Konica Minolta bizhub 420 User Manual

Utility 15
bizhub 500/420/360 (Phase 3) 15-43
5Touch either [ON] or [OFF] to highlight it.
6If further changes are required, touch the desired key.
Downloaded From ManualsPrinter.com Manuals 

15Utility 
15-44 bizhub 500/420/360 (Phase 3)
Downloaded From ManualsPrinter.com Manuals 

16Utility 
Downloaded From ManualsPrinter.com Manuals 

Downloaded From ManualsPrinter.com Manuals 

Utility 16
bizhub 500/420/360 (Phase 3) 16-3
16 Utility 
16.1 Administrator Setting Outlines
This section describes the items in [3 Administrator Setting] of the 
Utility/Counter Screen, and setting procedure of these items.
The Administrator Setting can only be specified by the administrator after a 
specific administrator password is entered. 
How to access the Administrator Setting Screen
1Press [Utility/Counter] on the control 
panel.
The Utility/Counter Screen will be 
displayed.
2Touch [3...

16Utility 
16-4 bizhub 500/420/360 (Phase 3)
3Enter an eight-digit administrator password, then touch [OK].
The Administrator Setting Screen will be displayed.
4Set each function item.
Downloaded From ManualsPrinter.com Manuals 

Utility 16
bizhub 500/420/360 (Phase 3) 16-5How to use [Close], [Exit], and layer keys
Touch [Close] to return to the previous screen.
Touch the desired layer key on the  lef t s id e ar e a o f the screen to jump to that 
screen.
Touch [Exit] to restore the Basic Screen.
Downloaded From ManualsPrinter.com Manuals 

16Utility 
16-6 bizhub 500/420/360 (Phase 3)Chart of Setting Items on Utility Screens
This section uses a systematic chart to describe the setting items provided 
on layered Utility Screens.
This chart includes not only the Administrator Setting items to be performed 
by an administrator but User Setting items described in Utility  on page 15-3.
Administrator Security Level
The Administrator Security Level setting in the Administrator Setting can 
allow general users to specify some settings to be...

Utility 16
bizhub 500/420/360 (Phase 3) 16-7Marks and indication in the chart
The dimmed items will be allowed in User Setting mode by the Administrator 
Security Level setting.
For details of the items marked with *, refer to the User manual [Network 
Scanner Operations].
For details of the items marked with **, refer to the IC-204 User manual.
For details of the items marked with ***, refer to the User manual [Box 
Operations].
For details of the items marked with ****, refer to the User manual [Fax...

16Utility 
16-8 bizhub 500/420/360 (Phase 3)
[1] One-
Touch Regis-
tration[3] User Box [1] Pub-
lic/Personal 
User Box***
[2] Bulletin 
Board User 
Box***
[3] Relay User 
Box***
[2] User Set-
ting (p. 15-3)[1] System 
Setting 
(p. 15-8)[1] Language 
Selection
[2] Measure-
ment Unit 
Setting
[3] Paper Tray 
Setting[1] Paper 
Type Paper Type
[2] Auto Tray 
Select Set-
ting
[3] Auto Tray 
Switch 
ON/OFF
[4] No Match-
ing Paper in 
Tray Setting
[5] Print Lists
[5] Power 
Save SettingLow Power 
Mode Setting...