JVC Gz Ex310bu User Manual

							Tripod Mounting
This unit can be mounted on a tripod (or monopod). This is useful for
preventing camera shake and recording from the same position.
.
0To prevent this unit from falling off, check the tripod mounting screw holes
and positioning holes on the unit carefully before mounting, and turn thescrews until they are fastened firmly.
Caution : 
0 To prevent injuries or damages which may result if this unit falls off, read
the instruction manual of the tripod (or monopod) to be used and make
sure that it is securely attached.
Memo : 
0 It is recommended to use a tripod or monopod when recording in
conditions prone to camera shake (such as in dark places or when zoomed to the telephoto end).
0 Set the image stabilizer to  001C (OFF) when using a tripod for recording.
“Reducing Camera Shake” ( A p. 52)Using this Unit Overseas
The shape of the power outlet varies according to countries and regions.
To charge the battery pack, you need a converter plug that matches the
shape of the outlet.
“Charging the Battery Pack Overseas” ( A p. 21)
Change the date and time display to the local time by selecting your travel destination in “AREA SETTING” of “CLOCK ADJUST”.
“Setting the Clock to Local Time when Traveling” ( A p. 22)
When “ON” is selected in “DST SETTING” of “CLOCK ADJUST”, the time is
set 1 hour ahead.
“Setting Daylight Saving Time” ( A p. 22)
Charging the Battery Pack Overseas
The shape of the power outlet varies according to countries and regions.
To charge the battery pack, you need a converter plug that matches the
shape of the outlet.
.
Getting Started21 
						

							Setting the Clock to Local Time when Traveling
Change the date and time display to the local time by selecting your travel
destination in “AREA SETTING” of “CLOCK ADJUST”.
Restore the region settings after you returned from the trip.
1 Tap “MENU”.
.
2Tap “SETUP”.
.
3Tap “CLOCK ADJUST”.
.
0Tap  001F or  001E to scroll the screen.
4 Tap “AREA SETTING”.
.
5Select the area you are traveling to and tap “SAVE”.
.
0Time difference between the selected city and the GMT (Greenwich
Mean Time) is displayed.
0 Tap  001C or  001D to select the city name.
Memo : 
0
Setting “AREA SETTING” changes the clock time such that time difference
is accounted for.
After returning to your country, re-select the region that was set initially to restore the original clock settings.
0 The following is a screen of the model with Wi-Fi functions.Setting Daylight Saving Time
When “ON” is selected in “DST SETTING” of “CLOCK ADJUST”, the time is
set 1 hour ahead.
1 Tap “MENU”.
.
2Tap “SETUP”.
.
3Tap “CLOCK ADJUST”.
.
0Tap  001F or  001E to scroll the screen.
4 Tap “DST SETTING”.
.
5Tap “ON”.
.
Memo : 
0What is daylight saving time?
Daylight saving time is the system of setting the clock 1 hour ahead for a
fixed period in summer.
It is used mainly in the Western countries.
0 Restore the daylight saving time settings after you returned from the trip.
0 The following is a screen of the model with Wi-Fi functions.Getting Started22 
						

							Optional Accessories
You can record for a longer time by using the optional battery pack.Product NameDescriptionBattery Pack
BN-VG114U
BN-VG121U
BN-VG138U0 Provides a longer recording time. It can also be
used as a spare battery pack.Battery Charger
0 AA-VG1
0 AA-VF80 Enables the battery pack to be charged without
using this unit.HDMI Mini Cable
0 VX-HD310
0 VX-HD3150Allows viewing in high picture quality when
connected to a TV.
0 Transmits video, audio, and control signals
between devices.Memo : 
0 The optional accessories above may not be supported in some regions.
0 For more information, refer to the catalog.
0 For details on the provided accessories, refer to “Verifying the
Accessories”.
“Verifying the Accessories” ( A p. 11)
Approximate Recording Time (Using Battery)
o
GZ-EX355/GZ-EX310
Battery PackActual recording timeContinuous recording time
(Maximum Recording Time)BN-VG114U
(Supplied)1 h 5 m2 hBN-VG121U1 h 40 m3 h 5 mBN-VG138U3 h5 h 30 m
o GZ-E300
Battery PackActual recording timeContinuous recording time
(Maximum Recording Time)BN-VG107U
(Supplied)40 m1 h 5 mBN-VG114U1 h 15 m2 h 10 mBN-VG121U1 h 55 m3 h 15 mBN-VG138U3 h 20 m5 h 45 m
0 The above are values when “MONITOR BRIGHTNESS” is set to “3”
(standard).
0 The actual recording time is an estimate in case that such operations as
zooming is used or recording is stopped repeatedly. It may be shorter inthe actual usage.
(It is recommended to prepare battery packs ready for three times the
expected recording time.)
0 When the battery life is reached, the recording time becomes shorter even
if the battery pack is fully charged.
(Replace the battery pack with a new one.)
Getting Started23 
						

