Konica Minolta bizhub C10P User Manual

							Configuration Menu Overview 39
All factory default values are shown in bold.
ETHER-
NET
TCPIPENABLESettingsYES/NO
If YES is selected, TCP/IP is enabled.
If NO is selected, TCP/IP is disabled.
DHCP/
BOOTPSettingsYES/NO
Select whether or not the IP address is 
automatically acquired.
If YES is selected, the IP address is auto-
matically acquired.
If NO is selected, the IP address is not 
automatically acquired.
IP 
ADDRESSSetting192.168.1.2
Set the IP address for this printer on the 
network.
Use the Up, Down, Left, and Right keys 
to specify the value.
If the IP address is manually specified, 
DHCP/BOOTP is automatically set to NO.
DEFAULT  
ROUTER
Setting192.168.1.2
Specify the IP address of the router if one 
is on the network. Use the Up, Down, 
Left, and Right keys to specify the value.
 
ENABLE 
USB
 
ACTIVE I/F
 
JOB TIMEOUT
 
JOB TIMEOUT 
PARALLEL
Downloaded From ManualsPrinter.com Manuals 
						

							Configuration Menu Overview 40
SUBNET 
MASKSetting0.0.0.0
Specify the subnet mask for the network. 
Use the Up, Down, Left, and Right keys 
to specify the value.
ENABLE 
HTTPSettingYES/NO
Specify whether or not HTTP is used.
If YES is selected, the Web page pro-
vided to the printer by the built-in HTTP 
server is enabled.
If NO is selected, the Web page cannot 
be used.
ENABLE 
AUTO 
IPSettingYES/NO
Select whether or not the IP address is 
automatically acquired when DHCP/
BOOTP and PING, ARP are not 
functioning or when there is no response.
If NO is selected, the IP address is not 
automatically acquired.
If YES is selected, the IP address is 
automatically acquired.
IPX/SPXFRAME 
TYPESettingsAUTO/802.2/802.3/
ETHER II/SNAP
Specify the protocol used with NetWare.
ETHER 
TALK
NAME Settingsbizhub C10P
Specify the name of the printer for finding 
printers with Macintosh EtherTalk.
The printer name can contain a maxi-
mum of 16 characters.
NAME2Settings-
Specify the name of the printer for finding 
printers with Macintosh EtherTalk.
The printer name can contain a maxi-
mum of 16 characters.
Downloaded From ManualsPrinter.com Manuals 
						

							Configuration Menu Overview 41
NET 
ZONE
Settings
Specify the Macintosh EtherTalk zone.
The zone name can contain a maximum 
of 16 characters.
NET 
ZONE2
Settings-
Specify the Macintosh EtherTalk zone.
The zone name can contain a maximum 
of 16 characters.
ETHERNET 
SPEEDSettingsAUTO/100 FULL DUPLEX/ 
100 HALF DUPLEX/ 
10 FULL DUPLEX/ 
10 HALF DUPLEX
Specify the transmission speed for the network and 
the transmission method for bi-directional 
transmission.
PS 
PROTOCOLSettingsBINARY/QUOTED BINARY
Select whether PostScript jobs are received in the 
binary format or the quoted format.
USBENABLESettingsYES/NO
If YES is selected, USB is enabled. 
If NO is selected, USB is disabled.
JOB 
TIMEOUTSettings0-60-999
Specify the length of time (in seconds) until the print 
job being received is timed out when USB is being 
used.
PARAL-
LEL
JOB 
TIMEOUTSettings0-30-999
Specify the length of time (in seconds) until the print 
job being received is timed out when Parallel is 
being used.
ACTIVE 
I/FSettingsETHERNET/PARALLEL
Specify the interface to be used. 
An Ethernet and parallel connection cannot be used at the same 
time.
Downloaded From ManualsPrinter.com Manuals 
						

							Configuration Menu Overview 42
SYSTEM DEFAULT MENU
With this menu, settings can be specified to adjust the operation of the printer, 
such as the time until the machine enters Energy Saver mode.
 PRINT QUALITY
 
EMULATIONS 
DEFAULT
 
AUTO DEFAULT
 
ERROR PAGE
 
PCL LINE TERMINATION
 
FONT 
PITCH SIZE
 
FONT NUMBER
 
POINT SIZE
 
SYMBOL SET
 STARTUP OPTIONS 
START PAGE
 
DATE & TIME*
 
ENERGY SAVER
 SYSTEM DEFAULT
 
COLOR MODE
 
POSTSCRIPT
 
SYSSTART*
 ENERGY SAVER MGT**
 
SECURITY 
CONFIG 
ENABLE
 
SET PASSWORD
Downloaded From ManualsPrinter.com Manuals 
						

							Configuration Menu Overview 43
* These menu items appear only if an optional hard disk is installed. 
** This menu item appears only on 120 V units.
All factory default values are shown in bold.
PRINT 
QUAL
-
ITY
SettingsHIGH/STANDARD
Select the image quality for prints.
COLOR 
MODESettingsCOLOR/GRAYSCALE
Specify whether printing is in full color or grayscale.
EMULA-
TIONS
DEFAULTSettingsAUTOMATIC/POSTSCRIPT/PCL5/
PCL XL/HEX DUMP/PDF
Specify the printer control language.
If AUTO is selected, the printer automatically selects 
the printer control language from the data stream.
AUTO 
DEFAULTSettingsPCL5/POSTSCRIPT
Select the printer description language when it 
cannot be identified from the data and 
DEFAULT is 
set to 
AUTOMATIC.
POST-
SCRIPT
ERROR 
PAGESettingsON/OFF
Select whether or not an error page is 
printed when a PostScript error occurs.
 
