Konica Minolta bizhub C20 User Manual

							5Camera Direct
Downloaded From ManualsPrinter.com Manuals 
						

							Camera Direct 148
Camera Direct
If a digital camera with PictBridge (1.0 or later) is connected to the machine 
through the USB HOST port, images stored on the digital camera can be 
printed directly from the machine.
For details on using the digital camera, refer to your digital cameras 
manual.
The following features are not supported with Camera Direct.
- DPOF AUTOPRINT image print
- Borderless
- Cable disconnect enable (printer status information)
- DPOF cable disconnect recovery
Printing Directly from a Digital Camera
1Select DIRECT PRINT in the UTILITY menu, and then specify set-
tings for 
IMAGE QUALITY, PAPER SIZE and N-UP LAYOUT.
For details on the DIRECT PRINT menu, refer to “DIRECT PRINT 
Menu” on page 67.
If the settings on the digital camera have been changed, the digital 
camera settings are given priority.
2Connect the USB cable to the dig-
ital camera and to the USB HOST 
port.
A USB cable is not 
included with the machine 
and must be purchased 
separately, if not supplied 
with your digital camera.
3From the digital camera, specify 
the image that you wish to print and the desired number of copies.
4Start printing from the digital camera.
Downloaded From ManualsPrinter.com Manuals 
						

							6Memory Direct
Downloaded From ManualsPrinter.com Manuals 
						

							Memory Direct 150
Memory Direct
PDF, XPS, JPEG and TIFF files saved on USB memory devices can be 
printed by plugging the USB memory device into the machine.
Memory direct can be used only if the optional hard disk kit or a Com-
pactFlash card is installed.
In order to perform collated printing with memory direct, the optional 
hard disk kit or a CompactFlash card of 1 GB or more must be 
installed.
For details on specifying settings with the control panel, refer to “MEM-
ORY PRINT Menu” on page 101.
Printing From a Connected USB Memory Device
1Plug the USB memory device 
into the USB HOST port.
2In the main screen, press the + or , key to select MEMORY PRINT, and 
then press the Select key.
3Press the + or , key to select LIST OF FILES, and then press the 
Select key.
When all files (PDF, XPS, JPEG and TIFF) are displayed, select 
Type OF FILES, and then press the Select key.
4From the file list, select the file that you wish to print, and then press the 
Select key.
If the file to be printed is in a folder, select the folder, and then press the 
Select key.
A maximum of 99 folders and files can be displayed.
Up to 7 folder levels can be displayed.
5Specify the desired print settings. 
For details on memory direct, refer to “MEMORY PRINT Menu” on 
page 101.
Downloaded From ManualsPrinter.com Manuals 
						

							Memory Direct 151
6Press the Start-Color key or the Start-B&W key to begin printing.
Do not unplug the USB memory device from the USB HOST port 
during memory direct printing.
Downloaded From ManualsPrinter.com Manuals 
						

							Memory Direct 152
Downloaded From ManualsPrinter.com Manuals 
						

							7Using the Copier
Downloaded From ManualsPrinter.com Manuals 
						

							Making Basic Copies 154
Making Basic Copies
This section contains descriptions of the basic copy operation procedure and 
the functions that are frequently used when making copies, such as specify-
ing the zoom ratio and the copy density.
Before making copies, check that the Copy key is lit up in green.
If the key is not lit up in green, press the Copy key to enter Copy 
mode.
The default paper size setting can be changed with PAPER SETUP in 
the 
UTILITY menu. For details, refer to “PAPER SETUP Menu” on 
page 37.
If, while specifying settings, no key is pressed for the length of time specified 
for 
AUTO PANEL RESET, the entered settings are canceled and the main 
screen (Copy mode) is displayed.
Basic Copy Operation
1Position the document to be 
copied.
For details on positioning 
the document, refer to 
“Placing a document on 
the original glass” on 
page 135 and “Loading a 
document into the ADF” 
on page 136.
2Press the Copy key. 
Downloaded From ManualsPrinter.com Manuals 
						

							Making Basic Copies 155
3Specify the desired copy settings.
For details on specifying the copy mode and the copy density, refer 
to “Specifying the Copy Quality Setting” on page 155.
For details on specifying the zoom ratio, refer to “Specifying the 
Zoom Ratio” on page 156.
For details on selecting the media tray, refer to “Selecting the 
Media Tray” on page 157.
For details on setting 2in1 and 4in1 copying, refer to “Setting 2in1/
4in1 Copying” on page 158.
For details on ID card copying, repeat copying or poster copying, 
refer to “Setting a Copy Function” on page 159.
For details on duplex (double-sided) copying, refer to “Setting 
Duplex (Double-Sided) Copying” on page 163.
For details on setting collated copying, refer to “Setting Collated 
(Sort) Copying” on page 165.
4Using the keypad, specify the desired number of copies.
If the number of copies was incorrectly entered, press the Back 
key, and then specify the correct number of copies.
5To print color copies, press the Start-Color key. To print monochrome 
copies, press the Start-B&W key.
Copying begins.
If the Stop/Reset key is pressed while copying, JOB CANCEL 
appears. To stop copying, select 
YES. To continue copying, select 
NO.
Specifying the Copy Quality Setting
Select the document type and copy density appropriate for the contents and 
density of the document to be copied.
Selecting the Document Type
1In the main screen (Copy mode), press the + or , key to select the cur-
rent copy quality setting, and then press the Select key.
2Press the + or , key to select MODE, and then press the Select key.
3Press the + or , key to select MIX, TEXT, PHOTO, FINE/MIX, FINE/
TEXT
 or FINE/PHOTO, and then press the Select key.
The main screen (Copy mode) appears again.
Downloaded From ManualsPrinter.com Manuals 
						

							Making Basic Copies 156
Specifying the Copy Density
1In the main screen (Copy mode), press the + or , key to select the cur-
rent copy quality setting, and then press the Select key.
2Press the + or , key to select DENSITY, and then press the Select key.
3Press the * or ) key to select the desired copy density, and then press 
the Select key.
As the indicator is moved to right, the density becomes darker.
If TEXT or FINE/TEXT is selected as the copy mode, select 
either 
AUTO or MANUAL in step 3. If MANUAL is selected, specify 
the copy density.
Specifying the Zoom Ratio
The zoom ratio can be specified either by selecting a preset zoom ratio or by 
specifying a custom zoom ratio.
Selecting a Preset Zoom Ratio
1In the main screen (Copy mode), press the + or , key to select the cur-
rent zoom ratio setting, and then press the Select key.
2Press the + or , key to select FIXED, and then press the Select key.
3Press the + or , key to select the desired zoom ratio, and then press the 
Select key.
The following zoom ratios can be selected.
In metric dimensions:
25%, 50%, 70% (A4
→A5), 81% (A4→B5), 100%, 115% (B5→A4), 
141% (A5
→A4), 200%, 400%
In inch dimensions:
25%, 50%, 64% (LT
→ST), 78% (LG→LT), 100%, 129% (ST→LT ) ,  
154% (ST
→LG), 200%, 400%
The zoom ratio cannot be changed using the keypad.
Specifying a Custom Zoom Ratio
1In the main screen (Copy mode), press the + or , key to select the cur-
rent zoom ratio setting, and then press the Select key.
2Press the + or , key to select MANUAL, and then press the Select key.
3Use the keypad to type in the desired zoom ratio, or press the + or , key 
to specify the zoom ratio, and then press the Select key.
Downloaded From ManualsPrinter.com Manuals