							Taking Videos in Auto Mode
You can record without worrying about the setting details by using the
Intelligent Auto mode. Settings such as exposure and focus will be adjusted
automatically to suit the shooting conditions.
0 In case of specific shooting scenes such as person etc., its icon is
displayed on the screen.
0 Before recording an important scene, it is recommended to conduct a trial
recording.1 Open the lens cover.
.
2Open the LCD monitor.
.
0Check if the recording mode is  0010
.
0 If the mode is  0011
 still image, tap  0011
 on the recording screen to display
the mode switching screen.
Tap  0010
 to switch the mode to video.
3 Check if the recording mode is  0039
 Intelligent Auto.
.
0 If the mode is  0015 Manual, tap  0015 on the recording screen to display
the mode switching screen.
Tap  0039 to switch the recording mode to Intelligent Auto.
.
4 Press the START/STOP button to start recording.
.
0Press again to stop.
0 Some displays disappear after approximately 3 seconds.
Use the  002B button to change the displays.
Memo : 
0
Depending on the subject and shooting conditions, recording may not be
performed properly even in the Intelligent Auto mode.Indications During Video Recording
.
Display IconDescriptionAVideo QualityDisplays the icon of the “VIDEO QUALITY”
setting selected in the recording menu.
“ VIDEO QUALITY ” ( A p. 228)BTOUCH PRIORITY
AE/AFDisplays the setting of “TOUCH PRIORITY AE/
AF”. By default, it is set to “FACE TRACKING”
.
“Capturing Subjects Clearly (TOUCH
PRIORITY AE/AF)” ( A p. 44)CTimeDisplays the current time.
“Clock Setting” ( A p. 18)DImage StabilizerDisplays the image stabilizer setting.
“Reducing Camera Shake” ( A p. 52)ERecording MediaDisplays the icon of the media where videos
are recorded to.
The recording media can be changed.
(GZ-EX355 only)
“REC MEDIA FOR VIDEO (GZ-EX355)”
( A  p. 242)
“REC MEDIA FOR IMAGE (GZ-EX355)”
( A  p. 242)FBattery IndicatorDisplays the approximate remaining battery
power during use.
“Checking the Remaining Recording Time”
( A  p. 61)GRecording ModeDisplays the current recording mode of  0039
(Intelligent Auto) or  0015 (Manual).HSetting Scenes of
Intelligent AutoDisplays scenes detected automatically in the
Intelligent Auto function. Multiple scenes may
be detected.ISEAMLESS
RECORDING
(GZ-EX355 only)Displays the seamless recording icon when it
is set.  0028 appears if seamless recording
cannot be performed.
“SEAMLESS RECORDING (GZ-EX355)”
( A  p. 227)JRemaining
Recording TimeDisplays the remaining time for video
recording.
“Checking the Remaining Recording Time”
( A  p. 61)KScene Counter
(Recorded Time)Displays the elapsed time of the video that is
currently being recorded.Recording24 
						