FORMAT 
FORMAT FLASH
 
FORMAT DISK*
 
RESTORE/SAVE RESTORE FACTORY
 
SAVE CUSTOM
 RESTORE CUSTOM
 CAPTURE PRT JOB*
Downloaded From ManualsPrinter.com Manuals 
						

							Configuration Menu Overview 44
PCLLINE 
TERMI
-
NATION
SettingsCR=CR LF=CRLF/ 
CR=CR LF=LF/ 
CR=CRLF LF=LF/ 
CR=CRLF LF=CRLF
Select the definitions of the CR/LF codes 
in the PCL language.
FONTPITCH 
SIZESettings44-1000-9999
Specify the bitmap font size in 
the PCL language.
FONT 
NUMBERSettings0-32767
Specify the font used with the 
PCL language.
The font numbers that appear 
correspond to the PCL font 
list. For details on printing the 
font list, refer to 
“PRINT 
MENU” on page 30.
POINT 
SIZESettings400-1200- 
99975
Specify the outline font size in 
the PCL language.
SYMBOL 
SETSpecify the symbol set used 
with the PCL language.
The default setting is PC8.
STARTUP 
OPTIONSSTART 
PAGESettingsNO/YES
Select whether or not a startup page is printed when 
the printer is turned on.
If YES is selected, the startup page is printed when 
the printer is turned on.
If NO is selected, the startup page is not printed.
Downloaded From ManualsPrinter.com Manuals 
						

							Configuration Menu Overview 45
SYSSTARTSettingsNO/YES
Select whether or not the PostScript format 
definitions file is applied when the printer is turned 
on.
If YES is selected, the PostScript format definitions 
file is applied.
If NO is selected, the PostScript format definitions 
file is not applied.
DATE & 
TIMESettingsyyyymmdd:hhmmss
Set the date and time on the hard disk’s time-of-day (TOD) clock.
The settings appear in the following order: year, month, day:hour, 
minutes, seconds.
ENERGY 
SAVERSettings15 MINUTES/30 MINUTES/1 HOUR/ 
2 HOURS
Specify the length of time until the machine enters Energy Saver 
mode.
This menu item appears only when ENERGY SAVER is set to 
ON.
2 HOURS is displayed only on 120 V units.
ENERGY 
SAVER 
MGTSettingsON/OFF
If ON is selected, the machine will enter Energy Saver mode.
If OFF is selected, the machine will not enter Energy Saver 
mode.
This menu item is displayed only on 120 V units.
Downloaded From ManualsPrinter.com Manuals 
						

							Configuration Menu Overview 46
SECU-
RITY
CONFIGENABLESettingsOFF/ON
Select whether or not the menus are 
protected with a password.
If ON is selected, all menus are protected 
with a password.
SET 
PASS
-
WORD
SettingsSYSADMIN
Specify the password for displaying the 
menus. The specified password is 
applied only if 
SECURITY/CONFIG/
ENABLE
 is set to ON.
The password can contain a maximum of 
16 characters.
CAP-
TURE 
PRT 
JOB
SettingsOFF/ON/PRINT
Select whether or not received print jobs are saved on the hard 
disk.
If OFF is selected, print jobs are not saved on the hard disk.
If ON is selected, received print jobs are saved on the hard disk 
without being printed.
If PRINT is selected, received print jobs are printed and saved 
on the hard disk.
FORMATFORMAT 
FLASHSettingsNO/YES
Select whether or not to initialize the flash RAM.
If YES is selected, the flash RAM is initialized.
FORMAT 
DISKSettingsNO/YES
Select whether or not to initialize the hard disk.
If YES is selected, the hard disk is initialized.
Downloaded From ManualsPrinter.com Manuals 
						

							Configuration Menu Overview 47
SERVICE MENU
With this menu, the service representative can adjust the printer and perform 
maintenance operations. This menu cannot be used by the user.
LANGUAGE MENU
RESTORE 
/SAVERESTORE 
FACTORYSettingsNO/YES
Select whether or not all menu items are reset to 
their initial settings.
If YES is selected, all menu items are reset to their 
initial settings.
SAVE 
CUSTOMSettingsNO/YES
Select whether or not all changed menu settings are 
saved.
If YES is selected, all changes are saved.
RESTORE 
CUSTOMSettingsNO/YES
Select whether or not menu items are reverted to 
the previously saved settings.
If YES is selected, the menu items revert to the 
previously saved settings.
ENGLISH/FRANCAIS/
DEUTSCH/ESPANOL/
ITALIANO/PORTUGES/
CESKY/JAPANESEThe display language of the message window 
can be changed to the required language.
The default setting is English.
Downloaded From ManualsPrinter.com Manuals 
						

							Configuration Menu Overview 48
Downloaded From ManualsPrinter.com Manuals