fax is received during the power save mode, the fax job is printed. After a predeter-
mined time has elapsed,...

bizhub C360/C280/C22010-14
10.4 Administrator Settings (G3)10
10.4.3 System Settings - Restrict User Access
Restrict Access to Job Settings - Registering and Changing Addresses
dReference
For the setting procedure, refer to page 10-8.
Restrict Operation - Restrict Broadcasting
dReference
For the setting procedure, refer to page 10-9.
10.4.4 System Settings - Stamp Settings - Fax TX Settings
Specify whether to reset stamp settings configured for scanning faxes when sending faxes.
-[Cancel]: Each page of...