							oScenes of Intelligent AutoDisplay IconDescription0023Captures one’s skin beautifully.0018Allows people to be captured naturally.0022Record a group of people with the most suitable
settings.0019Record the smiling face clearly.0015Records while focusing on a near object.001DFocuses at a far distance and captures a sharp
image with vivid colors.001CRecords in dark places with minimal noise in the
overall image.0016Allows night scenes to be captured accurately with
minimal noise in the overall image.0020Prevents colors from fading even when recording in a bright environment, such as snowfield andbeaches.001APrevents colors from fading when recording a
subject in a spotlight.0025Reproduces the green color of trees vividly.001BReproduces the colors of sunset naturally.0024Adjusts settings so that the subject does not
appear too dark due to backlight.0027Records while emphasizing the brightness of the colors.0017Reproduces the natural colors of the outdoorsduring the day.001FReproduces the natural colors of the indoors in a
cold-color illumination.001EReproduces the natural colors of the indoors in a
warm-color illumination.0021Selects the most suitable settings for handheld
shooting.0026Selects the most suitable settings when a tripod is
used for shooting.Memo : 
0 Scenes can be detected according to the shooting conditions and
automatically adjusted in Intelligent Auto mode.
0 Multiple scenes may be detected depending on the recording conditions.
0 Some functions may not work properly depending on the shooting
conditions.Operation Buttons for Video Recording
.
Operation ButtonsDescriptionAVideo/Still Image
ModeSwitches between video and still image
modes.BT/W ZoomAllows the same functions as the zoom
lever to be performed.
Camera shake that often occurs when
using the zoom lever can be minimized.
“Zooming” ( A p. 30)CPlayback ModeSwitches to the playback mode.D / ERecording Start
003B
Record-Standby
003CFunctions as the START/STOP button.FMark  0006By tapping the icon while recording is in
progress, you can mark a particular scene
to make it easier to find it.GMENUDisplays the various menus of video
recording.
“Operating the Menu” ( A p. 224)HDisplay Button  002BSwitches the display between full ( 002A) and
simple ( 002B) with every tap of the button.
0 Simple display: Some displays
disappear after approximately 3
seconds.
0 Full display: Displays everything. The
display button changes from  002B to  002A .
0 When the power is turned off, simple
display ( 002B) will be set.IRecording Mode
0039 /0015Switches the recording mode.Recording25 
						

							Using the Silent Mode
When the Silent mode is used, the LCD monitor darkens and operation
sounds will not be output. Use this mode to record quietly in dark places such as during a performance.
.
0Press and hold the SILENT button to turn on the Silent mode. The Silent
mode can be cancelled by holding down the button again.
0 0017  appears when “SILENT MODE” is set to “ON”.
Useful Settings for Recording
0 When “QUICK RESTART” is set to “ON”, this unit turns on immediately if
you open the LCD monitor within 5 minutes after the power is turned off
by closing the monitor.
“ QUICK RESTART ” ( A p. 239)
0 When “AUTO POWER OFF” is set to “ON”, this unit turns itself off
automatically to conserve power when it is not operated for 5 minutes.
(only when using the battery pack)
“ AUTO POWER OFF ” ( A p. 239)
0 When “TOUCH PRIORITY AE/AF” is set to “FACE TRACKING”, this unit
detects faces and automatically adjusts its brightness and focus to record the faces more clearly.
“Capturing Subjects Clearly (TOUCH PRIORITY AE/AF)” ( A p. 44)
0 If the remaining space on the built-in memory runs out while “SEAMLESS
RECORDING” is set to “ON”, recording continues after switching to the
SD card. (GZ-EX355 only)
“SEAMLESS RECORDING (GZ-EX355)” ( A p. 227)
0 When “DATE/TIME RECORDING” is used, the date and time can be
recorded together with the video.
“Recording Videos with Date and Time” ( A p. 60)
Caution : 
0
Do not expose the lens to direct sunlight.
0 Do not use this unit in the rain, snow, or places with high humidity like the
bathroom.
0 Do not use this unit in places subject to excessive humidity or dust, as well
as places exposed to steam or smoke directly.
0 The power may turn off to protect the circuit if the temperature of this unit
rises too much.
0 Do not remove the battery pack, AC adapter, or SD card when the access
lamp is lighted. The recorded data may become unreadable.
0 This unit is a microcomputer-controlled device. Electrostatic discharge,
external noise and interference (from a TV, a radio, etc.) might prevent it
from functioning properly. In such a case, turn off the power, then remove
the AC adapter and battery pack. This unit will be reset.
0 Disclaimer
- We shall not be held responsible for loss of recorded contents when
recording videos/audio or playback cannot be operated due to malfunctions in this unit, provided parts, or SD card.- Once deleted, recorded contents (data), including data loss due to
malfunctions in this unit, cannot be restored. Please be forewarned.
- JVC will not be responsible for any lost data. Please be forewarned. - In order for quality improvement, defective recording medium is subject
to be analyzed. Therefore, it may not be returned.
Memo : 
0 Check the remaining recording time in the media before you start shooting.
If there is not enough space, move (copy) the data to a computer or disc.
0 When there are many files in the media, it may take time for them to be
displayed on the playback screen. Wait for a while as the access lamp
appears blinking, which indicates normal operation.
0 Do not forget to make copies after recording!
0 Recording stops automatically as it cannot be performed for 12 or more
consecutive hours according to specifications.
(It may take some time to resume recording.)
0 For long recordings, the file is split into two or more files if the size exceeds
4 GB.
0 You can connect this unit to the AC adapter to record for long hours
indoors.
0 Depending on the shooting conditions, the four corners of the screen may
appear dark, but this is not a malfunction. In this case, change the shooting conditions by moving the zoom lever, etc.
Capturing Still Images During Video Recording
.
0 “PHOTO” lights up on the screen when a still image is being captured.
.
0The still images captured during video recording are saved to the
destination set in “REC MEDIA FOR IMAGE”.
Memo : 
0 The size of the still image that is captured in the video mode is 1,920 x
1,080.
0 Operation is invalid under the following conditions:
- when menu is being displayed
- when remaining recording time or battery power is being displayed - when any functions in “SPECIAL RECORDING” is setRecording26 
						

