JVC Projector Dla X500r Instructions Manual

Fine-tuning the Image Quality
Adjusting the Output Value of the Projected Image (Gamma)
You can adjust the output value of the projected image with respect to the video signal input.
Example of gamma adjustment
The overall image appear brighter with respect to the original image, making the dark areas more visible.
.Increases the contrast with respect to the original image, creating a greater sense of depth.
. 1
Press the [GAMMA] button
0 Pressing the [GAMMA] button each time switches the setting in...

Gamma Settings for Different “Color Profile”
 S RColor Profile Selectable Settings
DescriptionFilm 1
Film 1 Image is close to the characteristics of Eastman Kodak Company movie
films.
Film 2 Places more emphasis on the gradation compared to the “Film 1” setting.
Custom 1 to Custom 3 Fine-tunes the gamma setting according to the user’s preference. Film 2
Film 1 Image is close to the characteristics of FUJIFILM Corporation movie films.
Film 2 Places more emphasis on the contrast compared to the “Film 1”...

2
Adjust to the preferred setting Item
Description Setting
Color Selection Select “Color Selection”, and select the color to adjust White/Red/Green/Blue
Picture Tone Adjusts the overall brightness automatically for a well-balanced result without compromising the gradation of the image. -16 (darkens image for an
underexposed effect) to +16
(brightens 
image 
for an 
overexposed
effect)
Dark Level
Adjusts the dark areas of the input image. (Each of White/Red/
Green/Blue can be adjusted.)
0 To do so, use...

Reducing the After-image of Fast-moving Images (Clear Motion Drive (C.M.D.))
Optimal interpolation according to the content is made possible with the new high-definition image interpolation
technique that supports 3D images.
For some scenes, interpolation may cause distortion in the image. In this case, set to “Off”.
. 1
Press the [C.M.D.] button
0 Pressing the [C.M.D.] button each time switches the mode in the following
sequence: “Off” "“Low”"“High”"“Inverse Telecine”" “Off”... Setting...

Adjustments and Settings in the Menu
Pressing the [MENU] button displays the menu.
Press the [JKH I] keys to select an item, followed by pressing the [OK] button to confirm the selection. List of Menu Items
Picture Adjust
I Picture Mode ....................................................................................................................................................  p. 35
9   Clear Black...

Installation
I Lens Control ....................................................................................................................................................  p. 27
9   Focus ..........................................................................................................................................................  p. 27
9   Zoom...

Picture Adjust
Picture Mode
You can adjust the image quality according to the type of video image you are viewing. Æ “Setting the Picture Mode”  （p. 35）
Clear Black
Adjusts the difference in brightness in an image electrically to produce an image with contrast. Setting
Description
Off Does not perform correction.
Low Mode with a mild effect.
High Mode with a strong effect.Lamp Power
The brightness of the lamp can be set to “Low” or “High”. 0 The factory setting varies with the “Picture Mode”.
0...

Color Profile
By setting the “Color Profile” (color space information) according to the “Picture Mode”, you can fine-tune the image
quality according to the movie you are viewing. Æ “Setting the Color Profile”  （p. 36）
Color Management
Each of the colors is adjustable according to the user’s preference. Æ “Adjusting to the Preferred Color (Color Management)”  （p. 38）Color Temp.
For setting the color temperature of the video image. 0 When “Picture Mode” is set to “THX” and when “Color Profile” is set to...

MPC Level
You can enjoy natural, expressive 4K images with a stronger sense of depth. Æ “Adjusting Movies for Increased Expressiveness (Multiple Pixel Control)”  （p. 39）
4K e-shift Switches the display resolution. 0 Setting values: On (4K), Off (2K)
Original Resolution
For selecting a resolution for the content you are viewing. 0 Setting values: Auto, 4K, 1080p, 1080i/720p, and 480p
* The  default “Original Resolution” setting is “Auto”, which switches the resolution automatically according to the type...

Tint
For adjusting the hue of the video image. 0 Setting range: -50 (reddish) to +50 (greenish)
* Adjustment cannot be made when “Color Profile” is set to “x.v.Color”. Input Signal
Input Level
For setting the dynamic range (gradation) of the video input. 0 If the dynamic range is not appropriate, the bright areas become overexposed, and the dark areas become
underexposed. Setting
Description
Auto Sets the input signal level automatically.
Standard Select this setting if you are inputting video signals...