Home > Konica > Printer > Konica Minolta bizhub C10P User Manual

Konica Minolta bizhub C10P User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Konica Minolta bizhub C10P User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 61 Konica manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							Configuration Menu Overview 29
    Entering the Password
    In order to print or delete a secured job, the four-digit password specified from 
    the printer driver must be entered. Follow the procedure described below to 
    type in the four-digit password specified from the printer driver.
    1Press the Up and Down keys to increase or decrease the first digit of the 
    password.
    2Press the Right key to move the cursor to the next digit.
    3Press the Up and Down keys to increase or decrease the second digit of 
    the password.
    4Continue these steps until all four digits of the password are specified.
    5Press the Menu/Select key.
    The PRINT/DELETE selection screen appears.
    If an incorrect password is entered, INVALID ENTRY appears and 
    the screen for entering the password appears again.
    Downloaded From ManualsPrinter.com Manuals 
    						
    							Configuration Menu Overview 30
    PRINT MENU
    With this menu, printer information, such as the configuration page and the 
    demo page, can be printed.
    All factory default values are shown in bold.
    MENU MAPSettingsYES/NO
    Prints the menu map.
    CONFIGURA-
    TION 
    SettingsYES/NO
    Prints the configuration page.
    STATISTICS 
    PAGESettingsYES/NO
    Prints the statistics page such as the number of pages 
    printed.
    FONT LISTPOST 
    SCRIPT
    SettingsYES/NO
    Prints the PostScript font list.
    PCLSettingsYES/NO
    Prints the PCL font list.
    DIRECTORY 
    LISTSettingsYES/NO
    Prints the directory list of the hard disk and flash.
    If the hard disk drive is not installed, only the flash 
    directory list is printed.
     
    POSTSCRIPT
     
    PCL
     
    MENU MAP
     
    DIRECTORY LIST
     
    CONFIGURATION
     
    FONT LIST
     
    STATISTICS PAGE
     
    PRINT MENU
    Downloaded From ManualsPrinter.com Manuals 
    						
    							Configuration Menu Overview 31
    PAPER MENU
    With this menu, the media used for printing can be managed.
    * This menu item appears only if the duplex option is installed. 
    ** These menu items appear only if the optional lower feeder unit is 
    installed.
     
    MEDIA TYPE
     
    TRAY 1 MODE
     
    TRAY 1 
    MEDIA SIZE
     
    MEDIA TYPE
     
    TRAY 2** 
    MEDIA SIZE
     
    CUSTOM SIZE
     
    AUTO CONTINUE
     
    INPUT TRAY
     
    PAGE RECOVERY
     
    DUPLEX*
     
    ORIENTATION
     
    LENGTH (xx)
     
    WIDTH (xx)
     
    PAPER MENU
     
    TRAY CHAINING**
     
    MAP**
     
    LOGICAL TRAY 0
     
    MODE
     
    LOGICAL TRAY 9
    ~
    Downloaded From ManualsPrinter.com Manuals 
    						
    							Configuration Menu Overview 32
    All factory default values are shown in bold.
    INPUT 
    TRAYTRAY 1 
    MODESettingsAUTO/CASSETTE
    When printing from Tray 1, select whether the paper 
    size and paper type set from the printer driver or the 
    MEDIA SIZE and MEDIA TYPE settings set by 
    selecting 
    PAPER MENU/INPUT TRAY/TRAY 1 
    in the control panel have priority.
    If AUTO is selected, the printer driver settings have 
    priority during printing.
    If CASSETTE is selected, printing is performed 
    when the printer driver settings and the control 
    panel settings are all the same.
    TRAY 1MEDIA 
    SIZESettingsLETTER/LEGAL/
    EXECTIVE/A4/A5/
    B5(JIS)/B5(ISO)/GOVT 
    LETTER/STATEMENT/
    FOLIO/SP FOLIO/UK 
    QUARTO/FOOLSCAP/GOVT 
    LEGAL/ENV# 10/ENV 
    C5/ENV C6/ENV DL/ENV 
    MONARCH/ENV CHOU#3/
    ENV CHOU#4/JPOST/KAI 
    16/32K/JPOST-D/16K/
    ENV YOU#4/PHOTO SIZE 
    /CUSTOM
    Select the setting for the size of paper 
    loaded into Tray 1.
    The default setting for North 
    America is 
    LETTER. The default 
    setting for all other regions is 
    A4.
    MEDIA 
    TYPESettingsPLAIN PAPER/
    TRANSPARENCY/LABEL/
    LETTERHEAD/ENVELOPE/
    POSTCARD/THICK/
    GLOSSY
    Select the setting for the type of paper 
    loaded into Tray 1.
    Downloaded From ManualsPrinter.com Manuals 
    						
