Konica Minolta bizhub C25 User Manual

UTILITY Menu 2-20
dManufacturers default settings appear in bold.
[QUALITY PRIORITY] Settings[STD/TEXT] / [FINE/TEXT] / 
[S-FINE/TEXT] / [STD/PHOTO] / 
[FINE/PHOTO] / [S-FINE/PHOTO]
Select the default scanning resolution (fax doc-
ument quality).
-[STD/TEXT]: Select this setting for docu-
ments containing handwriting or for com-
puter printouts.
-[FINE/TEXT]: Select this setting for docu-
ments containing small print.
-[S-FINE/TEXT]: Select this setting for docu-
ments containing small print, such as...

UTILITY Menu2-21
[DEFAULT TX] Settings[MEMORY TX] / [DIRECT TX]
Select the desired method for sending docu-
ments.
-[MEMORY TX]: With this method, the fax 
transmission starts after the entire docu-
ment is scanned and stored in the memory. 
The total number of pages is automatically 
printed with the page number in the header. 
However, the memory may become full if 
there are many pages in the document or if 
the data is large due to the fine image qual-
ity (resolution).
-[DIRECT TX]: With this...

UTILITY Menu 2-22
FAX RX OPERATION Menu
Specify settings related to fax receptions by selecting [FAX RX OPERATION] 
in the [UTILITY] menu.
FAX RX OPERATION MEMORY RX MODE
NO. of RINGS
REDUCTION RX
RX PRINT
RX MODE
FORWARD
FOOTER
SELECT TRAY
DUPLEX PRINT
Downloaded From ManualsPrinter.com Manuals 

UTILITY Menu2-23
dManufacturers default settings appear in bold.
[MEMORY RX MODE] Settings[OFF] / [ON]
Select whether to allow (ON) memory reception 
or not (OFF). Select [ON] not to print when 
receiving confidential faxes or when no one is 
around, for example, at night. The received 
documents can be stored in memory and 
printed at a specified time or when memory 
reception is turned off (this function is set to 
[OFF]).
A password can be set to specify the starting 
time or ending time of memory...

UTILITY Menu 2-24
[RX PRINT] Settings[MEMORY RX] / [PRINT RX]
Select whether the fax is printed only after all 
document pages have been received or print-
ing begins as soon as the first page of the doc-
ument is received.
-[MEMORY RX]: Printing begins after all 
pages have been received.
-[PRINT RX]: Printing begins after the first 
page has been received.
[RX MODE] Settings[AUTO RX] / [MANUAL RX]
Select whether the reception mode is set to 
automatic reception or manual reception.
-[AUTO RX]:...

UTILITY Menu2-25
[FOOTER] Settings[OFF] / [ON]
Select whether or not the reception information 
(date received, number of pages, etc.) is 
printed at the bottom of each received docu-
ment.
[SELECT TRAY] Settings [TRAY1]: [DISABLE] / [ENABLE]
[TRAY2]: [DISABLE] / [ENABLE]
[TRAY3]: [DISABLE] / [ENABLE]
Select which paper tray can be used to supply 
paper when printing received documents or 
transmission reports. A paper tray that cannot 
be used for supplying paper can also be speci-
fied.
dIf an optional...

UTILITY Menu 2-26
REPORTING Menu
Specify report settings by selecting [REPORTING] in the [UTILITY] menu.
dManufacturers default settings appear in bold.
REPORTING ACTIVITY REPORT
TX RESULT REPORT
RX RESULT REPORT
[ACTIVITY REPORT] Settings [OFF] / [ON]
After every 60 transmissions/receptions, a 
report can be printed to show the results of the 
transmissions/receptions. Select whether the 
report is printed automatically when the 60th 
transmission/reception is reached.
[TX RESULT REPORT] Settings [ON] /...

UTILITY Menu2-27
[RX RESULT REPORT] Settings [ON] / [ON(ERROR)] / [OFF]
Select whether the report showing the result of 
a reception is printed automatically after the 
reception is finished.
-[ON]: Prints the report after each reception.
-[ON(ERROR)]: Prints the report after a 
reception only if an error occurred.
-[OFF]: Does not print the report after each 
reception, even if an error has occurred.
Downloaded From ManualsPrinter.com Manuals 

Specifying Settings in UTILITY Menu 2-28
Specifying Settings in UTILITY Menu
General Procedure for Specifying Settings in UTILITY 
Menu
1Press the + or , key to select [UTILITY], and then press the Select key.
2Press the + or , key to select the desired menu, and then press the 
Select key to display the selected menu.
dRefer to the menu configuration on page 2-9 to display the 
desired menu.
3To select a setting, press the +, ,, * or ) key.
To enter a setting, use the keypad to type in the number....

Specifying Settings in UTILITY Menu2-29 Setting Up the Memory RX Mode
1Press the + or , key to select [UTILITY], and then press the Select key.
2Press the + or , key to select [FAX RX OPERATION], and then press the 
Select key.
3Check that [MEMORY RX MODE] is selected, and then press the Select 
key.
4Using the + or , keys, select [ON], and then press the Select key.
5Use the keypad to type in the time when memory reception mode begins, 
and then press the Select key.
The ending time input box appears....