JVC Projector Dla X500r Instructions Manual

Command Format
The command between this unit and the computer consists of “Header”, “Unit ID”, “Command”, “Data” and “End”. 0 Header (1 byte), Unit ID (2 bytes), Command (2 bytes), Data (n bytes), End (1 byte) Header
This binary code indicates the start of communication. Binary Code
Type Description
21 Operating command PC  " This unit
3F Reference command PC  " This unit
40 Response command
This unit  " PC
06 ACKThis unit " PC (returns to PC after the command is accepted without
error)...

Remote Control Code
Binary code is sent during communication. 0 The  following applies to 
the 
case when the remote control code is “A”. In the case of “B”, add “36” to the beginning
of the code. Remote Control Button Name Binary Code
STAND BY 37 33 30 36
ON 37 33 30 35
INPUT 37 33 30 38
INFO. Q 37 33 37 34
ENV.SETTING  Q 37 33 35 45
3D SETTING 37 33 44 35
C.M.D. 37 33 38 41
LENS CONTROL 37 33 33 30
LENS MEMORY 37 33 44 34
LENS AP. 37 33 32 30
MPC 37 33 46 30
P.ANALYZER 37 33 35 43
BEFORE/AFTER 37 33 43...

Communications Example
This section shows the communication examples of RS-232C. Operating command
Type
Command Description
Connection check PC  " This unit: 21 89 01 00 00 0A
This unit  " PC: 06 89 01 00 00 0A Connection check
Power (On) PC " This unit: 21 89 01 50 57 31 0A
This unit  "
 PC: 06 89 01 50 57 0A When power is turned on from the
Standby mode
Power (Off) PC " This unit: 21 89 01 50 57 30 0A
This unit  "

 PC: 06 89 01 50 57 0A When power 
is 
 turned off (Standby...

Specifications
Product Name
D-ILA Projector
Model Name DLA-X900RB, DLA-X700RB, DLA-X500RB/W*1,2
Display Panel/Size D-ILA device *3, 4
0.7" (1920 x 1080 pixels) x 3 (total no. of pixels: approx. 6.22 million)
Projection Lens 2.0 x power zoom lens (1.4:1 to 2.8:1), motorized zoom and focus
Light-source Lamp 230 W ultra-high pressure mercury lamp [model no.: PK-L2312U]
Average lifespan: 4000 hours (“Low” mode)
Screen Size Approx. 60" to 200" (Aspect ratio of 16:9)
Projection Distance Refer to p....

0
Design and specifications are subject to change without prior notice.
0 Please note that some of  the pictures and illustrations may have been abridged, enlarged or contextualized in order
to aid comprehension. Images may differ from the actual product. About Trademarks and Copyrights
HDMI, HDMI logo and High-Definition Multimedia Interface are trademarks or registered
trademarks of HDMI Licensing LCC.
  “x.v.Color” and the “x.v.Color” logo are trademarks of Sony CorporationScreen Size and Projection...

When a 4:3 screen is used
Screen Size
Projection Distance
Diagonal (Model) Width (mm) Height (mm) Wide-end (m) Tele-end (m)
60 12199142.224.49
70 142210672.605.24
80 162612192.986.00
90 182913723.366.75
100 203215243.747.51
110 223516764.118.26
120 243818294.499.02
130 264219814.879.77
140 284521345.2510.53
150 304822865.6311.28
160 325124386.0012.04* Projection to a 4:3 screen larger than 163" is equivalent to a size that is larger than 200" in the 16:9 format, and is
beyond our guarantee...

Types of Possible Input Signals
Video
Digital Video Signal
480p, 576p, 720p/50 Hz, 720p/60 Hz, 1080i/50 Hz, 1080i/60 Hz, 1080p/24
Hz, 1080p/50 Hz, 1080p/60 Hz, 3840×2160/24 Hz, 3840×2160/25 Hz,
3840×2160/30 Hz, 3840×2160/50 Hz(4:2:0), 3840×2160/60 Hz(4:2:0),
4096×2160/24 Hz*3D Signal Frame Packing
720p/50 Hz, 720p/60 Hz, 1080p/24 Hz
Side-by-side 1080i/60 Hz, 1080p/60 Hz, 1080i/50 Hz, 1080p/50 Hz, 1080p/24 Hz,
720p/50 Hz, 720p/60 Hz
Top-and-bottom 720p/50 Hz, 720p/60 Hz, 1080p/24 Hz * The display image...

Indicator Display on the Main Unit
Meaning of the lighting figures
.Operation mode display
Displays using the different colors and solid/blinking light of the “STANDBY/ON” indicator.
. Estimated timing for lamp replacement
Displays using the solid/blinking light of the “LAMP” indicator. The “STANDBY/ON” indicator, which shows the operating
mode of the unit, is displayed simultaneously as described above.
.78OthersThe indicator appears blinking. The indicator lights up....

Warning display
You can tell the details of a warning from the (repeated) displays of the “WARNING” and “LAMP” indicators. The
“STANDBY/ON” indicator, which shows  the 
operating mode of the unit, is displayed simultaneously as described above.
The Warning mode is activated once the message is displayed. Projection is interrupted, and the cooling fan is turned
on for about 100 seconds.
The power cannot be turned on again while cooling is in progress. Check the following after cooling is complete....

Dimensions
(Unit: mm)Top Surface
. Front
. Bottom Surface
. Rear Surface
. 0
The dimensions are identical for all the models. 80Others5
472
455
Lens Ø6024
103.5
178.5
227.5
Lens Center 337 59
91 290
Lens 92 11032 110Lamp Cover