Konica Minolta bizhub C20 User Manual

							Making Basic Copies 157
Each press of the + or , key changes the zoom ratio by 1%.
A setting between 25% and 400% can be specified.
Selecting the Media Tray
If the optional lower feeder unit is not installed, the TRAY3 does not 
appear.
1In the main screen (Copy mode), press the + or , key to select the cur-
rent media tray setting, and then press the Select key.
2Press the + or , key to select the desired media tray, and then press the 
Select key.
If no paper is loaded, EMPTY appears to the right of the media 
type.
Downloaded From ManualsPrinter.com Manuals 
						

							Making Advanced Copies 158
Making Advanced Copies
This section contains descriptions on setting 2in1/4in1 copying, ID card copy-
ing, repeat copying, poster copying, duplex (double-sided) copying and col-
lated (Sort) copying.
ID card copying, repeat copying or poster copying cannot be set at the 
same time that 2in1/4in1 copying, duplex (double-sided) copying or 
collated (Sort) copying is set.
Setting 2in1/4in1 Copying
If 2in1 copying is set, two document pages can be copied together onto a sin-
gle page. If 4in1 copying is set, four document pages can be copied together 
onto a single page.
2in1/4in1 Copying From the ADF
1In the main screen (Copy mode), press the + or , key to select the cur-
rent page layout setting, and then press the Select key.
2Press the + or , key to select 2in1 or 4in1, and then press the Select 
key.
The zoom ratio is automatically set according to the specified media size. 
Change the zoom ratio if necessary.
In order to perform duplex (double-sided) copying or collated (Sort) 
copying with 2in1/4in1 copying, specify the necessary settings 
before starting the copy operation. For details, refer to “Setting 
Duplex (Double-Sided) Copying” on page 163 and “Setting Col-
lated (Sort) Copying” on page 165.
2in1/4in1 copying cannot be set if the ADF is open.
If the zoom ratio is less than 50% with 2in1 copying set and enve-
lopes selected as the media type, the zoom ratio will be set to 
50%.
2in1/4in1 Copying From the Original Glass
1In the main screen (Copy mode), press the + or , key to select the cur-
rent page layout setting, and then press the Select key.
2Press the + or , key to select 2in1 or 4in1, and then press the Select 
key.
The zoom ratio is automatically set according to the specified media size. 
Change the zoom ratio if necessary.
Downloaded From ManualsPrinter.com Manuals 
						

							Making Advanced Copies 159
3Position the first page of the document on the original glass.
For details on positioning the document on the original glass, refer 
to “Placing a document on the original glass” on page 135.
4To print color copies, press the Start-Color key. To print monochrome 
copies, press the Start-B&W key.
Scanning of the document begins.
In order to perform duplex (double-sided) copying or collated (Sort) 
copying with 2in1/4in1 copying, specify the necessary settings 
before performing step 4. For details, refer to “Setting Duplex 
(Double-Sided) Copying” on page 163 and “Setting Collated (Sort) 
Copying” on page 165.
5When NEXT PAGE? appears in the message window, place the second 
document page on the original glass, and then press the Select key.
6Repeat step 5 until all document pages have been scanned.
If 
2in1 is set, printing automatically begins after two document pages 
(four document pages if duplex (double-sided) copying was set) have 
been scanned. If 
4in1 is set, printing automatically begins after four doc-
ument pages (eight document pages if duplex (double-sided) copying was 
set) have been scanned.
7After all document pages have been scanned, press the Start-Color key 
or the Start-B&W key to begin printing the remaining pages.
Setting a Copy Function
ID card copying, repeat copying and poster copying can be set.
If a copy function other than NORMAL COPY has been set, 2in1/4in1 
copying, collated (Sort) copying and duplex (double-sided) copying 
cannot be set. In addition, the zoom ratio is automatically set (and 
cannot be changed).
ID card copying, repeat copying and poster copying can only be per-
formed with the original glass. Position the document pages to be 
scanned so that they are aligned in the upper-left corner of the original 
glass. Since the image is printed 4 mm from the top and left side, 
adjust the position of the document as necessary. For details on posi-
tioning the document on the original glass, refer to “Placing a docu-
ment on the original glass” on page 135.
Downloaded From ManualsPrinter.com Manuals 
						

							Making Advanced Copies 160
ID Card Copying
With ID card copying, the back and front of a document, such as a certificate, 
are copied at full size on a single sheet of paper.
The paper sizes that are available for ID card copying are A4, Let-
ter and Legal.
1Position the document on the original glass.
For details on positioning the document on the original glass, refer 
to “Placing a document on the original glass” on page 135.
2In the main screen (Copy mode), press the + or , key to select the cur-
rent copy function setting, and then press the Select key.
3Press the + or , key to select ID CARD COPY, and then press the 
Select key.
4To print color copies, press the Start-Color key. To print monochrome 
copies, press the Start-B&W key.
Scanning of the document begins.
5When NEXT PAGE? appears, position the back side of the document at 
the same location as the front side, and then press the Select key.
After the back side has been scanned, printing automatically begins.
A
B
front side back side
Downloaded From ManualsPrinter.com Manuals 
						