							Taking Still Images in Auto Mode
You can record without worrying about the setting details by using the
Intelligent Auto mode.1 Open the lens cover.
.
2Open the LCD monitor.
.
0Check if the recording mode is  0011
.
0 If the mode is  0010
 video, tap  0010
 on the recording screen to display the
mode switching screen.
Tap  0011
 to switch the mode to still image.
3 Check if the recording mode is  0039
 Intelligent Auto.
.
0 If the mode is  0015 Manual, tap  0015 on the recording screen to display
the mode switching screen.
Tap  0039 to switch the recording mode to Intelligent Auto.
.
4 Set the focus on the subject.
.
0When focused, the focus icon lights up in green.
5
Take a still image.
.
0PHOTO lights up when a still image is being captured.
0 Some displays disappear after approximately 3 seconds.
Use the  002B button to change the displays.
0 After recording, close the lens cover.
Memo : 
0Depending on the subject and shooting conditions, recording may not be
performed properly even in the Intelligent Auto mode.Recording27 
						

							Indications During Still Image Recording
.
Display IconDescriptionAImage SizeDisplays the icon of the image size.
0 The size of still images can be changed.
“ IMAGE SIZE ” ( A p. 232)BTOUCH PRIORITY
AE/AFDisplays the setting of “TOUCH PRIORITY AE/ AF”. By default, it is set to “FACE TRACKING”
.
“Capturing Subjects Clearly (TOUCH
PRIORITY AE/AF)” ( A p. 44)CTimeDisplays the current time.
“Clock Setting” ( A p. 18)DRecording mediaDisplays the icon of the media where still
images are recorded to.
The recording media can be changed.
“REC MEDIA FOR IMAGE (GZ-EX355)”
( A  p. 242)EBattery IndicatorDisplays the approximate remaining battery
power during use.
“Checking the Remaining Recording Time”
( A  p. 61)FRecording ModeDisplays the current recording mode of  0039
(Intelligent Auto) or  0015 (Manual).GSetting Scenes of
Intelligent AutoDisplays scenes detected automatically in the
Intelligent Auto function. Multiple scenes may
be detected.HRemaining Number
of ShotsDisplays the remaining number of shots for still image recording.
“Approximate Number of Still Images (Unit: Number of Shots)” ( A p. 62)IRecording in
Progress“PHOTO” appears when a still image is being
captured.JFocusLights up in green when focused.KShutter SpeedDisplays the shutter speed.o Scenes of Intelligent AutoDisplay IconDescription0023Captures one’s skin beautifully.0018Allows people to be captured naturally.0022Record a group of people with the most suitable
settings.0019Record the smiling face clearly.0015Records while focusing on a near object.001DFocuses at a far distance and captures a sharp
image with vivid colors.001CRecords in dark places with minimal noise in the
overall image.0016Allows night scenes to be captured accurately with
minimal noise in the overall image.0020Prevents colors from fading even when recording in a bright environment, such as snowfield andbeaches.001APrevents colors from fading when recording a
subject in a spotlight.0025Reproduces the green color of trees vividly.001BReproduces the colors of sunset naturally.0024Adjusts settings so that the subject does not
appear too dark due to backlight.0027Records while emphasizing the brightness of the colors.0017Reproduces the natural colors of the outdoorsduring the day.001FReproduces the natural colors of the indoors in a
cold-color illumination.001EReproduces the natural colors of the indoors in a
warm-color illumination.0021Selects the most suitable settings for handheld
shooting.0026Selects the most suitable settings when a tripod is
used for shooting.Memo : 
0 Scenes can be detected according to the shooting conditions and
automatically adjusted in Intelligent Auto mode.
0 Multiple scenes may be detected depending on the recording conditions.
0 Some functions may not work properly depending on the shooting
conditions.Recording28 
						

