Konica Minolta bizhub C20 User Manual

							Configuration Menu Overview 47
Manufacturer’s default settings appear in bold.
ADMINISTRATOR NO.Specify the new administrator access 
code.
REMOTE MONITORSettingOFF / ON
Select whether or not setting remote 
monitor.
If 
ON is selected, technical support can 
access the menu mode.
If 
OFF is selected, technical support 
cannot access the menu mode.
This setting is for technical 
support uses. Change the setting 
only when it is necessary.
NETWORK 
SETTINGTCP/IPSettingDISABLE / ENABLE
Select the setting for connecting to this 
machine through a network.
IP ADDR. SET-
TINGSettingAUTO / SPECIFY
Set the IP address of this printer on the 
network.
If 
AUTO is selected, the IP address will 
be assigned automatically.
If 
SPECIFY is selected, manually spec-
ify settings for 
IP ADDRESS, SUB-
NET MASK
 and GATEWAY.
DNS DNS 
AUTO 
SET-
TINGSettingDISABLE / ENABLE
Select whether or not the DNS server 
address is automatically assigned by 
the DHCP server.
SPEC-
IFYSpecify the DNS server address (up to 
three addresses).
The default setting is “0.0.0.0”.
DHCPSettingDISABLE / ENABLE
If there is a DHCP server on the net-
work, specify whether the IP address 
and other network information is auto-
matically assigned by the DHCP server.
Downloaded From ManualsPrinter.com Manuals 
						

							Configuration Menu Overview 48
BOOTPSettingDISABLE / ENABLE
If there is a BOOTP server on the net-
work, specify whether the IP address 
and other network information is auto-
matically assigned by the BOOTP 
server.
ARP/PINGSettingDISABLE / ENABLE
Select whether or not the ARP/PING 
command is used when the IP address 
is assigned.
HTTPSettingDISABLE / ENABLE
Select whether or not to enable HTTP.
FTP SERVERSettingDISABLE / ENABLE
Select whether or not to enable the FTP 
server.
FTP TXSettingDISABLE / ENABLE
Select whether or not to enable the FTP 
client.
SMBSettingDISABLE / ENABLE
Select whether or not to enable SMB.
BONJOURSettingDISABLE / ENABLE
Select whether or not to enable Bonjour.
DYNAMIC DNSSettingDISABLE / ENABLE
Select whether or not to enable 
Dynamic DNS.
IPPSettingDISABLE / ENABLE
Select whether or not to enable IPP.
If HTTP is set to DISABLE, IPP 
cannot be set.
RAW 
PORTDIS-
ABLE/
ENABLESettingDISABLE / ENABLE
Select whether or not to enable the raw 
port.
BIDI-
REC-
TIONALSettingDISABLE / ENABLE
Select whether or not to enable raw port 
bidirectional communication.
Downloaded From ManualsPrinter.com Manuals 
						

							Configuration Menu Overview 49
SLPSettingDISABLE / ENABLE
Select whether or not to enable SLP.
SNMPSettingDISABLE / ENABLE
Select whether or not to enable SNMP.
WSD PRINTSettingDISABLE / ENABLE
Select whether or not to enable WSD 
printing.
IPSECSettingDISABLE / ENABLE
Select whether or not to enable IPsec.
IP 
ADDR. 
FILTERACCESS 
PER.SettingDISABLE / ENABLE
Specify access permissions for IP 
address filtering.
ACCESS 
REFUSESettingDISABLE / ENABLE
Specify access blocking for IP address 
filtering.
IPv6 DIS-
ABLE/
ENABLESettingDISABLE / ENABLE
Select whether or not to enable IPv6.
AUTO 
SET-
TINGSettingYES/NO
Select whether or not to enable the IPv6 
auto setting.
LINK 
LOCALDisplays the link-local address.
GLOBAL 
ADDRES
SDisplays the global address.
GATE-
WAY 
ADDRES
SDisplays the gateway address.
NETWARESettingDISABLE / ENABLE
Select whether or not to enable Net-
Ware.
APPLETALKSettingDISABLE / ENABLE
Select whether or not to enable Apple-
Ta l k .
Downloaded From ManualsPrinter.com Manuals 
						

