Konica Minolta bizhub 420 User Manual

Utility 16
bizhub 500/420/360 (Phase 3) 16-495 Weekly Timer Setting>1 Weekly Timer ON/OFF Setting
Use this function to enable or disable the Weekly Timer.
1Follow the procedure described in How to access the Administrator 
Setting Screen on page 16-3 to display the Administrator Setting 
Screen.
2Touch [1 System Setting], [5 Weekly Timer Setting], and then [1 Weekly 
Timer ON/OFF Setting].
The Weekly Timer ON/OFF Setting Screen will be displayed.
Downloaded From ManualsPrinter.com Manuals 

16Utility 
16-50 bizhub 500/420/360 (Phase 3)
3Touch [ON] or [OFF] to highlight it.
The default setting is OFF. 
– [ON]: Enables the Weekly Timer. With this setting ON, the machine 
should be kept powered.
– [OFF]: Disables the Weekly Timer. Use the main power switch and 
sub power switch to turn on/off the machine.
4Touch [OK] to complete the setting.
– To cancel the change, touch [Cancel].
In either case, the Weekly Timer Setting Screen will be restored.
5If further changes are required, touch the...

Utility 16
bizhub 500/420/360 (Phase 3) 16-515 Weekly Timer Setting>2 Time Setting
Use this function to set the on/off times in hours and minutes for each day of 
the week.
0If ON-time and OFF-time are the same, the power will not be turned on.
0Setting on/off times will not turn on the power on that day. To turn on the 
machine power, specify the days to operate the timer in the next setting 
(Date Setting).
Downloaded From ManualsPrinter.com Manuals 

16Utility 
16-52 bizhub 500/420/360 (Phase 3)
1Follow the procedure described in How to access the Administrator 
Setting Screen on page 16-3 to display the Administrator Setting 
Screen.
2Touch [1 System Setting], [5 Weekly Timer Setting], and then [2 Time 
Setting].
The Time Setting Screen will be displayed.
Downloaded From ManualsPrinter.com Manuals 

Utility 16
bizhub 500/420/360 (Phase 3) 16-53
3Specify the on/off times.
– Touch the key for the desired day to highlight it, then use the control 
panel keypad to enter a two-digit ON hour in terms of the 24-hour 
clock. (e.g. 14 for 2 p.m.)
Use the right arrow key to move the cursor to ON minute, then enter 
the desired ON minute. (e.g. 07 for 7 min.)
Similarly enter the OFF hour and OFF minute.
– If wrong number is entered, touch [Clear] to delete it, then enter the 
correct number.
Press [C] (Clear)...

16Utility 
16-54 bizhub 500/420/360 (Phase 3)
4Touch [OK] to complete the setting.
– To cancel the change, touch [Cancel].
In either case, the Weekly Timer Setting Screen will be restored.
5If further changes are required, touch the desired key.
Downloaded From ManualsPrinter.com Manuals 

Utility 16
bizhub 500/420/360 (Phase 3) 16-555 Weekly Timer Setting>3 Date Setting
Use this function to set the timer on/off for a given day of a given month. Set 
the on-off condition for specific days individually or collectively for all 
Mondays through Sundays of the given month.
1Follow the procedure described in How to access the Administrator 
Setting Screen on page 16-3 to display the Administrator Setting 
Screen.
2Touch [1 System Setting], [5 Weekly Timer Setting], and then [3 Date 
Setting]....

16Utility 
16-56 bizhub 500/420/360 (Phase 3)
3Touch to highlight the key of the desired date of the calendar to 
activate the timer on that day.
– Use the [–] and [+] keys to scroll to the desired year/month.
4To collectively set the on/off data for the entire month by the day of the 
week, use the keys under Daily Setting to switch on/off.
– Touch the bidirectional arrow key to switch ON/OFF indication of 
the keys beside the day to be specified, then touch it.
Touching [ON] will highlight all...

Utility 16
bizhub 500/420/360 (Phase 3) 16-575 Weekly Timer Setting>4 Select Time for Power Save
The Weekly Timer function turns the machine on and off once a day. Use 
Select Time for Power Save to shut down the power and then turn it on again 
while the machine is turned on according to the Weekly Timer setting. Only 
one off-time interval can be programmed.
The factory default of this setting is OFF.
Downloaded From ManualsPrinter.com Manuals 

16Utility 
16-58 bizhub 500/420/360 (Phase 3)
1Follow the procedure described in How to access the Administrator 
Setting Screen on page 16-3 to display the Administrator Setting 
Screen.
2Touch [1 System Setting], [5 Weekly Timer Setting], and then [4 Select 
Time for Power Save].
The Select Time for Power Save Screen will be displayed.
Downloaded From ManualsPrinter.com Manuals