Konica Minolta bizhub 420 User Manual

Finishing/Folding7
bizhub 500/420/360 (Phase 3) 7-31
8Specify any necessary copy settings.
– Auto Paper Select may be released automatically depending on the 
setting you made.
When using Sort or Group in alternating crisscross pattern, make 
sure that other copy conditions do not conflict with Auto Paper 
Select.
9Press [Start].
The scan/print job will start.
2
Note 
To cancel changes to the settings, touch [Cancel] on the Finishing 
Screen.
To cancel all settings, press [Reset].
If no other setting is...

7Finishing/Folding
7-32 bizhub 500/420/360 (Phase 3)
7.7 Copy Conditions Incompatible with Finishing/Folding
Copy Conditions 
Incompatible 
with Finish-
ing/FoldingBasic
DensityPaperZoom
AtuoBackground RemovalDensityAuto Paper SelectPaper Tray/Large capacity trayMultiple bypass trayNormalRecycled PaperOHPLabelTraceUserLetterheadPostcardThin PaperThick PaperColored PaperEnvelopeAuto Zoome 1.0Preset ZoomZoom RatioIndependent Zoom FinishingSort
Group
Offset
Crisscross,,, ,,, ,*7 *7
Shifted...

Finishing/Folding7
bizhub 500/420/360 (Phase 3) 7-33
Copy Conditions 
Incompatible 
with Finish-
ing/FoldingBasic
Separate Scan
Combine OriginalsQualityApplication
Simplex/
DuplexCom-
bine 
PagesOriginal
TextText/PhotoPhotoDot MatrixOHP InterleaveCover ModeInsert SheetInsert ImageChaptersNeg-/Pos. Reversesingle-sided-originalsdouble-sided originalssingle-sided copiesdouble-sided copies2in14in18in1Mixed OriginalOriginal Direction SettingsMargin FinishingSort
Group,,, ,,,,,
Offset
Crisscross,,,, ,,,,,...

7Finishing/Folding
7-34 bizhub 500/420/360 (Phase 3)
Copy Conditions 
Incompatible 
with Application 
FunctionsApplication
Book Copy Booklet Pagination
Image 
Repeat
Page MarginEdit Margin
EraseImage 
Adjustment
Booklet
Stamp
Set RangeAuto Original Size DetectRepeatErase/Center EraseNon-Image ERaseCenteringNo RotationOriginal Size SettingCustom Size OriginalsSet NumberingPage #Date/TimeBuilt-in StampWatermark FinishingSort
Group,,
Offset
Crisscross, , ,,, , ,
Shifted
Staple, ,,, , , ,
Punch, ,,, , , ,...

Finishing/Folding7
bizhub 500/420/360 (Phase 3) 7-35,: Condition last selected has priority and the former selection will be 
released.
x: Incompatible
+: Condition previously selected has priority and warning message will be 
displayed.
*5: Condition last selected has priority when Booklet is automatically 
selected with Half Fold or Fold & Staple in combination.
*6: Varies according to the finishing option to be used.
*7: Offset mode will be ignored.
*8: Incompatible when Booklet is automatically...

7Finishing/Folding
7-36 bizhub 500/420/360 (Phase 3)
Downloaded From ManualsPrinter.com Manuals 

8Advanced Information
Downloaded From ManualsPrinter.com Manuals 

Downloaded From ManualsPrinter.com Manuals 

Advanced Information8
bizhub 500/420/360 (Phase 3) 8-3
8 Advanced Information
8.1 Checking Feature Selections by Proof Copying
Use this function to produce a sample of the copied set before making 
multiple copies. This is a convenient and cost effective way of viewing the 
results of the copying selections.
To make a proof copy
0Proof copy is to be made when multiple sets of copies are required from 
two or more sheets of the original.
1Position the original, then set the print quantity.
2Select the...

8Advanced Information
8-4 bizhub 500/420/360 (Phase 3)– If the sample copy gives satisfactory result, proceed to step 9.
To change any settings, proceed to the next step.
5Touch [Change Setting] on the Proof Copy Screen.
The Change Setting Screen will be displayed.
6Make the setting change as desired.
– The following settings can be changed from the screen after proof 
copying.
Print Quantity
Simplex/Duplex (except for the simplex/duplex original type)
Finishing
Folding
Cover Mode
Insert Sheet
Chapters...