Konica Minolta bizhub 420 User Manual

Advanced Information8
bizhub 500/420/360 (Phase 3) 8-25
3Touch the desired key to display specific information.
– Touch [5 Functionality Map] to display the Function Map Screen to 
view a chart of available functions and settings on that topic.
Use the control panel keypad to access the desired Help Screen.
4Check the information provided on that screen.
Downloaded From ManualsPrinter.com Manuals 

8Advanced Information
8-26 bizhub 500/420/360 (Phase 3)– Touch [Back] or [Fwd.] to scroll, if provided.
To view a detailed description, touch [Detail].
To jump to the screen in a higher level of the structure, touch the 
return arrow key.
5Touch [Exit] on the Help Screen, or 
press [Help] on the control panel.
The Basic Screen will be restored.
Downloaded From ManualsPrinter.com Manuals 

Advanced Information8
bizhub 500/420/360 (Phase 3) 8-27
8.6 Adjusting Control/Touch Panel Accessibility 
(Accessibility)
This section describes how to adjust the control/touch panel accessibility.
The following seven items are provided for this setting.
-Key Repeat Start/Interval Time
-Enlarge Display Timer Setting
-Message Display Time
-Sound Setting
-Touch Panel Adjustment
-Auto Reset Notification
-Enlarge Display Confirmation Screen
Specifying Key Response Time in Enlarge Display Mode (Key Repeat...

8Advanced Information
8-28 bizhub 500/420/360 (Phase 3)-The [Light] and [Dark] keys on the Density Screen.
Downloaded From ManualsPrinter.com Manuals 

Advanced Information8
bizhub 500/420/360 (Phase 3) 8-29To specify Key Repeat Start/Interval Time
0Available setting range for both start and interval times is from 0.1 to 3.0 
seconds in 0.1 second increments.
0Specified start/interval time will be in effect only when the Enlarge Display 
mode is activated.
1Press [Accessibility] on the control 
panel.
The Accessibility Setting Screen will 
be displayed.
2Touch [1 Key Repeat Start/Interval Time], or press [1] on the control 
panel keypad.
The Key Repeat...

8Advanced Information
8-30 bizhub 500/420/360 (Phase 3)
3Touch [+] or [–] to specify the desired Time to Start and Interval.
Specified value will be displayed in each area.
4Touch [OK].
The Accessibility Setting Screen will be restored.
5Touch [Close], or press [Accessibility] on the control panel.
The Basic Screen will be restored.
2
Note 
Touch [Cancel] on the Key Repeat Start/Interval Time Screen to cancel 
the setting change.
For details of the Enlarge Display mode, refer to the User manual [Enlarge...

Advanced Information8
bizhub 500/420/360 (Phase 3) 8-31Setting Timer for Enlarge Display Confirmation (Enlarge Display Timer 
Setting)
This adjustment is effective only when the machine is used in Enlarge Display 
mode.
Specify whether or not the machine displays the Enlarge Display 
Confirmation popup menu to release the Enlarge Display mode in the case 
of Auto Reset. Also specify the period of time to display the confirmation 
popup menu, if it is desired.
Downloaded From ManualsPrinter.com Manuals 

8Advanced Information
8-32 bizhub 500/420/360 (Phase 3)To specify Enlarge Display Timer Setting
0The Enlarge Display Confirmation popup menu is deactivated as factory 
default.
If the popup menu is desired, select the period of time to display from 30, 
60, 90, and 120 seconds.
0Specified setting will be in effect only when the Enlarge Display mode is 
activated.
1Press [Accessibility] on the control 
panel.
The Accessibility Setting Screen will 
be displayed.
2Touch [2 Enlarge Display Timer Setting], or...

Advanced Information8
bizhub 500/420/360 (Phase 3) 8-33
3Touch [OFF], or the desired timer key to highlight it.
– Select [OFF] for deactivate the Enlarge Display Confirmation popup 
menu.
4Touch [OK].
The Accessibility Setting Screen will be restored.
5Touch [Close], or press [Accessibility] on the control panel.
The Basic Screen will be restored.
2
Note 
Touch [Cancel] on the Enlarge Display Timer Setting Screen to cancel the 
setting change.
For details of the Enlarge Display mode, refer to the User...

8Advanced Information
8-34 bizhub 500/420/360 (Phase 3)Specifying Error Message Display Time (Message Display Time)
Specify the period of time for an error message to be displayed when any 
incorrect operation is performed.
To specify Message Display Time
0The factory default is 3 seconds.
Select either 3 seconds or 5 seconds for the display time.
1Press [Accessibility] on the control 
panel.
The Accessibility Setting Screen will 
be displayed.
2Touch [3 Message Display Time], or press [3] on the control...