							Configuration Menu Overview 50
SPEED/DUPLEXSettingAUTO / 10BASE FULL / 
10BASE HALF / 
100BASE FULL / 
100BASE HALF / 
1000BASE FULL
Specifies the transmission speed for the 
network and the transmission method 
for bi-directional transmission. 
IEEE802.1XSettingDISABLE / ENABLE
Select whether or not to enable 
IEEE802.1X.
E-MAIL 
SETTINGSMTPSettingDISABLE / ENABLE
Select whether to enable or disable 
e-mail transmission operations for this 
machine.
SENDER NAMESpecify the name of the E-mail sender 
(up to 20 characters) used for network 
scanning.
The default setting is “bizhub_C20”.
E-MAIL ADDRESSSpecify the E-mail address (up to 64 
characters) of the E-mail sender used 
for network scanning.
DEFAULT SUB-
JECTSpecify the subject (up to 20 characters) 
of the E-mail message used for network 
scanning.
The default setting is “from bizhub 
C20”.
SMTP SERVER 
ADDR.Specify the IP address or host name (up 
to 64 characters) for the SMTP server.
The default setting is “0.0.0.0”.
SMTP PORT NO.Setting1 to 65535 (Default: 25)
Specify the port number communicating 
with the SMTP server.
SMTP TIMEOUTSetting30 to 300 sec (Default: 
60 sec)
Select the amount of time (in seconds) 
until the connection with the SMTP 
server times out.
Downloaded From ManualsPrinter.com Manuals 
						

							Configuration Menu Overview 51
TEXT INSERTSettingOFF / ON
Select whether or not the specified text 
is inserted into the E-mail message.
POP 
BEFORE 
SMTPDIS-
ABLE/
ENABLESettingDISABLE / ENABLE
Select whether or not to enable POP 
Before SMTP.
If 
ENABLE is selected, specify the time 
(between 0 and 60 seconds). The 
default setting is 
1sec.
POP3 
SERVER 
ADDR.Specify the host name or IP address for 
the POP3 server used for authentication 
with POP Before SMTP.
The default setting is “0.0.0.0”.
POP3 
PORT 
NO.Setting1 to 65535 (Default: 110)
Specify the port number used for com-
municating with the POP3 server.
POP3 
TIME-
OUTSetting30 to 300 sec (Default: 
30 sec)
Select the amount of time (in seconds) 
until the connection with the POP3 
server times out.
POP3 
ACCOUNTSpecify the user name (up to 63 charac-
ters) used for authentication with POP3 
server.
POP3 
PASS-
WORDSpecify the password (up to 15 charac-
ters) used for authentication with POP3 
server.
SMTP 
AUTH.DIS-
ABLE/
ENABLESettingDISABLE / ENABLE
Select whether or not to enable SMTP 
authentication.
SMTP 
USER-
NAMESpecify the user name (up to 63 charac-
ters) used for SMTP authentication.
SMTP 
PASS-
WORDSpecify the password (up to 15 charac-
ters) used for SMTP authentication.
Downloaded From ManualsPrinter.com Manuals 
						

							Configuration Menu Overview 52
LDAP 
SETTINGDISABLE/ENABLESettingDISABLE / ENABLE
Select whether or not to enable the 
LDAP function.
LDAP SERVER 
ADDR.Specify the address (up to 64 charac-
ters) of the LDAP server.
The default setting is “0.0.0.0”.
LDAP PORT NO.Setting1 to 65535 (Default: 389)
Specify the port number of the LDAP 
server.
SSL SETTINGSettingDISABLE / ENABLE
Select whether or not to enable SSL.
SEARCH BASESpecify the search starting point (up to 
64 characters) in a hierarchical structure 
arranged on the LDAP server.
ATTRIBUTEThe conditions for searches can be 
specified as a name or e-mail address 
(up to 32 characters).
The default setting is “cn”.
SEARCH METHODSettingBEGIN / CONTAIN / END
The specified characters can be 
searched for at the beginning, within or 
at the end.
LDAP TIMEOUTSetting5 to 300 sec (Default: 
60 sec)
Specify the maximum wait time during a 
search.
MAX.SEARCH 
RESULTSSetting5 to 100 (Default: 100)
Specify the maximum number of desti-
nations displayed after a search.
AUTHENTICATIONSettingANONYMOUS / SIMPLE / 
DIGEST-MD5 / 
GSS-SPNEGO
Select the authentication method used 
for logging on to the LDAP server.
LDAP ACCOUNTSpecify the account (up to 64 charac-
ters) used to connect to the LDAP 
server.
Downloaded From ManualsPrinter.com Manuals 
						

