Konica Minolta bizhub C20 User Manual

							Loading Media 127
4Load the paper face up in the 
tray.
Do not load above the  
mark. Up to 500 sheets 
(80 g/m2 [22 lb]) of plain 
paper can be loaded into 
the tray at one time.
5Slide the media guides against 
the edges of the paper.
Downloaded From ManualsPrinter.com Manuals 
						

							Loading Media 128
6Close Tray 3.
Downloaded From ManualsPrinter.com Manuals 
						

							About Duplex Printing 129
About Duplex Printing
Duplex (double-sided) printing can be done with this printer, which has the 
duplex unit built in as a standard. If the paper has low opacity (high translu-
cency), then the printed data from one side of the page will show through to 
the other side. Check your application for margin information. For best 
results, print a small quantity to make sure the opacity is acceptable.
Note
Only plain paper, 60–90 g/m2 (16–24 lb bond) can be autoduplexed. See 
“Specifications” on page 106.
Duplexing envelopes, labels, letterheads, postcards, thick stock, glossy 
media or transparencies is not supported.
How do I autoduplex?
Check your application to determine how to set your margins for duplex 
(double-sided) printing.
The following Binding Position settings are available.
If “Short Edge (Top)” is selected, the pages will be laid out 
to flip at the top.
If “Long Edge (Left)” is selected, the pages will be laid out 
to flip at the side.
1
3
1
21
111
12
3
Downloaded From ManualsPrinter.com Manuals 
						

							About Duplex Printing 130
In addition, if “Combination” has been set to “Booklet”, autoduplex printing is 
performed.
The following Order settings are available when “Booklet” is selected.
1Load plain paper into the tray.
2From the printer driver, specify duplex (double-sided) printing (Layout tab 
in Windows).
3Click OK.
With autoduplexing, the back side is printed first, and then the front 
side is printed.If “Left Binding” is selected, the pages can be folded as a 
left-bound booklet.
If “Right Binding” is selected, the pages can be folded as a 
right-bound booklet.
1
12
3
3
3
1 12
Downloaded From ManualsPrinter.com Manuals 
						

							Output Tray 131
Output Tray
All media is fed out facing down into the output tray on the left side of the 
machine. This tray has a capacity of approximately 250 sheets (A4/Letter) of 
80 g/m
2 paper.
If the media is stacked too high in the output tray, your machine may 
experience media misfeeds, excessive media curl, or static buildup. 
Remove transparencies as soon as possible from the output tray to 
avoid static buildup
The output tray can be pulled out to 
be extended. Adjust the output tray 
according to the size of paper to be 
printed on.
Downloaded From ManualsPrinter.com Manuals 
						

							Media Storage 132
Media Storage
„Keep media on a flat, level surface in its original wrapper until it is time to
load it.
Media that has been stored for a long time out of its packaging may dry up 
too much and cause misfeeding.
„If media has been removed from its wrapper, place it in its original pack-
aging and store in a cool, dark place on a level surface.
„Avoid moisture, excessive humidity, direct sunlight, excessive heat (above 
35°C [95°F]), and dust 
„Avoid leaning against other objects or placing it in an upright position.
Before using stored media, do a trial print and check print quality. 
Downloaded From ManualsPrinter.com Manuals 
						

							Original Media 133
Original Media
Specifications
Documents that can be placed on the original glass
The following types of documents can be placed on the original glass.
Observe the following precautions when placing a document on the original 
glass.
„Do not place objects weighing more than 3 kg (6.6 lb) on the original 
glass; otherwise the glass may be damaged.
„Do not press down extremely hard on a book spread on the original glass; 
otherwise the original glass may be damaged.
Documents that can be loaded into the ADF
The following types of documents can be loaded into the ADF.
Do not load the following types of documents into the ADF.
„Documents containing pages of different sizes
„Wrinkled, folded, curled, or torn documents
„Highly translucent or transparent documents, such as overhead transpar-
encies or diazo photosensitive paper
„Coated documents such as carbon-backed paper
„Documents printed on paper thicker than 128 g/m² (34 lb)
„Documents with pages bound together with paper clips or staples
„Documents that are bound in a book or booklet
„Documents with pages bound together with glue Document type Sheets or books
Maximum document size Legal
Maximum weight 3 kg (6.6 lb)
Document media type / 
WeightPlain paper / 50 to 128 g/m² (13 to 34 lb)
Maximum document size Legal
Media capacity
50 sheets (media weight: 80 g/m
2)
Downloaded From ManualsPrinter.com Manuals 
						

							Original Media 134
„Documents with pages that have had cutouts removed or are cutouts
„Label sheets
„Offset printing masters
„Documents with binder holes
Downloaded From ManualsPrinter.com Manuals 
						

							Loading a Document to be Copied 135
Loading a Document to be Copied
Placing a document on the original glass
1Lift to open the ADF cover.
2Position the document on the 
original glass.
Align the document with 
the arrow on the left side 
toward the rear of the 
machine.
Document
Downloaded From ManualsPrinter.com Manuals 
						

							Loading a Document to be Copied 136
3Gently close the ADF cover.
Loading a document into the ADF
1Put the document into the ADF 
document feed tray face up.
Before loading a docu-
ment into the ADF, check 
that no document pages 
remain on the original 
glass.
Load the document 
pages so that the top of 
the document is toward 
the back or the right side 
of the machine.
2Adjust the document guides to 
the document size.
For details on copying the loaded document, refer to “Using the 
Copier” on page 153. For details on scanning, refer to “Using the 
Scanner” on page 167.
Document
Downloaded From ManualsPrinter.com Manuals