Konica Minolta bizhub 420 User Manual

Utility 15
bizhub 500/420/360 (Phase 3) 15-33
5Select either [Current Print Jobs] or [Print Job History].
6If further changes required, touch the desired key.
Downloaded From ManualsPrinter.com Manuals 

15Utility 
15-34 bizhub 500/420/360 (Phase 3)
15.4 3 Initial Setting
Specify the copy settings to be set automatically when the machine is reset.
The following two types of initial setting can be specified.
-Factory default: Settings specified when the machine is set up.
-Current setting: Settings specified from the touch panel before Utility 
mode is entered.
2
Note 
The machine will be reset:
- when the machine is powered on
- when Auto Reset is operated
- when Power Save is operated
- when copy...

Utility 15
bizhub 500/420/360 (Phase 3) 15-35
1First specify the copy settings to be used as initial setting, if factory 
default is not desired.
2Press the [Utility/Counter] to display the Utility/Counter Screen.
3Touch [2 User Setting] to display the User Setting Screen.
4Touch [3 Initial Setting].
The Initial Setting Screen will be displayed.
5Touch [Current Setting] or [Factory Default] to highlight it.
6Touch [OK] to complete the setting.
– To cancel the change, touch [Cancel].
In either case, the...

15Utility 
15-36 bizhub 500/420/360 (Phase 3)
15.5 4 Copier Setting
Auto Booklet ON When Fold & Staple
Set the machine to automatically select the Booklet function when Fold & 
Staple is selected.
1Press the [Utility/Counter] to display the Utility/Counter Screen.
2Touch [2 User Setting] to display the User Setting Screen.
3Touch [4 Copier Setting].
The Copier Setting Screen will be displayed.
4Touch [Auto Booklet ON When Fold & Staple].
The setting menu will be displayed on the right side of the...

Utility 15
bizhub 500/420/360 (Phase 3) 15-37
5Touch either [Auto Select Booklet] or [OFF] to highlight it.
6If further changes are required, touch the desired key.
2
Note 
This setting is available only for the machine with Finisher FS-510 with 
Saddle stitcher SD-502 option installed.
Downloaded From ManualsPrinter.com Manuals 

15Utility 
15-38 bizhub 500/420/360 (Phase 3)Auto Zoom for Combine/Booklet
Set the machine to automatically select an appropriate magnification ratio 
when Combine Originals or Booklet function is selected along with Auto 
Paper Select.
With [Auto Display Zoom Ratio] selected:
e0.707 for 2 in 1, Booklet 
e0.500 for 4 in 1 
e0.353 for 8 in 1 
With [OFF] selected: Not selected automatically
1Press the [Utility/Counter] to display the Utility/Counter Screen.
2Touch [2 User Setting] to display the User...

Utility 15
bizhub 500/420/360 (Phase 3) 15-39The setting menu will be displayed on the right side of the screen.
5Touch either [Auto Display Zoom Ratio] or [OFF] to highlight it.
The magnification ratio to be selected for each mode is as follows.
6If further changes are required, touch the desired key.
Downloaded From ManualsPrinter.com Manuals 

15Utility 
15-40 bizhub 500/420/360 (Phase 3)Sort/Group Auto Change
Set the machine to automatically select the Sort mode when two or more 
sheets of the original are to be printed in a single job.
With [ON] selected When the original document is loaded into ADF and 
[Start] is pressed, the machine will automatically select the Group mode if 
original count is one, or select the Sort mode if original count is two or more.
With [OFF] selected: The machine will not select the finishing mode...

Utility 15
bizhub 500/420/360 (Phase 3) 15-41
5Touch either [ON] or [OFF] to highlight it.
6If further changes are required, touch the desired key.
Downloaded From ManualsPrinter.com Manuals 

15Utility 
15-42 bizhub 500/420/360 (Phase 3)Enlarged Rotation
When turned on the feature allows the machine to automatically rotate and 
enlarge an 8.5 original image to match the short-edge-fed A3 or B4 paper 
size.
1Press the [Utility/Counter] to display the Utility/Counter Screen.
2Touch [2 User Setting] to display the User Setting Screen.
3Touch [4 Copier Setting].
The Copier Setting Screen will be displayed.
4Touch [Enlarged Rotation].
The setting menu will be displayed on the right side of the...