Konica Minolta bizhub 420 User Manual

Application Functions6
bizhub 500/420/360 (Phase 3) 6-129
3Touch [Stamp/Overlay], then touch [Store Overlay].
The Overlaying Image Selection Screen will be displayed.
4Touch [Store Image Overlay].
The Store Image Overlay Screen will be displayed.
Downloaded From ManualsPrinter.com Manuals 

6Application Functions
6-130 bizhub 500/420/360 (Phase 3)
5Specify the image size and registration area.
– The original size will be detected automatically. To specify the 
desired size, touch [Standard Size] to select it. The registration area 
will also be designated automatically. If desired, touch [Specify 
One-Touch] to select the desired registration area.
6Enter the desired image name.
– Touch [Change] to display the Image Name Entry Screen. Use the 
touch panel keypad to enter the desired name up...

Application Functions6
bizhub 500/420/360 (Phase 3) 6-131– If the message Name is in use. Do you want to overwrite the 
present overlay image? is displayed, the image previously 
registered can be overwritten. Touching [Yes] will delete the 
previous image to overwrite it with the new one. To enter a new 
name, touch [No].
– If the message Name is in use. Please enter another name is 
displayed, the entered name cannot be used. Touch [OK], then 
repeat the procedure to enter a new name. Administrator can...

6Application Functions
6-132 bizhub 500/420/360 (Phase 3)
9Position the original to be overlaid.
10Repeat steps 2 and 3 to display the Overlaying Image Selection 
Screen.
11Recall the desired overlaying image.
– Touch the desired image data key to highlight it.
12Touch [OK] to restore the Application Screen.
– Select additional copy conditions, as desired.
13Press [Start].
The original to be overlaid will be scanned into memory.
14Touch [Complete Scan] on the Basic Screen.
15Press [Start].
The machine...

Application Functions6
bizhub 500/420/360 (Phase 3) 6-133
2
Note 
To release all the application functions, touch [Reset].
To resume the initial setting for all settings including application function, 
press [Reset] on the control panel.
2
Note 
If no other setting is desired, the copy job can be started using the 
settings currently specified without touching [OK] to return to the 
Application Screen or Basic Screen.
Downloaded From ManualsPrinter.com Manuals 

6Application Functions
6-134 bizhub 500/420/360 (Phase 3)
6.16 Copy Conditions Incompatible with Application 
Functions
Copy Conditions 
Incompatible 
with Application 
FunctionsBasic
DensityPaperZoom
AtuoBackground RemovalDensityAuto Paper SelectPaper Tray/Large capacity trayMultiple bypass trayNormalRecycled PaperOHPLabelTraceUserLetterheadPostcardThin PaperThick PaperColored PaperEnvelopeAuto Zoome 1.0Preset ZoomZoom RatioIndependent Zoom ApplicationOHP Interleave+++++++
Cover Mode++
Insert Sheet++...

Application Functions6
bizhub 500/420/360 (Phase 3) 6-135
Application
Stamp
Set Num-
bering+
Page #+
Date/Time+
Built-in 
Stamp+
Watermark+
Copy Conditions 
Incompatible 
with Application 
FunctionsBasic
DensityPaperZoom
AtuoBackground RemovalDensityAuto Paper SelectPaper Tray/Large capacity trayMultiple bypass trayNormalRecycled PaperOHPLabelTraceUserLetterheadPostcardThin PaperThick PaperColored PaperEnvelopeAuto Zoome 1.0Preset ZoomZoom RatioIndependent Zoom
Downloaded From ManualsPrinter.com Manuals 

6Application Functions
6-136 bizhub 500/420/360 (Phase 3)
Copy Conditions 
Incompatible 
with Application 
FunctionsBasic
Separate Scan
Combine OriginalsQualityApplication
Simplex/
DuplexCom-
bine 
PagesOriginal
TextText/PhotoPhotoDot MatrixOHP InterleaveCover ModeInsert SheetInsert ImageChaptersNeg-/Pos. Reversesingle-sided-originalsdouble-sided originalssingle-sided copiesdouble-sided copies2in14in18in1Mixed OriginalOriginal Direction SettingsMargin ApplicationOHP Interleave+ ++++ ,,,+
Cover Mode++++ ,...

Application Functions6
bizhub 500/420/360 (Phase 3) 6-137
Copy Conditions 
Incompatible 
with Application 
FunctionsApplication
Book Copy Booklet Pagination
Image 
Repeat
Page MarginEdit Margin
EraseImage 
Adjustment
Booklet
Stamp
Set RangeAuto Original Size DetectRepeatErase/Center EraseNon-Image ERaseCenteringNo RotationOriginal Size SettingCustom Size OriginalsSet NumberingPage #Date/TimeBuilt-in StampWatermark ApplicationOHP Interleave+++ + +
Cover Mode+ + +++ +
Insert Sheet+++++ ++ + +
Insert Image+...

6Application Functions
6-138 bizhub 500/420/360 (Phase 3),: Condition last selected has priority and the former selection will be 
released.
+: Condition previously selected has priority and warning message will be 
displayed.
*3: Condition last selected has priority only when Copy Insertion is selected.
*4: Condition last selected has priority when recommended zoom ratio is 
used in Combine Originals or Booklet.
Copy Conditions Incompatible 
with Application FunctionsFinishingFolding
SortGroup
Offset...