    							Configuration Menu Overview 33
    TRAY 2MEDIA 
    SIZESettingsLETTER/A4
    Select the setting for the size of paper 
    loaded into Tray 2.
    The default setting for North 
    America is 
    LETTER. The default 
    setting for all other regions is 
    A4.
    MEDIA 
    TYPESettingsPLAIN PAPER/
    LETTERHEAD
    Select the setting for the type of paper 
    loaded into Tray 2.
    CUSTOM 
    SIZEWIDTH 
    (xx)
    Settings92-216 mm  
    (3.63-8.50 in.)
    Specify the width of the custom-sized 
    paper loaded into Tray 1.
    On the model for North America, 
    the settings appear in inches and 
    the menu item appears as 
    WIDTH(IN). On the models for 
    all other regions, the settings 
    appear in millimeters and the 
    menu item appears as 
    WIDTH(MM).
    LENGTH 
    (xx)
    Settings148-356 mm 
    (5.83-14.01 in.)
    Specify the length of the custom-sized 
    paper loaded into Tray 1.
    On the model for North America, 
    the settings appear in inches and 
    the menu item appears as 
    LENGTH(IN). On the models for 
    all other regions, the settings 
    appear in millimeters and the 
    menu item appears as 
    LENGTH(MM).
    AUTO 
    CONTINUESettingsOFF/ON
    Select whether or not printing continues if the size or 
    type of paper in the selected paper tray is different 
    from the size or type of paper for the print job.
    Downloaded From ManualsPrinter.com Manuals 
    						
    							Configuration Menu Overview 34
    TRAY 
    CHAININGSettingsYES/NO
    If YES is selected and the specified paper tray runs 
    out of paper during printing, a paper tray loaded with 
    paper of the same size is automatically selected so 
    printing can continue.
    If NO is selected and the specified paper tray runs 
    out of paper, printing stops.
    MAPMODESettingsON/OFF
    Select whether or not the Tray Mapping 
    function is used.
    LOGI-
    CAL 
    TRAY 
    0-9
    SettingsPHYSICAL TRAY 1/ 
    PHYSICAL TRAY 2
    Specify whether jobs received from 
    another manufacturers printer driver are 
    printed using Tray 1 or Tray 2.
    PHYSICAL TRAY 2 is the default only 
    for 
    LOGICAL TRAY 2. The default for 
    all other logical trays is 
    PHYSICAL 
    TRAY 1
    .
    DUPLEXSettingsOFF/SHORTEDGE/LONGEDGE
    If OFF is selected, duplex printing is not possible.
    If LONGEDGE is selected, the pages will be printed on both sides 
    of the paper for long-edge binding.
    If SHORTEDGE is selected, the pages will be printed on both 
    sides of the paper for short-edge binding.
    ORIEN-
    TATION
    SettingsPORTRAIT/LANDSCAPE
    Specify the orientation of the media.
    PAGE 
    RECOV-
    ERY
    SettingsON/OFF
    Select whether or not the page is printed again after recovering 
    from a paper misfeed.
    If ON is selected, the page that was misfed is printed again.
    If OFF is selected, printing continues with the next page without 
    printing the misfed page.
    Downloaded From ManualsPrinter.com Manuals 
    						
    							Configuration Menu Overview 35
    QUALITY MENU
    With this menu, settings for the print quality can be specified.
     
