Konica Minolta bizhub 420 User Manual

Finishing/Folding7
bizhub 500/420/360 (Phase 3) 7-21
1Position the original to be copied.
2Using the keypad, enter the desired number of copies.
3Touch [Combine Originals] tab on the Basic Screen, then make Original 
Direction and Margin settings.
– For setting Original Direction, see Specifying Orientation of 
Original (Original Direction) on page 5-14.
For setting Margin, see Specifying Position of Binding Margin 
(Margin) on page 5-18.
– When completed, touch [Basic] tab to return to the Basic...

7Finishing/Folding
7-22 bizhub 500/420/360 (Phase 3)
5Touch [4 holes] to highlight it.
– Group and Offset are also available in combination. Touch the 
desired key to highlight it.
– To cancel the setting, touch the button again to deselect it.
6Select the punch position.
– Touch [Position] to display the Punch Position popup menu.
– Touch the desired key to highlight it.
7Touch [OK] twice.
The Basic Screen will be restored.
8Specify any necessary copy settings.
9Press [Start].
The scan/print job will...

Finishing/Folding7
bizhub 500/420/360 (Phase 3) 7-23
2
Reminder 
Finisher FS-510 trays gradually go up/down while printed materials 
output, depending on the tray selected.With Saddle Stitcher SD-502 or 
Mailbin Kit MT-501, the operation of the trays become greater. DO NOT 
allow any object to interfere with the operation of the tray around the 
finisher, as any interference may cause damage to the finisher.
Finisher FS-511 tray 2 (main tray) gradually goes down while printed 
materials output. DO NOT...

7Finishing/Folding
7-24 bizhub 500/420/360 (Phase 3)
7.5 Folding Copies at the Center/Binding Copies at the 
Center: Half Fold/ Fold & Staple
The Half Fold and Fold & Staple modes are 
available on the machine mounted with 
Finisher FS-510 and Saddle Stitcher 
SD-502 as illustrated on the right, along 
with Booklet function which will be 
automatically selected in combination.
-In the Half Fold mode, each copied sheet is creased and output to the 
Saddle stitcher tray.
-In the Fold & Staple mode, each...

Finishing/Folding7
bizhub 500/420/360 (Phase 3) 7-25Function overview
KeyDescription
Downloaded From ManualsPrinter.com Manuals 

7Finishing/Folding
7-26 bizhub 500/420/360 (Phase 3)To copy using Half Fold or Fold & Staple
0As the default setting, 1%2 mode and Booklet function will be specified 
automatically when Half Fold or Fold & Staple is selected. For details, see 
Making Multiple Page Signature Booklet (Booklet) on page 6-69.
Half Fold and Fold & Staple are still available even if 1%2 mode is 
changed or Booklet function is cancelled.
0Auto Zoom is automatically selected. Half Fold and Fold & Staple are still 
available even...

Finishing/Folding7
bizhub 500/420/360 (Phase 3) 7-27
4Touch [Half Fold] or [Fold & Staple] to highlight it.
5Touch [OK].
The Basic Screen will be restored.
6Specify any necessary copy settings.
7Press [Start].
The scan/print job will start.
2
Reminder 
Finisher FS-510 trays gradually go up/down while printed materials 
output, depending on the tray selected.With Saddle stitcher SD-502 or 
Mailbin kit MT-501, the operation of the trays become greater. DO NOT 
allow any object to interfere with the...

7Finishing/Folding
7-28 bizhub 500/420/360 (Phase 3)
7.6 Output for Machine with Separator
The machine with Separator installed can 
deliver the printed sheets separately into 
different trays.
The following four output modes are 
available for use with two output trays. As 
factory default, copies will be delivered 
into the tray 2 in Group mode.
-Sort
Select this setting to separate each set of a multi-page original.
-Group
Select this setting to separate the copies of each page in a multi-page...

Finishing/Folding7
bizhub 500/420/360 (Phase 3) 7-29To specify Separator output mode
0As the default setting, Sort is selected. No limit is established in Sort 
mode.
0Some copy conditions are incompatible with Group mode. For details, 
see Copy Conditions Incompatible with Finishing/Folding on 
page 7-32.
0If no finisher is installed and the following conditions are met, printed 
copies can be fed out and sorted in an alternating crisscross pattern.
A4- or B5-size paper is used.
Paper of the same size...

7Finishing/Folding
7-30 bizhub 500/420/360 (Phase 3)
5Select Sort or Group, and set Offset to use offset output.
– To set Sort mode, touch [Sort] to highlight it.
– To set Group mode, touch [Group] to highlight it.
– To set Sort in alternating crisscross pattern, touch [Sort] and 
[Offset] to highlight them.
– To set Group in alternating crisscross pattern, touch [Group] and 
[Offset] to highlight them.
6Select the desired output tray.
– Touch [Tray 1] or [Tray 2] to highlight it.
7Touch [OK].
The Basic...