							Operation Buttons for Still Image Recording
.
OperationButtonsDescriptionAVideo/Still Image
ModeSwitches between video and still image
modes.BT/W ZoomAllows the same functions as the zoom
lever to be performed.
Camera shake that often occurs when
using the zoom lever can be minimized.
“Zooming” ( A p. 30)CPlayback ModeSwitches to the playback mode.DSnapshot
0014Functions as the SNAPSHOT button.
However, focus cannot be set by pressing
halfway.EMENUDisplays the various menus of still image
recording.
“Operating the Menu” ( A p. 224)FDisplay Button  002BSwitches the display between full ( 002A) and
simple ( 002B) with every tap of the button.
0 Simple display: Some displays
disappear after approximately 3
seconds.
0 Full display: Displays everything. The
display button changes from  002B to  002A .
0 When the power is turned off, simple
display ( 002B) will be set.GRecording Mode
0039 /0015Switches the recording mode.Using the Silent Mode
When the Silent mode is used, the LCD monitor darkens and operation
sounds will not be output. Use this mode to record quietly in dark places such as during a performance.
.
0Press and hold the SILENT button to turn on the Silent mode. The Silent
mode can be cancelled by holding down the button again.
0 0017  appears when “SILENT MODE” is set to “ON”.
Useful Settings for Recording
0 When “QUICK RESTART” is set to “ON”, this unit turns on immediately if
you open the LCD monitor within 5 minutes after the power is turned off
by closing the monitor.
“ QUICK RESTART ” ( A p. 239)
0 When “AUTO POWER OFF” is set to “ON”, this unit turns itself off
automatically to conserve power when it is not operated for 5 minutes.
(only when using the battery pack)
“ AUTO POWER OFF ” ( A p. 239)
0 When “TOUCH PRIORITY AE/AF” is set to “FACE TRACKING”, this unit
detects faces and automatically adjusts its brightness and focus to record the faces more clearly.
“Capturing Subjects Clearly (TOUCH PRIORITY AE/AF)” ( A p. 44)
Caution : 
0
Do not expose the lens to direct sunlight.
0 Do not use this unit in the rain, snow, or places with high humidity like the
bathroom.
0 Do not use this unit in places subject to excessive humidity or dust, as well
as places exposed to steam or smoke directly.
0 The power may turn off to protect the circuit if the temperature of this unit
rises too much.
0 Do not remove the battery pack, AC adapter, or SD card when the access
lamp is lighted. The recorded data may become unreadable.
0 This unit is a microcomputer-controlled device. Electrostatic discharge,
external noise and interference (from a TV, a radio, etc.) might prevent it
from functioning properly. In such a case, turn off the power, then remove
the AC adapter and battery pack. This unit will be reset.
Memo : 
0 Before recording an important scene, it is recommended to conduct a trial
recording.
0 Depending on the shooting conditions, the four corners of the screen may
appear dark, but this is not a malfunction. In this case, change the shooting conditions by moving the zoom lever, etc.Recording29 
						

							Zooming
The angle of view can be adjusted using zoom.
0 Use the W end (wide angle end) to shoot a wider field of view.
0 Use the T end (telephoto end) to magnify the subject for shooting.
.
0The following zoom options are available:
- Optical Zoom (1 - 40x)
- Digital Zoom (41 – 200x)
0 You can also use the zoom (T/W) button on the touch screen to zoom.
.
Memo : 
0When digital zoom is used, the image becomes grainy as it is digitally
enlarged.
0 The zoom ratio range can be changed.
“ ZOOM ” ( A p. 228)Manual Recording
You can adjust settings, such as brightness, by using the manual mode.
Manual recording can be set for both video and still image modes.
*The following is a screen of the model with Wi-Fi functions.1 Open the lens cover.
.
2Open the LCD monitor.
.
0Set the recording mode to either  0010
 video or  0011
 still image.
0 To switch the mode between video and still image, tap  0010
 or  0011
 on the
recording screen to display the mode switching screen.
Tap  0010
 or  0011
 to switch the mode to video or still image respectively.
(You can also use the  0010
/0011
 button on this unit.)
3 Select the Manual recording mode.
.
0If the mode is  0039 Intelligent Auto, tap  0039 on the recording screen
to display the mode switching screen.
Tap  0015 to switch the recording mode to Manual.
.
4 Tap “MENU”.
.
0The top menu appears.
5 Tap “RECORD SETTING”.
Recording30