    BLACK
     
    CYAN
     
    MAGENTA
     
    TONER OUT ACTION
     
    REPLACE TONER
     
    AIDC 
    REQUEST AIDC
     
    QUALITY MENU
     
    YELLOW
     
    BLACK
     
    CYAN
     
    MAGENTA
     
    YELLOW
     
    DENSITY CONTROL
     
    MODE
     
    TONER LOW ACTION
    Downloaded From ManualsPrinter.com Manuals 
    						
    							Configuration Menu Overview 36
    All factory default values are shown in bold.
    REPLACE 
    TONERBLACKSettingsYES/NO
    When YES is selected, the carousel rotates to the 
    black toner cartridge, so that it can be replaced.
    For details on replacing the toner cartridge, refer to 
    “Replacing a Toner Cartridge” on page 78.
    CYANSettingsYES/NO
    When YES is selected, the carousel rotates to the 
    cyan toner cartridge, so that it can be replaced.
    For details on replacing the toner cartridge, refer to 
    “Replacing a Toner Cartridge” on page 78.
    MAGENTASettingsYES/NO
    When YES is selected, the carousel rotates to the 
    magenta toner cartridge, so that it can be replaced.
    For details on replacing the toner cartridge, refer to 
    “Replacing a Toner Cartridge” on page 78.
    YELLOWSettingsYES/NO
    When YES is selected, the carousel rotates to the 
    yellow toner cartridge, so that it can be replaced.
    For details on replacing the toner cartridge, refer to 
    “Replacing a Toner Cartridge” on page 78.
    TONER 
    LOW 
    ACTION
    SettingsYES / NO
    When set to YES, Toner low indication will show up on the control 
    panel when one or more toner cartridges reach to the low 
    condition.
    TONER 
    OUT 
    ACTIONSettingsSTOP/CONTINUE
    When set to CONTINUE, printing continues even if the toner 
    cartridge is empty.
    When set to STOP, printing stops when the toner cartridge is 
    empty.
    Downloaded From ManualsPrinter.com Manuals 
    						
    							Configuration Menu Overview 37
    AIDCREQUEST 
    AIDCSettingsNO/YES
    If YES is selected, image adjustments are 
    performed.
    MODESettingsON/OFF
    If ON is selected, the image adjustments are 
    applied.
    If OFF is selected, image adjustments are not 
    applied.
    DENSITY 
    CONTROLBLACKSettings1/2/3/4/5
    Adjust the density of the black toner to one of five 
    levels.
    If 1 is selected, the density is at its lightest level. If 5 
    is selected, the density is at its darkest level.
    CYANSettings1/2/3/4/5
    Adjust the density of the cyan toner to one of five 
    levels.
    If 1 is selected, the density is at its lightest level. If 5 
    is selected, the density is at its darkest level.
    MAGENTASettings1/2/3/4/5
    Adjust the density of the magenta toner to one of 
    five levels.
    If 1 is selected, the density is at its lightest level. If 5 
    is selected, the density is at its darkest level.
    YELLOWSettings1/2/3/4/5
    Adjust the density of the yellow toner to one of five 
    levels.
    If 1 is selected, the density is at its lightest level. If 5 
    is selected, the density is at its darkest level.
    Downloaded From ManualsPrinter.com Manuals 
    						
    							Configuration Menu Overview 38
    INTERFACE MENU
    With this menu, interface settings can be specified.
    Restart the printer after changing settings in the ETHERNET menu.
     
    IP ADDRESS
     
    DEFAULT ROUTER
     
    SUBNET MASK
     
    FRAME TYPE
     
    NAME
     
    TCPIP 
    ENABLE
     
    DHCP/BOOTP
     
    IPX/SPX
     
    ETHERTALK
     
    ETHERNET SPEED
     
    ETHERNET
     
    INTERFACE MENU
     
    ENABLE HTTP
     
    ENABLE AUTO IP
     
    NETZONE
     
    NETZONE2
     
    NAME2
     
    PS PROTOCOL
    Downloaded From ManualsPrinter.com Manuals 
    						
    All Konica manuals Comments (0)

    Related Manuals for Konica Minolta bizhub C10P User Manual