							Making Advanced Copies 161
To print only the front sides that were scanned first, press the 
Start-Color key or the Start-B&W key in step 5.
Repeat Copying
With repeat copying, small documents, such as memos, are tiled and printed 
on a single page.
1Position the document on the original glass.
For details on positioning the document on the original glass, refer 
to “Placing a document on the original glass” on page 135.
2In the main screen (Copy mode), press the + or , key to select the cur-
rent copy function setting, and then press the Select key.
3Press the + or , key to select REPEAT COPY, and then press the 
Select key.
4When the How to Repeat Copy screen appears, check the settings, and 
then press the Select key.
5To print color copies, press the Start-Color key. To print monochrome 
copies, press the Start-B&W key.
6Use the keypad to type in the document length, and then press the Select 
key.
To change the document size, press the Back key to delete the 
current size, and then use the keypad to specify the desired size.
7Use the keypad to type in the document width, and then press the Select 
key.
After the document has been scanned, printing automatically begins.
To change the document size, press the Back key to delete the 
current size, and then use the keypad to specify the desired size.
Downloaded From ManualsPrinter.com Manuals 
						

							Making Advanced Copies 162
Poster Copying
With poster copying, the length and width of the scanned document are each 
enlarged 200%, and printed on four pages.
If the scanned image does not fit on the size of paper that is used, 
there may be margins on the sides of the image or the image may not 
fit in the paper.
1Position the document on the original glass.
For details on positioning the document on the original glass, refer 
to “Placing a document on the original glass” on page 135.
2In the main screen (Copy mode), press the + or , key to select the cur-
rent copy function setting, and then press the Select key.
3Press the + or , key to select POSTER COPY, and then press the 
Select key.
4To print color copies, press the Start-Color key. To print monochrome 
copies, press the Start-B&W key.
After the document has been scanned, printing automatically begins.
Downloaded From ManualsPrinter.com Manuals 
						

							Making Advanced Copies 163 Setting Duplex (Double-Sided) Copying
Duplex (Double-Sided) Copying From the ADF
With duplex (double-sided) copying, two single-sided document pages can be 
scanned with the ADF and printed onto a single sheet of paper.
1In the main screen (Copy mode), press the + or , key to select the cur-
rent simplex/duplex (single-sided/double-sided) setting, and then press 
the Select key.
2Press the + or , key to select 1-SIDE→2-SIDE, and then press the 
Select key.
3Press the + or , key to select LONG EDGE or SHORT EDGE, and then 
press the Select key.
The main screen (Copy mode) appears again.
When LONG EDGE or SHORT EDGE is selected, duplex (Dou-
ble-Sided) copying is performed as described below.
If LONG EDGE is selected, the pages will be laid out to flip 
at the sides.
If SHORT EDGE is selected, the pages will be laid out to flip 
at the top.
111
12
3
1
3
1
21
Downloaded From ManualsPrinter.com Manuals 
						

							Making Advanced Copies 164
Duplex (Double-Sided) Copying From the Original Glass
Duplex (double-sided) copying can also be performed by placing the docu-
ment on the original glass.
1Position the document on the 
original glass.
For details on positioning 
the document on the orig-
inal glass, refer to “Plac-
ing a document on the 
original glass” on page 
135.
2In the main screen (Copy mode), press the + or , key to select the cur-
rent simplex/duplex (single-sided/double-sided) setting, and then press 
the Select key.
3Press the + or , key to select 1-SIDE→2-SIDE, and then press the 
Select key.
4Press the + or , key to select LONG EDGE or SHORT EDGE, and then 
press the Select key.
For details on LONG EDGE and SHORT EDGE, refer to “Duplex 
(Double-Sided) Copying From the ADF” on page 163.
5To print color copies, press the Start-Color key. To print monochrome 
copies, press the Start-B&W key.
Scanning of the document begins.
6When NEXT PAGE? appears in the message window, place the second 
document page on the original glass, and then press the Select key.
After the second page (back side) is scanned, printing begins automati-
cally.
Downloaded From ManualsPrinter.com Manuals 
						

							Making Advanced Copies 165
Duplex (Double-Sided) Document Copying
A duplex (double-sided) document can be scanned and printed as either a 
duplex (double-sided) copy or a simplex (single-sided) copy.
Duplex (double-sided) document copying can only be performed from 
the ADF.
1In the main screen (Copy mode), press the + or , key to select the cur-
rent simplex/duplex (single-sided/double-sided) setting, and then press 
the Select key.
2Press the + or , key to select 2-SIDE→2-SIDE for a duplex (dou-
ble-sided) copy or 
2-SIDE→1-SIDE for a simplex (single-sided) copy, 
and then press the Select key.
3Press the + or , key to select LONG EDGE or SHORT EDGE as the 
binding position in the document to be scanned, and then press the 
Select key.
4If 2-SIDE→2-SIDE was selected in step 2, select LONG EDGE or 
SHORT EDGE as the binding position of the duplex (double-sided) copy, 
and then press the Select key.
Setting Collated (Sort) Copying
With collated (Sort) copying, multiple copies of multi-page documents can be 
printed in order and sorted by copy set.
Collated (Sort) Copying From the ADF
1In the main screen (Copy mode), press the + or , key to select the cur-
rent Sort setting, and then press the Select key.
2Press the + or , key to select SORT, and then press the Select key.
The main screen (Copy mode) appears again.
Collated (Sort) Copying From the Original Glass
1Position the document on the original glass.
For details on positioning the document on the original glass, refer 
to “Placing a document on the original glass” on page 135.
2In the main screen (Copy mode), press the + or , key to select the cur-
rent Sort setting, and then press the Select key.
3Press the + or , key to select SORT, and then press the Select key.
Downloaded From ManualsPrinter.com Manuals 
						

							Making Advanced Copies 166
4To print color copies, press the Start-Color key. To print monochrome 
copies, press the Start-B&W key.
5When NEXT PAGE? appears in the message window, place the second 
document page on the original glass, and then press the Select key.
6Repeat step 5 until all document pages have been scanned.
7After all document pages have been scanned, specify the desired number 
of copies using the keypad, and then press the Start-Color key or the 
Start-B&W key to begin printing.
Downloaded From ManualsPrinter.com Manuals