							Configuration Menu Overview 53
LDAP PASSWORDSpecify the password (up to 32 charac-
ters) used to connect to the LDAP 
server.
DOMAIN NAMESpecify the domain name (up to 64 
characters) used to connect to the 
LDAP server.
CAMERA DIRECTSettingDISABLE / ENABLE
USB SETTING
SettingWindows / Mac
Select the operating system of the PC to 
which this machine is connected with a 
USB cable.
COMM. 
SETTINGTONE/PULSESettingTONE / PULSE
Select the dialing system. If this param-
eter is not correctly set to the type of 
dialing system used, faxes cannot be 
sent and received.
Select the correct setting after checking 
which type of dialing system is used by 
your telephone line.
If PTT SETTING in the USER 
SETTING
 menu is set to 
U.S.A, CANADA or NEW 
ZEALAND
, the settings cannot 
be changed.
LINE MONITORSettingOFF / LOW / HIGH
Select the volume of the monitoring 
sound of the transmission signal.
PSTN/PBXSettingPSTN / PBX
Select whether the connected tele-
phone wiring is a public switched tele-
phone network (PSTN) or a private 
branch exchange (PBX).
For a PBX system, the prefix number 
(outside line access number or exten-
sion number) can be specified.
Downloaded From ManualsPrinter.com Manuals 
						

							Configuration Menu Overview 54
USER 
SETTINGPTT SETTINGSettingARGENTINA / AUSTRA-
LIA
 / AUSTRIA / BEL-
GIUM
 / BRAZIL / 
CANADA / CHINA / 
CZECH / DENMARK / 
EUROPE / FINLAND / 
FRANCE / GERMANY / 
GREECE / HONG KONG / 
HUNGARY / IRELAND / 
ISRAEL / ITALY / 
JAPAN / KOREA / 
MALAYSIA / MEXICO / 
THE NETHERLANDS / 
NEW ZEALAND / NORWAY 
/ 
PHILIPPINES / 
POLAND / PORTUGAL / 
RUSSIA / SAUDI ARA-
BIA
 / SINGAPORE / 
SLOVAKIA / SOUTH 
AFRICA
 / SPAIN / SWE-
DEN
 / SWITZERLAND / 
TAIWAN / TURKEY / 
U.S.A / UNITED KING-
DOM
 / VIETNAM
Select the country where this machine 
is installed.
DATE&TIMESettingTIME: 00:00-23:59 
(Default: 
00:00 )
DATE: ’07/01/01-’32/12/31 
(Default: ’
07/01/01)
ZONE: 
GMT+12:00-GMT-12:00 (in 
30-minute intervals) 
(Default: 
GMT+00:00)
Use the keypad to specify the current 
date, time and time zone.
DATE FORMATSettingMM/DD/YY / DD/MM/YY / 
YY/MM/DD
Select the display format for reports and 
lists.
Downloaded From ManualsPrinter.com Manuals 
						

							Configuration Menu Overview 55
PRESET ZOOMSettingINCH / METRIC
Select the measurement units for the 
preset zoom ratios.
The default setting is 
INCH for USA and 
Canada, and 
METRIC for other coun-
tries.
USER FAX NUM-
BEREnter your fax number. A maximum of 
20 characters (consisting of numbers, 
spaces, + and -) can be entered. The 
specified number is printed in the 
header of outgoing faxes. The default 
setting is blank.
USER NAMEEnter your name. A maximum of 32 
characters can be entered. The speci-
fied name is printed in the header of 
outgoing faxes. The default setting is 
blank.
AUTO 
REDIALNUMBER OF 
REDIALSetting1 to 10 (Default: depends 
on 
PTT SETTING)
Specify the number of times a redial is 
attempted if there is no answer, for 
example, when the line is busy.
INTERVALSetting2 to 99 min (Default: 
depends on 
PTT SET-
TING
)
Specify the interval between redial 
attempts.
SUP-
PLIES 
REPLACETRANSFER BELTReplace the counter when the transfer 
belt unit is replaced with new one.
FUSER UNITReplace the counter when the fuser unit 
is replaced with new one.
TRANSFER 
ROLLERReplace the counter when the transfer 
roller is replaced with new one.
Downloaded From ManualsPrinter.com Manuals 
						

							Configuration Menu Overview 56
COPY SETTING Menu
Manufacturer’s default settings appear in bold.
COPY SETTING PAPER PRIORITY
QUALITY PRIORITY
DENSITY PRIORITY
DENSITY LEVEL AUTO
MANUAL
OUTPUT PRIORITY
4IN1 COPY ORDER
DUPLEX COPY
PAPER PRIOR-
ITYSettingTRAY1 / TRAY2 / TRAY3
Specify the paper tray that is normally used.
If an optional lower feeder unit is not installed, 
TRAY3 does not appear.
QUALITY PRI-
ORITYSettingMIX , TEXT , PHOTO , FINE/MIX , 
FINE/TEXT , FINE/PHOTO
Select the type of document being copied.
If 
MIX or FINE/MIX is selected, select either AUTO 
ON
 or AUTO OFF for the auto segmentation (The den-
sity is darkened for text.).
Downloaded From ManualsPrinter.com Manuals